Hardware Solutions for Gas Utilities User guide

ORION® Gas Endpoints, Integral Endpoint for Itron®/Actaris® A-Series Commercial Gas Meters
3. Tighten the four (4) screws with a screwdriver to about 15 inch-pounds. See Figure 23.
Figure 23: Tighten screws on index cover
PROGRAM THE ORION ENDPOINT
Badger Meter uses a handheld programmer/data collector system to process and display screens.
Figure 24: Sample handheld, IR read head and cable
Please reference the Programming Guide for ORION gas endpoints and the manual for the handheld system.
Page 14 July 2014