Hardware Solutions for Gas Utilities User guide

ORION® Gas Endpoints, Integral Endpoint for Itron®/Actaris® A-Series Commercial Gas Meters
ASSEMBLE THE ITRON INDEX INTO THE ORION ADAPTER PLATE
Index
Tabs and holes
Top view of adapter plate
Bottom of adapter plate
Adapter locating posts
Figure 10: Itron index and ORION adapter plate
1. Place the Itron index into the ORION adapter plate. Slide the index mounting tabs under the adapter plate. See Figure 11.
Index mounting
tabs and holes
Figure 11: Itron index placement on ORION adapter plate
2. Lock the rear index holes into the locating posts on the adapter plate. See Figure 12.
Bottom view of
adapter plate
Index mounting
tabs and holes
Adapter plate
locating posts
Figure 12: Lock rear index poles into locating posts
3. Set this assembly aside for use later.
Figure 13: Completed assembly of Itron index and ORION adapter plate
Page 10 July 2014