Specifications

NEW!
NETWORK & WIRELESS
774
NEW!
NETWORK & WIRELESS
13
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.
kele.com888-397-5353 USA
8.8" (22.35)
4.7" (11.93)
8.25"
3.5"
FRONTIER 2.0 GATEWAY TRANSCEIVERS
MOD9200
Supply Voltage 24 VAC 60 Hz
Supply Current 500 mA
Frequency 902-928 MHz
Protocol BACnet MS/TP, Modbus, LonWorks
(model dependent)
Transmission Power 11 dBm
Range 1 mile (line-of-sight)
Indoor 200 to 500 ft
Receiver Sensitivity -110 dBm
Operating Temperature 32° to 150°F (0° to 66°C)
Operating Humidity 5 to 95% RH (non-condensing)
Dimensions 8.8"H x 4.7"W x 2.25"D
(22.35 x 11.93 x 5.58 cm)
Weight 1.2 lb (0.54 kg)
Approvals FCC certified
Warranty 1 year
DESCRIPTION
The Frontier 2.0 network transceiver utilizes reliable Spread
Spectrum Mesh Network Radio technology. Together with
other Frontier 2.0 sensors and controls, the system can
be used to wirelessly transmit remote sensor readings,
status/alarm indications, control signals and outputs. It is
compatible with any control panels or Automation systems
that utilize BACnet MSTP (MOD9200BNT) or LonWorks®
(MOD9200LON).
Up to 50 separate physical wireless sensor transmitters and/
or wireless remote output (analog & digital) modules can be
used with (1) MOD9200 transceiver. Up to 100 data points
can be monitored and controlled.
The maximum radio transmission distance is dependent on
building type. The maximum open-air transmission distance
is one mile. In a typical commercial building with steel
I-beam construction, concrete floors with reinforcing rod, and
metal stud walls, it can be expected that transmissions will
penetrate vertically through floors and horizontally through
200 to 500 feet of walls, furniture and air.
Generally a wireless system will cover about three floors -
one floor above and one floor below the transceiver location.
In some buildings with favorable transmission characteristics
the system may cover more floors.
FEATURES
• Monitor up to 100 data points; control up to 50 wireless
digital output points and 50 wireless analog output
points
• Multiple MOD9200 Transceivers can be used for large
systems
• MOD9200LON requires standard Lon network
management tool such as LonMaker®, Tridium®
software or equivalent
• MOD9200BNT requires standard BACnet networking
tools
• Simple PC Windows® based wireless sensor setup tool
• Low battery and lost sensor alarm indications per
wireless sensor
• Supports LonWorks® Protocol (MOD9200LON)
• Supports BACnet MSTP Protocol (MOD9200BNT)
• Reliable Spread Spectrum technology
DIMENSIONS
SPECIFICATIONS
MOD9200
March 2014