PARKWAY Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 1-800-856-4445 Wooden Play Set Model: #65515 • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Register your new swing set on-line @ www.swingsetsonline.com (you will also find any updates on assembly instructions and information to order replacement parts) Features the fastening system. Save this assembly manual for future reference in the event that you need to order replacement parts.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto.
Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) Wood Chips 7' (2.13m) 10' (3.05m) 11' (3.35m) 10' (3.05m) Double-Shredded bark mulch 6' (1.83m) 10' (3.05m) 11' (3.35m) 7' (2.13m) Engineered Wood Fibers 6' (1.83m) 7' (2.13m) >12' (3.66m) 6' (1.83m) Fine Sand 5' (1.52m) 5' (1.
Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21.
Owner’s Manual Play Set Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment.
Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY 9 HANDBOOK X3.
Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the playset? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 30'-6 1/8" [9.3] Safe Play Zone 18'-6 1/8" [5.6] 23'-1 3/8" [7] 11'-1 3/8" [3.4] 6'-0" [1.8] 6'-0" [1.8] General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs.
Parts Identification Wood Components (NOT TO SCALE) E1 - UPRIGHT - W103616 (1) 1 3/8"x3 3/8"x89 1/2" (36x86x2274) E2 - UPRIGHT - W103617 (1) 1 3/8"x3 3/8"x89 1/2" (36x86x2274) E3 - UPRIGHT - W103618 (1) 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) E4 - UPRIGHT ASSEMBLY - W2A01783 1 3/8"x3 3/8"x89 1/2" (36x86x2274) E71 - MONKEY BAR RAIL - W102369 (2) 1 3/8"x3 3/8"x60 5/8" (36x86x1539) E77 - ANGLE BRACE - W4L04854 (2) 1 3/8"x3 3/8"x74 3/8" (36x86x1890) E78 - MONKEY BAR UPRIGHT - W102370 (2) 1 3/8"x3 3/8"x7
Parts Identification Wood Components (NOT TO SCALE) H74 - LEFT UPRIGHT - W100608 (1) 1"x3 3/8"x50 3/4" (24x86x1290) H75 - RIGHT UPRIGHT - W100609 (1) 1"x3 3/8"x50 3/4" (24x86x1290) H79 - END SUPPORT - W4L04855 (1) 1"x3 1/2"x42" (24x86x1072) H81 - MONKEY BAR BRACE - W100993 (2) 1"x3 3/8"x53 1/4" (24x86x1352) H82 - MONKEY BAR GROUND BOARD - W100994 (1) 1"x3 3/8"x70 3/8" (24x86x1786) K1 - GROUND BOARD - W103686 (1) 5/8"x5 1/4"x60 3/4" (16x134x1542) K2 - WALL SLAT - W4L05808 (1) 5/8"x4 3/8"x39 3/8
