Specifications

NEW!
NETWORK & WIRELESS
716
NEW!
NETWORK & WIRELESS
13
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.
kele.com888-397-5353 USA
March 2014
EIA-232 COM Connection
Connect the straight through, 9-pin, serial cable:
Modbus EIA-485 Connections
Terminal Block Designation
ORDERING INFORMATION
RLE TECHNOLOGIES PROTOCOL COVERTER
RAPTOR PROTOCOL CONVERTER
MODEL DESCRIPTION
FDS-PC Protocol converter for BMS and NMS integration, Single port
FDS-PC-DP Protocol converter for BMS and NMS integration, Dual port
Power Supply and Ground Connections
RJ45 Ethernet Connection
EIA-232 COM Connection
Connect the straight through, 9-pin, serial cable:
Modbus EIA-485 Connections
WIRING
Item No. Item Description
1
Power 24 VDC/VAC
Power Terminal Block
2
Jack
Power connector for wall wart adapter
3
Status
Status LED
4
EIA-232 Port
DB9 Female connector
5
RX TX EIA-485 LED
Receive/Transmit status LED. Dual Port Protocol Converter contains two additional sets of LEDs.
6
EIA-485 Termination Switch
Dual Port Protocol Converter contains two additional sets of switches; EIA-485 Port 2, the 5-pin port,
can be configured as a 2-wire (half-duplex) or 4-wire (full-duplex) connection.Ports 1 and 3: Switch
1 - unused; Switch 2 - On = 100 Ohm terminationPort 2: Switch 1 -Duplex (On = 4-wire; Off = 2-wire);
Switch 2 - On = 100 Ohm termination
7
EIA-485 Port
Dual Port Protocol Converter contains two additional EIA-485 ports. Port2 (the middle port) can be
configured as a 2-wire or 4-wire connection. In addition to all other supported protocols, Port 3 (the left
most port) of the Dual Port Protocol Converter is BACnet MS/TP capable (Slave only).
8
RJ45 Ethernet Port
10/100 BaseT connector
Terminal Block Designation