Specifications
Fan Coil Thermostat Controller
Specification and Installation Instructions
www.neptronic.com Page | 14
Control Mode
To access the Control Mode, press the key. The Control Mode appears for 5 seconds. These options can vary depending on
the options selected at Steps 6 and 7 on page 5.
• Auto (Automatic Cooling or Heating)
• Cooling only (on)
• Heating only (on)
• OFF
Fan Speed Selection Mode
To access the Fan Speed selection mode, press the key. The mode appears for 5 seconds. These options can vary
depending on the fan speed signal and auto mode settings at Step 33 and Step 36 on page 9.
• Automatic speed. This option is available if you have selected Yes (Enable) at Step 36 in Programming Mode.
• Low speed
• Medium speed
• High speed
• Off