Parts Identification Wood Components (NOT TO SCALE) K8 - DOOR ARCH BOARD - W4L05812 (1) 5/8"x5 1/4"x38 5/8" (16x134x982) K80 - SUNBURST HALF MOON - W103694 (2) 5/8"x3 3/4"x10 3/8" (16x96x264) L1 - UPPER WALL RAIL - W103629 (1) 5/8"x4 3/8"x38 5/8" (16x112x982) L2 - UNIVERSAL ARCH BOARD - W103628 (2) 5/8"x4 3/8"x38 5/8" (16x112x982) L3 - MONKEY BAR ARCH BOARD - W103625 (1) 5/8"x4 3/8"x38 5/8" (16x112x982) M2 - FLOOR BOARD - W103634 (1) 5/8"x3 3/8"x40 1/2" (16x86x1030) M3 - ARCHED WALL SLAT - W1036
Parts Identification Wood Components (NOT TO SCALE) M11 - WALL SLAT - W103641 (4) 5/8"x3 3/8"x28 3/8" (16x86x720) M12 - ANGLE BRACE - W103687 (2) 5/8"x3 3/8"x22 5/8" (16x86x576) M13 - WALL SLAT - W103638 (5) 5/8"x3 3/8"x21 1/4" (16x86x540) M14 - WALL SLAT - W103635 (7) 5/8"x3 3/8"x17 5/8" (16x86x448) M15 - UPPER ARCHED WALL SLAT - W103682 (4) 5/8"x3 3/8"x16 7/8" (16x86x430) M16 - UPPER WALL SLAT - W103681 (4) 5/8"x3 3/8"x16 7/8" (16x86x430) M17 - UPPER ARCHED WALL SLAT - W103645 (2) 5/8"x3 3/8"x1
Parts Identification Wood Components (NOT TO SCALE) N3 - HORIZONTAL SUNBURST BOARD - W103683 (2) 5/8"x2 3/8"x28" (16x60x710) N4 - UPPER WALL SLAT - W103644 (2) 5/8"x2 3/8"x11 3/4" (16x60x298) N5 - DOOR STOP - W4L05036 (1) 5/8"x2 3/8"x4" (16x60x102) N86 - SUNBURST SPOKE - W103696 (4) 5/8"x2 3/8"x7 3/4" (16x60x198) N87 - VERTICAL SUNBURST SPOKE - W103695 (2) 5/8"x2 3/8"x12 3/4" (16x60x324) O1 - WALL SPACER - W103684 (1) 5/8"x1 3/8"x37 3/8" (16x34x950) SB74 - SWING BEAM EXTENDED - W4L04857 (1) 2"
Parts Identification Hardware (39) Z - LAG SCREW WH 5/16x2 - H100027 (17) CM - BOLT WH 5/16x1/2 - H100115 (4) AA - LAG SCREW WH 5/16x2 1/2 - H100028 (4) G - BOLT WH 5/16x1 1/4 - H100009 (44) H - BOLT WH 5/16x1 1/2 - H100010 (10) J - BOLT WH 5/16x1 3/4 - H100011 (11) K - BOLT WH 5/16x2 - H100012 (6) BZ - SWING HANGER QUICK LINK - H100099 (2) F - BOLT WH 5/16x1 - H100008 (4) AJ - BOLT HEX 5/16x1 1/4 - H100042 (4) AN - BOLT HEX 5/16x2-3/4 - H100047 (12) B - NUT BARREL WH 5/16x5/8 - H100004 (52) D -
Parts Identification Hardware (2) - T-40 TORX BIT - A100042 (4) BX - WASHER SPLIT 5/16 - H100095 (41) BG - T-NUT 5/16 - H100074 (2) - T-30 TORX BIT - H100147 (7) CE - WASHER FLAT 9x18 - H100106 (4) BE - T-NUT 1/4 - H100072 (11) CJ - NUT LOCK 5/16 - H100110 (60) AD - WASHER LOCK EXT 12x19 - H100031 (4) LC - LAG SCREW WH 1/4x1-1/2 - H100145 (4) KV - WASHER LOCK EXT 6x15 - H100138 (13) CH - SCREW TAPPING 14x1-1/2 - H100109 (7) CG - WASHER LOCK INT 8x15 - H100108 (205) BR - SCREW PFH 8x1 1/8 - H100088
Parts Identification Accessories (NOT TO SCALE) (4) EA - HAND GRIP YELLOW PLASTIC - A100043 (6) FA - QUICK LINK - A100069 (1) - SWING BEAM EXT.
