Specifications

NEW!
829
NETWORK & WIRELESS
NETWORK & WIRELESS
13
WE MAKE IT EASY.
kele.com 888-397-5353 USA
March 2014
ENOCEAN WIRELESS WINDOW/DOOR SENSOR
E3T-MDCCP
DESCRIPTION
The ILLUMRA Wireless Door/Window Sensor maximizes
the energy savings of heating and air conditioning systems
by providing wireless status of windows and/or doors. The
sensor uses a magnet contact switch that is powered by a
solar cell and communicates with a wide variety of ILLUMRA
products.
Energy waste can be reduced by 20 to 60 percent by
disabling blowers and/or adjusting temperature setpoints
in HVAC systems when windows and doors are left open.
The wireless Door/Window Sensor is a key component to
reducing energy waste in hotel, condominium and dormitory
buildings.
These sensors communicate with ILLUMRA's E3R-x and
E9R-x series of receivers and E3X-x and E9X-x series of
transceiver controllers (model frequency dependent).
FEATURES
• Solar powered — when fully charged, can run in total
darkness for several days
• No batteries - No Maintenance
• Install in minutes
• Eliminate the need to pull wires to sensors
ORDERING INFORMATION
MODEL DESCRIPTION
E3T-MDCCP Window/door sensor with magnet contact, 315 MHz
E9T-MDCCP Window/door sensor with magnet contact, 902 MHz
Supply Voltage Self-powered, integrated solar cell
Transmit Frequency 315 MHz, 902 MHz
Transmit Range 15-60 feet
Communication EnOcean wireless
Operating Temperature -4° to 140°F (-20° to 60°C)
Operating Humidity 0-95% RH non-condensing
Enclosure Plastic
Mounting Screws / 2 sided tape
Dimensions 0.62"W x 3.86"H x 0.81"L
(1.57 x 9.80 x 2.06 cm)
Weight 0.11 lbs (0.05 kg)
Approvals FCC, IC
Warranty 3 years
SPECIFICATIONS
E3T-MDCCP