Specifications

NEW!
759
NETWORK & WIRELESS
NETWORK & WIRELESS
13
WE MAKE IT EASY.
kele.com 888-397-5353 USA
March 2014
AIC WIRELESS ETHERNET TRANSCEIVER
AIC900E
Supply Voltage 24 VAC/VDC (requires isolated power
supply)
Supply Current 100 mA @ 24 VAC
Frequency 902-928 MHz
Connections RPSMA female
Protocol Ethernet
Tranmission Power +21 dBm (4 Watts EIRP when used
with 15 dBi antenna)
Range Up to 40 miles (64 km)- Requires 15
dBi antenna
Receiver Sensitivity -97 dBm at 10e-4 BER (-112 dBm
with 15 dBi antenna)
Modulation DSSS (Direct Sequence Spread
Spectrum)
Channels 12 non-overlapping
Operating Temperature -4° to 158°F (-20° to 70°C)
Operating Humidity 10 to 90% RH (non-condensing)
Dimensions 4.3"H x 1.75"W x 3.35"D
(10.9 x 8.5 x 4.45 cm)
Weight 0.65 lb (0.28 kg)
Approvals FCC ID: R4N-AW900M IC:5303A-
AW900M
RoHS Statement Ye s
Warranty 1 year
DESCRIPTION
The AIC900E-K Series of wireless ethernet devices
are readily available for any building automation, control
or monitoring application. The devices are a reliable
lowcost alternative to long runs of communication cable to
previously hard to reach locations, due to a lack of existing
communications architecture. The AIC900E-K Series
wireless devices are shipped ready to install, with a true plug-
and-play set-up requiring no special programming or network
management tools.
FEATURES
• 902-928 MHz frequency provides excellent non-line-of-
sight performance to penetrate foliage, building walls,
and floors
• Highest Quality of Service (QoS) available-
synchronous point-to-multipoint protocol enables
extremely low data latency and jitter
• 128 bit encrypted payload protection provides secure
data delivery
• Simple plug-and-play setup with minimal configuration
required
• Flexible input power, 12-24 VAC/DC
• Up to 40 mile range
SPECIFICATIONS
AIC900E-K
Wireless Channel
Display
Link Quality
Display
LED Indication
Ethernet
Connection
Power 24
VAC/VDC
WIRING
RD3DB
RD5DB
ANTENNA SELECTION CHARTS