(1) H74 - LEFT UPRIGHT - W100608 1"x3 3/8"x50 3/4" (24x86x1290) (4) H50 - LADDER RUNG - W4L05474 1"x3 3/8"x17 1/8" (24x86x434) 4 FT LADDER WITH ATTACHMENT BOARD STEP 1 (8) SCREW PFH 8x2 (8 PLCS) H74 H50 SCREW PFH 8x2
(1) H75 - RIGHT UPRIGHT - W100609 1"x3 3/8"x50 3/4" (24x86x1290) STEP 2 (8) SCREW PFH 8x2 (8 PLCS) H75 SCREW PFH 8x2
(1) M103 - REAR SUPPORT - W102996 5/8"x3 3/8"x18 1/4" (16x86x462) STEP 3 (4) SCREW PFH 8x1 1/2 (4 PLCS) M103 SCREW PFH 8x1 1/2
TOP 1 7/16" (1) M102 - ATTACHMENT BOARD - W102970 5/8"x3 3/8"x18 1/4" (16x86x462) STEP 4 (4) SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (4 PLCS) TOP M102
(2) E71 - MONKEY BAR RAIL - W102369 1 3/8"x3 3/8"x60 5/8" (36x86x1539) (4) GW - L BRACKET 54x67 - A100158 (2) SB - TRIANGLE PLATE 100 5 HOLE - A100309 MONKEY BAR ASSEMBLY STEP 1 (2) (2) BOLT WH 5/16x2 (6) BOLT WH 5/16x1 1/2 (6) T-NUT 5/16 NUT LOCK 5/16 BUILD (1) LEFT AND (1) RIGHT TOP RAIL. (2) WASHER FLAT 8x27 E71 GW BOLT WH 5/16x2 (1 PLC) E71 SB RIGHT SIDE VIEW OF TRINANGLE PLATE WASHER FLAT 8x27 (1 PLC) NUT LOCK 5/16 (1 PLC) BE SURE TO PLACE FLAT SIDE OF PLATE AGAINST SIDE OF BOARD.
(2) E78 - MONKEY BAR UPRIGHT - W102370 1 3/8"x3 3/8"x74 3/4" (36x86x1900) MONKEY BAR ASSEMBLY STEP 2 (4) BUILD (1) LEFT AND (1) RIGHT TOP RAIL.
(6) - METAL RUNG 559 - A4M00585 MONKEY BAR ASSEMBLY STEP 3 METAL RUNG 559 (6 PLCS) (12) SCREW TAPPING 14x1-1/2 (12 PLCS) E71 E71 E78 E78 SCREW TAPPING 14x1-1/2
(2) H82 - MONKEY BAR GROUND BOARD - W100994 1"x3 3/8"x70 3/8" (24x86x1786) BOLT WH 5/16x1 3/4 (6) BOLT HEX 5/16x2-3/4 (4) (4) STEP 4 (2) MONKEY BAR ASSEMBLY LAG SCREW WH 5/16x2 (1) H81 - MONKEY BAR BRACE - W100993 1"x3 3/8"x53 1/4" (24x86x1352) T-NUT 5/16 (2) (2) WASHER LOCK INT 8x15 WASHER FLAT 9x18 (8) WASHER LOCK EXT 8x19 WASHER FLAT 9x18 (2 PLCS) WASHER LOCK INT 8x15 (2 PLCS) BOLT HEX 5/16x2-3/4 (2 PLCS) T-NUT 5/16 (2 PLCS) H81 WASHER LOCK EXT 8x19 (4 PLCS) H81 BOLT WH 5/16x1 3/4
(2) EA - HAND GRIP YELLOW PLASTIC - A100043 MONKEY BAR ASSEMBLY STEP 5 LAG SCREW (4)WH 1/4x1-1/2 (4) WASHER LOCK EXT 6x15 LAG SCREW WH 1/4x1-1/2 (4 PLCS) EA EA WASHER LOCK EXT 6x15 (4 PLCS) E78 E78
(2) L BRACKET 66x66x127 BLUE - A100153 - SWING BEAM EXT BRACKET (1) BLUE - RIGHT - A4M00512 - SWING BEAM EXT. BRACKET (1) BLUE - LEFT - A4M00511 (1) SB74 - SWING BEAM EXTENDED - W4L04857 2"x5 1/4"x89 1/2" (50x134x2274) 4' EXTENDED SWING BEAM STEP 1 (2) BOLT HEX 5/16x2-3/4 NUT LOCK 5/16 (2 PLCS) BOLT HEX 5/16x2-3/4 (2 PLCS) (3) (3) BOLT WH 5/16x1 3/4 NUT BARREL WH 5/16x7/8 WASHER FLAT 8x27 (4 PLCS) (2) NOTE: HAND-TIGHTEN ONLY! SECURED IN STEP 3.
