Hardware Solutions for Gas Utilities User guide

ORION® Gas Endpoints, Integral Endpoint for Itron®/Actaris® A-Series Commercial Gas Meters
ORION SHAFT ADAPTER, ADAPTER PLATE AND ITRON INDEX ASSEMBLY
ON AN ORION ENDPOINT
1. Place the shaft adapter on top of the endpoint pawl. Put one end of the shaft adapter onto one side of the pawl.
See Figure 17.
Figure 17: Shaft adapter placement
2. Push the raised end down to lock the shaft adapter on the pawl. See Figure 18.
Figure 18: Lock shaft of adapter on pawl
3. Place the adapter plate and index on the endpoint. Place them so the meter text faces forward and the index is centered
over the shaft adapter.
Figure 19: Adapter placement on endpoint
Page 12 July 2014