Instructions / Assembly

ManualsBrandsBackyard Discovery ManualsShedsReady Shed John Deere 8 x 8 Prefab Wood Storage Shed with Floor Decking, Shingles and All Hardware Included

SHINGLE COURSE - START

START HERE

- 7/8" ROOFING NAIL GALV. - H100446

(8)

NOTE:

START SHINGLES WITH 1/2"

OF OVERHANG OFF THE

EDGES OF THE SHED AND

FLUSH WITH THE STARTER

SHINGLES.

FULL - ASPHALT SHINGLE 12 x 36

(1) 1 - ASPHALT SHINGLE 12 x 30

(1)

IMPORTANT NOTE:

SHINGLE #1 STARTS APPROXIMATELY 5 1/4"

ABOVE THE BOTTOM EDGE OF THE PRIOR

SHINGLE.

LEFT SIDE

RIGHT SIDE

•

WORK RIGHT TO LEFT WHEN

INSTALLING SHINGLE COURSES.

Full Rain Slot

5 1/4

Notch

Notch

Tar / Sealing Strip

6 3/4 TO NAILS

Half Rain Slot

NAIL ON TOP EDGE OF SEAL STRIP.

1"

1"

NOTE NAIL PLACEMENT:

ONE NAIL ON EACH END

OF SHINGLES AND ONE

NAIL OVER EVERY RAIN

SLOT. USE

DIMENSIONS ABOVE

FOR NAIL LOCATIONS.

•

Familiarize yourself with a 3-Tab Shingle.

SHINGLE NAIL PATTERN

NOTE: SOME NAILS

ARE'NT SHOWN IN

THE FIRST COURSE

IN THIS

PRESENTATION.

PRE-CUTT SHINGLES WILL HAVE A NUMBER STAMPED ON THE

SHINGLE. ARRANGE THESE SHINGLES AS SHOWN TO GET

DESIRED RESULTS. (FULL SHINGLES ARE NOT NUMBERED)

1

33

1/2

FLUSH

ASPHALT SHINGLE 12 x 30

(1 PLC)

7/8" ROOFING NAIL GALV.

(11 PLCS)

5 1/4

1

FULL

FULL

ASPHALT SHINGLE 12 x 36

(1 PLC)