(1) W71 - SWING BEAM SUPPORT - W4L04856 2"x3 3/8"x49 5/8" (50x86x1260) (2) (1) H79 - END SUPPORT - W4L04855 1"x3 1/2"x42" (24x86x1072) E77 - ANGLE BRACE - W4L04854 1 3/8"x3 3/8"x74 3/8" (36x86x1890) 4' EXTENDED SWING BEAM STEP 2 (3) WASHER NUT BARREL (3) LOCK EXT WH 5/16x7/8 12x19 (2) BOLT WH 5/16x2 WASHER (5) LOCK EXT 8x19 W71 LAG SCREW (2) WH 5/16x2 1/2 WASHER LOCK EXT 12x19 (1 PLC) NUT BARREL WH 5/16x7/8 (1 PLC) WASHER LOCK EXT 8x19 (1 PLC) BOLT WH 5/16x4 1/2 (1 PLC) NUT BARREL WH 5/16x7/8
4' EXTENDED SWING BEAM STEP 3 (2) (2) BOLT WH 5/16x2 1/2 NUT BARREL WH 5/16x7/8 WASHER (2) LOCK EXT 12x19 WASHER (2) LOCK EXT 8x19 (2) BOLT WH 5/16x1 3/4 NUT BARREL (2) WH 5/16x1 1/2 NUT BARREL WH 5/16x7/8 (2 PLCS) BOLT WH 5/16x1 3/4 (2 PLCS) NUT BARREL WH 5/16x1 1/2 (2 PLCS) WASHER LOCK EXT 12x19 (2 PLCS) BOLT WH 5/16x2 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) NOTE: SECURE ALL BOLTS!
4' EXTENDED SWING BEAM (6) NUT LOCK 5/16 (6) WASHER FLAT 8x27 STEP 4 SB74 (6) (6) WASHER SAFETY 17x30 SWING HANGER QUICK LINK WASHER SAFETY 17x30 (6 PLCS) WASHER FLAT 8x27 (6 PLCS) NUT LOCK 5/16 (6 PLCS) 1. Lock nut must be tightened until loop is tight against the safety washer. 2. Swing hanger bolt must be oriented as shown to avoid damage to swing hanger bolt.
(1) M77 - SLIDE BRACE - W100544 (1) EM - SLIDE BED 8' YELLOW - A100056 SLIDE ASSEMBLY STEP 1 TOP (3) BOLT WH 5/16x1/2 (3) T-NUT 5/16 SLIDE BED 8' YELLOW (1 PLC) BOTTOM T-NUT 5/16 (3 PLC) M77 BOLT WH 5/16x1/2 (3 PLC) USE 'M77' SLIDE BRACE AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. BE SURE TO PLACE SLIDE BRACE UP 1/4" FROM BOTTOM EDGE OF SLIDE BED BEFORE MARKING HOLE PATTERN. TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
(1) (1) HA - SLIDE RAIL 8' BLUE LEFT - A100162 (2) GZ - SLIDE RAIL 8' BLUE RIGHT - A100161 M78 - CENTER SLIDE BRACE - W100545 SLIDE ASSEMBLY STEP 2 SLIDE RAIL 8' BLUE RIGHT (24) M78 CENTER SLIDE BRACE SLIDE RAIL 8' BLUE LEFT SCREW PFH 8x2 1/2 (24 PLCS) TIP: A HELPER IS REQUIRED FOR THIS PHASE. SCREW PFH 8x2 1/2 NOTE: MAKE CERTAIN SUPPORTS AND SLIDE BED ARE FULLY ENGAGED WITHIN CHANNEL OF SLIDE RAILS.
