Hardware Solutions for Gas Utilities User Manual
(Optional) Click View Trademarks to see a list of trademarked products. To close the Trademarks screen and return to
the login screen, click Close.
Figure 8: Trademarks screen
3. Click the OK button on the login screen to open the software application.
Result: The Single Endpoint Updater screen is displayed with the software main menu along the left side as shown in
Figure 9.
Figure 9: Single endpoint updater screen
Login is complete.
Remember to set the COM ports for any hardware attached to the computer before using the software application for the first
time. Refer to "Settings" on page13 for instructions on setting the COM ports.
Exiting the Software
To close and exit the software application, click the X in the top right corner of any screen.
SOFTWARE STARTUP / EXIT
Page 12 April 2014ORION® SE/ME Firmware Updater