Hardware Solutions for Gas Utilities Owner manual

Installation Data
SENSUS, INVENSYS, ROCKWELL AND EQUIMETER GAS METERS
Drive Dial: 1 cubic foot per revolution (24-tooth gear) uses ORION for Sensus Integral for 1 Cu. Ft. drive (24-tooth gear).
Drive Dial: 2 cubic foot per revolution (11-tooth gear) uses ORION for Sensus Integral for 2 Cu. Ft. drive (11-tooth gear).
Meter and Indexes Before Installation of New ORION Endpoint
INDEX REMOVAL FROM A SENSUS GAS METER
1. Use a large screwdriver to puncture and remove tamper plugs, if present.
2. Use a large screwdriver to remove and discard the four (4) mounting screws and the cover.
1 FT³ Odometer
Style Index
2 FT³ Odometer
Style Index
2 FT³ Dial Index
(4-11)
Page 7