L3 - MONKEY BAR ARCH BOARD - W103625 E1 - UPRIGHT - W103616 (1) 5/8"x4 3/8"x38 5/8" (16x112x982) (1) 1 3/8"x3 3/8"x89 1/2" (36x86x2274) E3 - UPRIGHT - W103618 (1) 1 3/8"x3 3/8"x89 1/2" (36x86x2274) K4 - CABIN WINDOW ARCH BOARD - W103627 (1) 5/8"x5 1/4"x38" (16x134x966) M7 - UNIVERSAL WALL RAIL - W103630 (2) 5/8"x3 3/8"x37 3/8" (16x86x950) H2 - SIDE FLOOR RAIL - W103622 (1) 1"x3 3/8"x38 5/8" (24x86x982) K6 - SIDE GROUND BOARD - W103620 (1) 5/8"x5 1/4"x38 5/8" (16x134x982) STEP 1 WASHER LOCK EXT 8
E2 - UPRIGHT - W103617 G1 - SWING BEAM MOUNT BOARD - W103631 (1) 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) 1"x5 1/4"x37 3/8" (24x134x950) (1) E4 - UPRIGHT ASSEMBLY - W2A01783 H1 - SIDE FLOOR RAIL - W103685 (1) 1"x3 3/8"x38 5/8" (24x86x982) 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) K1 - GROUND BOARD - W103686 5/8"x5 1/4"x60 3/4" (16x134x1542) (1) SQ - "A" REVISION TAG - A100314 O1 - WALL SPACER - W103684 (1) 5/8"x1 3/8"x37 3/8" (16x34x950) M7 - UNIVERSAL WALL RAIL - W103630 (1) 5/8"x3 3/8"x37 3/8" (1
K5 - UNIVERSAL GROUND BOARD - W103621 (2) 5/8"x5 1/4"x38 5/8" (16x134x982) STEP 3 (8) (8) E1 E2 E3 E4 K1 K5 K5 K5 K6 LAG SCREW WH 5/16x2 (8 PLCS) WASHER LOCK EXT 8x19 (8 PLCS) LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19
L2 - UNIVERSAL ARCH BOARD - W103628 K8 - DOOR ARCH BOARD - W4L05812 (1) 5/8"x4 3/8"x38 5/8" (16x112x982) (1) 5/8"x5 1/4"x38 5/8" (16x134x982) M6 - FRONT FLOOR RAIL - W103623 (1) 5/8"x3 3/8"x38 5/8" (16x86x982) STEP 4 E4 (10) LAG SCREW WH 5/16x2 (10) WASHER LOCK EXT 8x19 LAG SCREW WH 5/16x2 (10 PLCS) E3 L2 E1 WASHER LOCK EXT 8x19 (10 PLCS) M6 K8 E2 K1 K5 K6 K5
L2 - UNIVERSAL ARCH BOARD - W103628 (1) 5/8"x4 3/8"x38 5/8" (16x112x982) M5 - LADDER FLOOR RAIL - W103624 (1) 5/8"x3 3/8"x38 5/8" (16x86x982) STEP 5 E1 (6) (6) LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19 LAG SCREW WH 5/16x2 (6 PLCS) L2 WASHER LOCK EXT 8x19 (6 PLCS) M5 E2 E4 K5 K1 E3 K6 K5
M7 - UNIVERSAL WALL RAIL - W103630 M12 - ANGLE BRACE - W103687 (1) 5/8"x3 3/8"x37 3/8" (16x86x950) (2) 5/8"x3 3/8"x22 5/8" (16x86x576) STEP 6 BOLT WH 5/16x2 1/4 15 13 14 12 13 11 12 10 11 10 8 4 9 8 6 7 5 6 5 4 2 3 ! (4) WASHER LOCK EXT 8x19 BOLT WH 5/16x1 (2) 2 1 3 7 9 (2) 22 21 20 19 17 18 15 16 13 14 12 11 10 9 8 7 6 5 4 3 2 1 1 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 (4) E4 WASHER LOCK EXT 12x19 (2) (2
