Motors | Automation | Energy | Transmission & Distribution | Coatings CFW11 - System Drive Variable Speed Drives
www.weg.net CFW11 - System Drive The CFW11 is a system drive designed for the control of squirrel cage induction motor as well as permanent magnet type ones. Since it was developed for running on Normal and Heavy Duty mode, a big variety of applications can be achieved. Designed for exclusively industrial or professional use, provides increased productivity with excellent performance and an improvement in the quality of the process in which it is used.
www.weg.
www.weg.net Technical Features Built-In DC Link Reactor JJ Allows the VSD to be installed in any network (there is no minimum impedance restriction) JJ Typical power factor (PF) for rated condition: JJ 0.94 for models with three-phase supply JJ 0.70 for models with single-phase 0.70 for models with single-phase supply/three-phase supply = 0.94 JJ Displacement power factor > 0.
www.weg.net Flexibility is Our Philosophy The CFW11 was developed based on Plug & Play philosophy, identifying automatically the accessories plugged in, as well as easy installation and safe operation with no need for extra configuration.
www.weg.net Applications The CFW11 can be used in both simple and sophisticated applications, due to its broad range of functions and easy configuration, installation and operation. The CFW11, through its vectrue inverter technology, presents excellent static and dynamic performance, precise torque and speed control, dynamic response, positioning precision, and high overload capacity.
www.weg.
www.weg.net Intuitive The CFW11 keypad was developed for simple and fast interaction while providing excellent visibility for the user.
www.weg.net Human Machine Interface The keypad can be configured to display reading parameters in three different modes. Status indication g Run g Ready g Configuration g Self-tuning g VSD disabled by fault and the fault number g Last alarm Motor speed BAR GRAPHS LARGE CHARACTERS NUMERIC VALUES Time indication FWD/REV indication Local / Remote indication Soft-key function The keypad displays parameters in a hierarchy mode organized by groups.
www.weg.
www.weg.
www.weg.net Accessories Kit for Power Cable Shielding CFW11 has a kit to simplify the connection of the motor cable shield to ground, providing a low-impedance connection for high frequencies.
www.weg.net Optionals Safety Stop in Accordance with EN 61800-5-2, EN ISO 13849-1, IEC 62061, IEC 61508 Parts 1-7, EN 50178, IEC 60204-1, Cat. 3/PL d acc. and SIL CL2 acc. With the activation of the safety stop function, the PWM pulses of the IGBTs are disabled. Since no torque is applied to the motor thus, it is ensured that the motor remains stopped providing system safety. Note: this optional must be factory fitted (see product coding on page 17).
www.weg.net PLC11 PLC Accessories PLC11 accessory provides the CFW11 with PLC functionality, speed reference generator and motion control functions. It comes in two options: PLC11-01 and PLC11-02 (see differences in the table below). In many applications, these accessories allows the CFW11 to replace an external PLC, reducing application costs.
www.weg.net PLC11 PLC11-01 as CANopen Network Master CANopen slave WLP / WSCAN Software CANopen slave WLP / WSCAN Software 8 Digital and analog I/Os 7 6 Master Master 5 Digital and analog I/O expansion 4 3 Digital and analog I/Os 2 1 Flash Memory Module JJ JJ JJ I t stores CFW11 parameters. It ensures that the programming will not be lost as there is a backup of the parameters It permits the transfer of parameters stored in the flash memory module to the CFW11 and vice versa.
www.weg.net USB Connection Trace Function Trace function is used to register CFW11 variables (like current, voltage, speed, etc.) when a given event occurs in the system (eg.: alarm / fault, overload, overvoltage, etc.). When a given event takes place, the trigger function activates data storage process. The stored variables can be visualized in the form of graphs by using the SuperDrive G2 software. Trace function simulates a 4-channel oscilloscope.
www.weg.
www.weg.net Drive Ratings Normal Duty (ND) Cycle JJ 110% for 60s every 10 minutes JJ 150% for 3s every 10 minutes Heavy Duty (HD) Cycle 150% for 60s every 10 minutes JJ 200% for 3s every 10 minutes JJ Frame A Frame B Frame C Frame D Frame E Frame F Frame G Frame H Sizing the Drive The correct way to select a VSD is matching its output current with the motor rated current. However, the following tables present the expected motor power for each VSD model.
