Hardware Solutions for Gas Utilities User guide

ORION® Gas Endpoints, Integral Endpoint for Itron®/Actaris® A-Series Commercial Gas Meters
ADDING ADDITIONAL LABELS
If the utility chooses to add an additional label, follow the steps below. If not, see "Assemble The Itron Index Into The Orion
Adapter Plate" on page 10.
Figure 5: ORION endpoint label placement
1. With a needle nose pliers pull the plastic cover plate down and o. See Figure 6.
Figure 6: Remove plastic cover
2. Place a new serial number tag above the one that is on the endpoint. See Figure 7.
Figure 7: Serial number tag placement
3. Place the cover plate back on the endpoint. See Figure 8.
Figure 8: Replace plastic cover
Page 8 July 2014