F71 - STANDARD ANGLE BRACE - W100689 (2) 1 3/8"x2 3/8"x13" (36x60x330) STEP 7 LAG SCREW WH 5/16x2 1/2 (2) NUT BARREL WH 5/16x7/8 (2 PLCS) BOLT WH 5/16x2 (2) WASHER LOCK EXT 12x19 (2 PLCS) (2) WASHER LOCK EXT 12x19 (4) H1 (2) BOLT WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19 NUT BARREL WH 5/16x7/8 E2 F71 H1 F71 F71 LAG SCREW WH 5/16x2 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) E4 M5 E2 E3
H7 - FLOOR SUPPORT BLOCK - W103632 (4) 1"x3 3/8"x3 3/8" (24x86x86) STEP 8 M5 E3 (8) SCREW PFH 8x2 H7 E3 SCREW PFH 8x2 (8 PLCS) E4 E1 E2
H3 - FLOOR SUPPORT - W103689 (1) 1"x3 3/8"x37 3/8" (24x86x950) STEP 9 (4) E4 E3 H3 E2 H3 M6 M6 K4 E1 SCREW PFH 8x2 (4 PLCS) SCREW PFH 8x2
M2 - FLOOR BOARD - W103634 (1) 5/8"x3 3/8"x40 1/2" (16x86x1030) (2) FP1 - FLOOR PANEL - W103697 1 1/4"x17 5/8"x40 1/2" (32x448x1030) STEP 10 SCREW PFH 8x1 1/2 (55 PLCS) (55) FP1 FP1 M2 FP1 M2 SCREW PFH 8x1 1/2 FP1
M3 - ARCHED WALL SLAT - W103636 M14 - WALL SLAT - W103635 (2) 5/8"x3 3/8"x39 3/8" (16x86x1000) (7) 5/8"x3 3/8"x17 5/8" (16x86x448) STEP 11 M3 M3 'M14' FLUSH TO 'M7' M14 M14 (36) E3 M7 K6 SCREW PFH 8x1 1/8 (28 PLCS) M14 K6 SCREW PFH 8x1 1/8 (8 PLCS) SCREW PFH 8x1 1/8
TOP TOP K2 - WALL SLAT - W4L05808 K3 - WALL SLAT - W4L05809 (1) 5/8"x4 3/8"x39 3/8" (16x110x1000) (1) 5/8"x5 1/4"x39 3/8" (16x134x1000) Y1 - WALL SLAT - W4L05811 K7 - WALL SLAT - W4L05810 (1) 5/8"x4"x39 3/8" (16x102x1000) (1) 5/8"x5 1/4"x39 3/8" (16x134x1000) STEP 12 K8 TOP K7 K2 (16) SCREW PFH 8x1 1/8 Y1 K3 FRONT EXTERIOR VIEW K5 K3 K7 K2 Y1 K5 SCREW PFH 8x1 1/8 (16 PLCS) INTERIOR VIEW
N1 - WALL SLAT - W103688 (2) 5/8"x2 3/8"x32 3/8" (16x60x822) STEP 13 N1 (6) K5 N1 FRONT EXTERIOR VIEW SCREW PFH 8x1 1/8 (6 PLCS) K3 FRONT INTERIOR VIEW SCREW PFH 8x1 1/8
(1) DP1 - DOOR PANEL - W2A01780 1 1/4"x16"x21 7/8" (32x406x556) STEP 14 (9) 3/4" SCREW PFH 8x1 1/8 (9 PLCS) N1 K3 DP1 SCREW PFH 8x1 1/8
N5 - DOOR STOP - W4L05036 (1) 5/8"x2 3/8"x4" (16x60x102) (1) - KNOB KIT - A6P00028 STEP 15 NOTE: DOOR KNOB HARDWARE INCLUDED IN KIT.
M7 - UNIVERSAL WALL RAIL - W103630 (1) 5/8"x3 3/8"x37 3/8" (16x86x950) STEP 16 (2) (2) WASHER LOCK EXT 8x19 (2) (2) BOLT WH 5/16x1 1/2 NUT BARREL WH 5/16x7/8 WASHER LOCK EXT 12x19 NUT BARREL WH 5/16x7/8 (2 PLCS) E2 E4 WASHER LOCK EXT 12x19 (2 PLCS) M7 M7 WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x1 1/2 (2 PLCS)
M19 - SHORT WALL RAIL - W103640 (2) 5/8"x3 3/8"x8 1/4" (16x86x208) STEP 17 (2) LAG SCREW WH 5/16x2 (2) E2 M19 LAG SCREW WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) E2 M19 WASHER LOCK EXT 8x19
M18 - SHORT WALL RAIL - W103639 (2) 5/8"x3 3/8"x9 3/4" (16x86x248) STEP 18 (2) (2) WASHER LOCK EXT 12x19 (2) (2) BOLT WH 5/16x1 1/2 NUT BARREL WH 5/16x7/8 WASHER LOCK EXT 8x19 NUT BARREL WH 5/16x7/8 (2 PLCS) E1 WASHER LOCK EXT 12x19 (2 PLCS) M18 E1 M18 E3 WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x1 1/2 (2 PLCS)
