Hardware Solutions for Gas Utilities Owner manual

ORION® Integral Endpoint for Sensus® Residential Gas Meters
PLACE THE ENDPOINT AND INDEX ON A SENSUS GAS METER
1. Verify that the rear endpoint gasket does not interfere with the endpoint gear.
2. Align the rear endpoint gear and the 11- or 24-tooth gas meter gear.
Place the three (3) endpoint guide pins around the outside of the meter casting
Three (3) Guide Pins
Master Casting
11-Tooth Gas Meter Gear
Endpoint Gear
Three (3) Guide Pins
Master Casting
24-Tooth Gas Meter Gear
Endpoint Gear
Endpoint Gear
Endpoint Gasket
Page 12
(4-11)