Owner's manual

TROUBLESHOOTING GUIDE
Trouble Remedy
No LCD Display • Check battery voltage. Should be 1.5V DC. Replace if low or dead.
No Rate or Total
Displayed
• Check connection from meter pickup to display input terminals.
• Check turbine meter rotor for debris. Rotor should spin freely.
• Check programming of flow monitor.
Flow Rate Display
Interprets Reading
Constantly
• This is usually an indication of external noise. Keep all AC wires separate from DC wires.
• Check for large motors close to the meter pickup.
• Check for radio antenna in close proximity.
• Try disconnecting the pickup from the monitor pig tail. This should stop the noise.
Flow Rate Indicator
Bounces
• This usually indicates a weak signal. Replace pickup and/or check all connections.
• Examine K factor.
PART NUMBER INFORMATION
B 28 A X X - C S
Power Option
B - Battery
L - Loop
Program Level
A - Advanced
Mounting Style
M - Meter Mount
R - Remote Mount
S - Swivel Mount
H - Hand-Held
Units of Measure
CS - Customer Selectable
REPLACEMENT PARTS
Component Part Number
Keypad B260713
Battery B280601
Battery Tie Wrap B228036
Pickup Cable B222-121
Desiccant Bag B260630
PVC Union B220016
PVC Reducer Bushing B220056
Rubber Washer B228207
Steel Lock Washer B220018
PCB Shield (battery units) B280603
Desiccant Shield B280680
Cord Grip B220103
Flow Monitor, B2800 Flow Monitor – Advanced
Page 20 November 2013