M19 - SHORT WALL RAIL - W103640 (2) 5/8"x3 3/8"x8 1/4" (16x86x208) STEP 19 E3 E4 M19 (2) LAG SCREW WH 5/16x2 (2) WASHER LOCK EXT 8x19 LAG SCREW WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) E3 M19
M10 - ARCHED WALL SLAT - W103642 M11 - WALL SLAT - W103641 (2) 5/8"x3 3/8"x28 3/8" (16x86x720) STEP 20 M11 (2) 5/8"x3 3/8"x28 3/8" (16x86x720) L2 M10 (16) E2 SCREW PFH 8x1 1/8 SCREW PFH 8x1 1/8 (16 PLCS) M11 L2 E1 M11 M10 L2 M11 M11 M10 M10 EXTERIOR VIEW INTERIOR VIEW
N2 - WALL SLAT - W103643 M10 - ARCHED WALL SLAT - W103642 (2) 5/8"x3 3/8"x28 3/8" (16x86x720) (2) 5/8"x2 3/8"x28 3/8" (16x60x720) STEP 21 L3 N2 M10 N2 (16) SCREW PFH 8x1 1/8 M10 SCREW PFH 8x1 1/8 (16 PLCS) L3 L3 M10 M10 N2 N2 EXTERIOR VIEW INTERIOR VIEW
M17 - UPPER ARCHED WALL SLAT - W103645 (2) 5/8"x3 3/8"x11 3/4" (16x86x298) STEP 22 N4 N4 - UPPER WALL SLAT - W103644 (2) 5/8"x2 3/8"x11 3/4" (16x60x298) SCREW PFH 8x1 1/8 (16 PLCS) M7 E3 (16) M17 SCREW PFH 8x1 1/8 N4 M7 M17 L3 EXTERIOR VIEW INTERIOR VIEW
M9 - ARCHED WALL SLAT - W103680 M11 - WALL SLAT - W103641 (2) 5/8"x3 3/8"x28 3/8" (16x86x720) STEP 23 (2) 5/8"x3 3/8"x28 3/8" (16x86x720) M11 (16) SCREW PFH 8x1 1/8 (4) T-NUT 1/4 SCREW PFH 8x1 1/8 (16 PLCS) L2 M9 E4 M11 T-NUT 1/4 (4 PLCS) E4 M9 E3 L2 EXTERIOR VIEW INTERIOR VIEW
M13 - WALL SLAT - W103638 (5) 5/8"x3 3/8"x21 1/4" (16x86x540) STEP 24 M13 M13 L1 SCREW PFH 8x1 1/8 (20 PLCS) (20) M13 E2 E4 SCREW PFH 8x1 1/8
(2) EA - HAND GRIP YELLOW PLASTIC - A100043 STEP 25 (4) BOLT PTH 1/4x1 L2 (4) WASHER FLAT 9x18 (4) M9 M9 EA WASHER FLAT 9x18 (4 PLCS) WASHER LOCK INT 8x15 (4 PLCS) BOLT PTH 1/4x1 (4 PLCS) WASHER LOCK INT 8x15
M8 - ROOF RAFTER - W4L05813 (2) 5/8"x3 3/8"x33 7/8" (16x86x862) STEP 26 (2) LAG SCREW WH 5/16x2 (2) WASHER LOCK EXT 8x19 LAG SCREW WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) M8 M8 M7 M7 L2
TOP TOP M15 - UPPER ARCHED WALL SLAT - W103682 (2) 5/8"x3 3/8"x16 7/8" (16x86x430) M16 - UPPER WALL SLAT - W103681 (2) 5/8"x3 3/8"x16 7/8" (16x86x430) STEP 27 TOP M16 SCREW PFH 8x1 1/8 (12 PLCS) (12) SCREW PFH 8x1 1/8 M15 M16 M16 M8 M15 EXTERIOR VIEW INTERIOR VIEW
TOP N3 - HORIZONTAL SUNBURST BOARD - W103683 (1) 5/8"x2 3/8"x28" (16x60x710) (2) N87 - VERTICAL SUNBURST SPOKE - W103695 (1) 5/8"x2 3/8"x12 3/4" (16x60x324) N86 - SUNBURST SPOKE - W103696 5/8"x2 3/8"x7 3/4" (16x60x198) K80 - SUNBURST HALF MOON - W103694 (1) 5/8"x3 3/4"x10 3/8" (16x96x264) STEP 28 SCREW PFH 8x1 1/8 (13 PLCS) N86 N87 N86 (13) NOTE: 'N3' ORIENTATION.