www.weg.net CFW11 - Standard Motor Voltages Between 220 V ac and 230 V ac IEC Power supply Model 1Ø 1/3Ø 200-240 V ac 3Ø 220-230 V ac 3Ø IEC NEMA Heavy duty (HD) 50 Hz 220 V ac 230 V ac 60 Hz 230 V ac NEMA Normal duty (ND) 50 Hz 220 V ac 230 V ac 60 Hz 230 V ac A kW HP A kW HP CFW11 0006 S2 6 1.1 1.5 5 1.1 1 CFW11 0007 S2 7 1.5 2 7 1.5 2 CFW11 0010 S2 10 2.2 3 10 2.2 3 CFW11 0006 B2 6 1.1 1.5 5 1.1 1 CFW11 0007 B2 7 1.5 2 7 1.
www.weg.net CFW11 - Standard Motor Voltages Between 500 V ac and 600 V ac Normal duty (ND) 3Ø 500-600 V ac Power supply Model A 2.9 4.2 7.
www.weg.net CFW11 - IP54 The CFW11 IP54 features an IP54 enclosure that protects the drive from splashing water, corrosion and dust. Improved cooling fans ensure perfect functionality when operating at maximum loading capacity. Its design is suitable for wall mounting with no need for customized panels allowing for severe environments exposure. g Chemical Industry g Petrochemical Industry g Food Industry Same communication protocols from the standard CFW11 can be applied on the CFW11 IP54 version.
www.weg.
www.weg.net Mechanical Mounting Standard Installation A D D B Frame size Minimum mounting clearance with top cover C A mm (in) B mm (in) C mm (in) D mm (in) A 25 (0.98) 25 (0.98) 10 (0.39) 30 (0.39) B 40 (1.57) 45 (1.57) 10 (0.39) 30 (0.39) C 110 (4.33) 130 (5.12) 10 (0.39) 30 (0.39) D 110 (4.33) 130 (5.12) 10 (0.39) 30 (0.39) E 150 (5.91) 250 (9.84) 20 (0.78) 80 (3.15) F, G and H 150 (5.91) 250 (9.84) 20 (0.78) 80 (3.
www.weg.net Mechanical Installation | Panel Assembly Surface Assembly Frame size a2 mm (in) b2 mm (in) c2 mm (in) A 115 (4.53) 250 (9.85) M5 B 150 (5.91) 300 (11.82) M5 C 150 (5.91) 375 (14.77) M6 D 200 (7.88) 525 (20.67) M8 E 200 (7.88) 650 (25.60) M8 F 150 (5.91) 1,200 (47.24) M10 G 200 (7.87) 1,225 (48.23) M10 H 175 (6.89) 1,350 (53.
www.weg.
www.weg.net Technical Data Braking methods Power supply and power range Single phase 220-240 V ac (+10%, -15%) (1.5 to 3 HP) 1.1 to 2.2 kW 220-240 V ac (+10%, -15%) (1.5 to 75 HP) 1.1 to 55 kW Voltage and power range Three phases 380-480 V ac (+10%, -15%) (2 to 600 HP) 1.5 to 415 kW Rheostatic braking (chopper) Does not need braking resistor DC braking Direct current applied to the motor Performance 660-690 V ac (+10%,-15%) (3 to 900 HP) 1.
www.weg.
WEG Worldwide Operations WEG PINTURAS - Pulverlux Buenos Aires Phone: +54 11 4299 8000 tintas@weg.net AUSTRALIA WEG AUSTRALIA Victoria Phone: +61 3 9765 4600 info-au@weg.net www.weg.net/au AUSTRIA WATT DRIVE - WEG Group Markt Piesting - Vienna Phone: +43 2633 404 0 watt@wattdrive.com www.wattdrive.com BELGIUM WEG BENELUX Nivelles - Belgium Phone: +32 67 88 84 20 info-be@weg.net www.weg.net/be ECUADOR WEG ECUADOR Quito Phone: 5144 339/342/317 wegecuador@weg.net www.weg.