Energy Transmitter Owner's manual

Surface Mount Installation
The 340 BN/MB Btu Energy Transmitter may be mounted to the surface of any panel using double-sided adhesive tape or by
attaching fasteners through the holes in the mounting flanges of the unit.
1.60”
(40.6mm)
3.65”
(92.7mm)
2.95”
(74.9mm)
.88”
(22mm)
.60”
(15mm)
Model: 340 BN/MB
S/N 340-
005100
Comm LED
Data
Industrial
Sensor Input
Shield
Signal
Signal +
Power Out
-
REF
+
_
Btu ENERGY METER
Factory Port
NT PDPU
D.I.C.
Comm
Port
+
-
Power In
AC C /DC
AC L /DC
Output LED
Output
Pulse Out +
Pulse Out -
1
2
3
Temp 1
1
3
Temp 2
2
Input LED
.20”
(5mm)
Figure 1: 340 BN/MB Dimensions
Wall Mounting
Optional metal and plastic enclosures are available to mount the 340 BN/MB Btu Energy Transmitter to a wall when no other
enclosure is used. The enclosure is first attached to the wall using fasteners through its mounting holes.
After wiring, the transmitter may be attached to the enclosure with the terminal headers facing in using the slots in the
mounting flanges. As an alternate mounting arrangement, the 340 BN/MB Btu Energy Transmitter may be fastened to the box
cover using double-sided adhesive tape.
Top
Side
4.50"
4.50"
2.00"
Side
5.125"
3.25" 4.60"
4.60"
Top
Bottom
2.25"
Figure 2: 340 BN/MB Metal (left) and Plastic (right) Box Dimensions
Data Industrial® 340 BN/MB BTU Energy Transmitter
Page 6 July 2012