Specifications

NEW!
761
NETWORK & WIRELESS
NETWORK & WIRELESS
13
WE MAKE IT EASY.
kele.com 888-397-5353 USA
March 2014
AIC WIRELESS BACNET MSTP AND BACNET IP WIRELESS TRANSCEIVER
WBT900, WBT900-IP
Supply Voltage 24 VAC/VDC (requires isolated power
supply)
Supply Current 100 mA @ 24 VAC
Frequency 902-928 MHz
Connections RPSMA female
Protocol
WBT900-K BACnet MS/TP
WBT900-IP-K BACnet IP
Transmission Power +21 dBm (4 Watts EIRP when used
with 15 dBi antenna)
Range Up to 40 miles (64 km)- Requires 15
dBi antenna
Receiver Sensitivity -97 dBm at 10e-4 BER
(-112 dBm with 15 dBi antenna)
Modulation DSSS (Direct Sequence Spread
Spectrum)
Channels 12 non-overlapping
Operating Temperature -4° to 158°F (-20° to 70°C)
Operating Humidity 10 to 90% RH (non-condensing)
Dimensions 4.3"H x 1.75"W x 3.35"D
(10.9 x 8.5 x 4.45 cm)
Weight 0.65 lb (0.28 kg)
Approvals FCC ID: R4N-AW900M IC:5303A-
AW900M
RoHS Statement Ye s
Warranty 1 year
DESCRIPTION
The WBT900-K and WBT900-IP-K transceivers allow you
to install a close or long range, non line-of-sight, point-to-
multipoint, wireless BACnet MSTP or BACnet IP network, at a
fraction of the cost of installation labor, conduit and cable.
The WBT900-K and WBT900-IP-K transceivers are plug
and play, requiring no special programming tools or network
management software.
FEATURES
902-928 MHz frequency provides excellent non-line-of-
sight performance to penetrate foliage, building walls,
and floors
Highest Quality of Service (QoS) available-synchronous
point-to-multipoint protocol enables extremely low data
latency and jitter
128 bit encrypted payload protection provides secure
data delivery
Simple plug-and-play setup with minimal configuration
required
Flexible input power, 12-24 VAC/DC
Up to 50 mile range
USB
Connection
Wire Channel
Display
Link Quality
Display
LED Indication
RS485
Connection
Power 24
VAC/VDC
WIRING
SPECIFICATIONS
WBT900-K
Wireless Channel
Display
Link Quality
Display
LED Indication
Ethernet
Connection
Power 24
VAC/VDC
WBT900-IP-K
RD3DB
RD5DB
ANTENNA SELECTION CHARTS