N87 - VERTICAL SUNBURST SPOKE - W103695 (1) 5/8"x2 3/8"x12 3/4" (16x60x324) N3 - HORIZONTAL SUNBURST BOARD - W103683 (1) 5/8"x2 3/8"x28" (16x60x710) M8 - ROOF RAFTER - W4L05813 (2) 5/8"x3 3/8"x33 7/8" (16x86x862) K80 - SUNBURST HALF MOON - W103694 (1) 5/8"x3 3/4"x10 3/8" (16x96x264) M16 - UPPER WALL SLAT - W103681 M15 - UPPER ARCHED WALL SLAT - W103682 (2) 5/8"x3 3/8"x16 7/8" (16x86x430) (2) 5/8"x3 3/8"x16 7/8" (16x86x430) N86 - SUNBURST SPOKE - W103696 (2) 5/8"x2 3/8"x7 3/4" (16x60x198) STEP 29 R
(2) RP2 - ROOF PANEL - W2A01782 35"x392"x1057" (35x392x1057) STEP 30 REPEAT FOR OTHER SIDE. FIG. 1 (8) INTERIOR VIEW SCREW PFH 8x1 1/2 (4 PLCS) FIG.
(1) - 90° L-BRACKET - BLK - A4M00555 STEP 31 90° L-BRACKET - BLK (2) RP2 SCREW PWH 8x5/8 BLK (2 PLCS) RP2 SCREW PWH 8x5/8 BLK
(2) RP1 - ROOF PANEL - W2A01781 1 3/8"x19 3/8"x41 5/8" (35x491x1057) STEP 32 REPEAT FOR OTHER SIDE. FIG. 1 SCREW PFH 8x1 1/2 (4 PLCS) (8) RP2 RP1 RP1 RP2 FIG.
LADDER ASSEMBLY STEP 33 (2) BOLT WH 5/16x1 1/4 (2) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 BOLT WH 5/16x1 1/4 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) T-NUT 5/16 (2 PLCS) LADDER ASSEMBLY
MONKEY BAR ASSEMBLY STEP 34 (4) BOLT WH 5/16x1/2 MONKEY BAR ASSEMBLY BOLT WH 5/16x1/2 (4 PLCS)
SWING BEAM ASSEMBLY STEP 35 (4) (4) (4) BOLT HEX 5/16x1 1/4 (4 PLCS) WASHER SPLIT 5/16 (4 PLCS) WASHER FLAT 8x27 (4 PLCS) SWING BEAM ASSEMBLY BOLT HEX 5/16x1 1/4 WASHER SPLIT 5/16 WASHER FLAT 8x27
(2) - CHAIN BLUE 31" - A4M00525 (1) - TRAPEZE - A6P00034 (4) - CHAIN BLUE 51.25" - A4M00524 (6) FA - QUICK LINK - A100069 (2) HD - SWING SEAT YELLOW - A100171 STEP 36 TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK TRAPEZE CHAIN BLUE 31" (2 PLCS) CHAIN BLUE 51.
SLIDE ASSEMBLY STEP 37 12 5/8" BOLT WH 5/16x1/2 (3 PLCS) (3) BOLT WH 5/16x1/2 (3) WASHER LOCK EXT 12x19 (3) NUT BARREL WH 5/16x5/8 6 1/4" 2 5/8" 1 1/2" 7/16" Ø DRILLING PATTERN WASHER LOCK EXT 12x19 (3 PLCS) NUT BARREL WH 5/16x5/8 (3 PLCS) SLIDE ASSEMBLY
(8) - GROUND STAKE REBAR - A4M00527 Anchoring Instructions STEP 38 BOLT WH 5/16x1 1/4 (2) TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE LOCATIONS SHOWN. USING GROUND STAKES AS A GUIDE, DRILL 7/16" DIA HOLES.
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
