TIMBERLAKE PLAYHOUSE MODEL #: 65314 WARNING Adult Assembly Required. Not suitable for children under two years, due to sharp points and small parts. • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Manufacturer: Backyard Discovery 3001 North Rouse Pittsburg, KS 66762 1-800-856-4445 Register your new play house on-line @ www.swingsetsonline.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto.
Owner’s Manual Play House Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 2 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play House Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Play house 1. The Play house is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play house tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play House The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth Wood Chips Double-Shredded bark mulch Engineered Wood Fibers Fine Sand Coarse Sand Fine Gravel Medium Gravel 6" (152mm) 7' (2.13m) 6' (1.83m) 6' (1.83m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 9" (228mm) 10' (3.05m) 10' (3.05m) 7' (2.13m) 5' (1.52m) 5' (1.
Owner’s Manual Play House • • • • • • all moving parts including swing seats, ropes, cables, and chains for wear, Check rust, or deterioration. Replace as needed. Check metal parts for rust. If found, sand and repaint using non Lead-based paint meeting the requirements of Title 16 CRF Part 1303. Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment. Check all wood members for deterioration and splinters.
Owner’s Manual Play House Disposal Instructions: When the Play house use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit is discarded.
Owner’s Manual Play House APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information:. www.cpsc.gov/cpscpub/pubs/323.html X3. CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS11 X3.
Owner’s Manual Play House 11 This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1800-638-2772.
Play House Assembly Manual FAQs: 1. Does the area for the play house need to be level? Yes. Backyard Discovery recommends the play house be positioned on a flat level area for maximum safety and durability. Any stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the play house? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the play house for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
SAFETY AND ASSEMBLY INFORMATION SELECTING THE CORRECT LOCATION FOR YOUR PLAY PRODUCT IS IMPORTANT FOR YOUR CHILDREN’S SAFETY AND THE PRODUCT’S LONGEVITY Dimensions: • The Timberlake has one layout option. Layout Ground Dimension 3'-6" x 3'-10 11/16" x 56" Tall Safe Play Area* 15'-6" x 15'-10 3/4" *Level Ground Surface - See below General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs.
Parts Identification Wood Components (NOT TO SCALE) J1 - COUNTER TOP SUPPORT - W4L04753 (1) 1"x2 3/8"x5 7/8" (24x60x150) K1 - TRIANGLE SUNBURST - W4L04871 (2) 5/8"x5 1/4"x10 3/8" (16x134x265) L1 - GABLE BOARD - W4L04755 (4) 5/8"x4 3/8"x25 3/8" (16x112x643) M1 - COUNTER TOP - W4L04754 (2) 5/8"x3 3/8"x23 5/8" (16x86x600) N1 - SIDE WINDOW SHELF - W4L04751 (2) 5/8"x2 3/8"x18 7/8" (16x60x479) N2 - REAR WINDOW SHELF - W4L04760 (1) 5/8"x2 3/8"x19 1/8" (16x60x485) N3 - DOOR STOP - W4L04761 (1) 5/8"x2
Parts Identification Wood Components (NOT TO SCALE) (1) DP1 - DOOR ASSEMBLY - W2A01511 (1) WP7 - UPPER REAR CENTER WALL - W2A01522 (1) WP2 - RIGHT FRONT CORNER PANEL - W2A01525 (1) WP1 - LEFT FRONT CORNER PANEL - W2A01524 (2) WP6 - UPPER CENTER WALL - W2A01510 (2) WP5 - LOWER CENTER WALL - W2A01509 (1) WP8 - LOWER REAR CENTER WALL - W2A01523 (1) WP4 - RIGHT REAR CORNER PANEL - W2A01527 (1) WP3 - LEFT REAR CORNER PANEL - W2A01526
Parts Identification Wood Components (NOT TO SCALE) (2) WP9 - HEADER ASSEMBLY - W2A01539 (2) RP1 - LOWER ROOF PANEL - W2A01513 (2) RP2 - UPPER ROOF PANEL - W2A01514
Parts Identification Hardware (2) SCREW PFH 8x1/2 - H100124 (4) NUT BARREL WH 1/4x7/8 - H100140 (41) SCREW PFH 8x1 - H100085 (33) SCREW PFH 8x1 1/8 - H100088 (51) SCREW PFH 8x1 1/4 - H100087 (4) BOLT WH 1/4x1 - H100137 (24) SCREW PFH 8x1 1/2 - H100086 (1) SCREW PFH 8x2 - H100111 (4) WASHER LOCK EXT 8x15 - H100139 (4) SCREW PFH 8x2 1/2 - H100090 (2) SCREW PWH 8x7/16 - H100361 (4) WASHER LOCK EXT 6x15 - H100138 (4) SCREW PWH 8x5/8 - H100128 (9) SCREW PWH 8x3/4 - H100070 (2) T-30 TORX BIT - H100147
Parts Identification Accessories (NOT TO SCALE) (1) PHONE KIT - A100132 (2) FLOWER POT HOLDER - A6P00023 (1) KNOB KIT - A6P00020 (1) "A" REVISION TAG - A100314 (1) FAUCET KIT - A6P00024 (1) BYD ID TAG (MEDIUM) AGES 2 TO 10 - A4M00528 (1) STOVE KIT - A6P00025 (1) SURFACE MOUNT BASIN - A6P00032 (1) METAL TIE STRAP - A4M00517
Playhouse Assembly STEP 1: STAND THE (4) CORNER WALL ASSEMBLIES AS SHOWN BELOW. WP4 WP4 WP3 REAR WP2 NOTE THE PROFILE OF THE WALL BOARDS. THE TONGUE FACES TOWARD THE TOP OF THE PANELS.
(1) WP6 - UPPER CENTER WALL - W2A01510 (1) WP5 - LOWER CENTER WALL - W2A01509 STEP 2: (10) LEFT REAR WP6 FRONT WP5 RIGHT SCREW PFH 8x1 (10 PLCS) SCREW PFH 8x1
(1) WP7 - UPPER REAR CENTER WALL - W2A01522 (1) WP8 - LOWER REAR CENTER WALL - W2A01523 STEP 3: (10) REAR LEFT WP7 WP8 FRONT RIGHT SCREW PFH 8x1 (10 PLCS) SCREW PFH 8x1
(1) WP6 - UPPER CENTER WALL - W2A01510 (1) WP5 - LOWER CENTER WALL - W2A01509 STEP 4: (10) RIGHT REAR WP6 WP5 LEFT FRONT SCREW PFH 8x1 (10 PLCS) SCREW PFH 8x1
(1) DP1 - DOOR ASSEMBLY - W2A01511 STEP 5: FRONT RIGHT (6) DP1 LEFT REAR DP1 3/4" SCREW PFH 8x1 1/8 (6 PLCS) SCREW PFH 8x1 1/8
(1) METAL TIE STRAP - A4M00517 STEP 6: (8) FRONT RIGHT 3/8" TYP SCREW PWH 8x3/4 (8 PLCS) LEFT METAL TIE STRAP SCREW PWH 8x3/4
(2) WP9 - HEADER ASSEMBLY - W2A01512 STEP 7: SCREW PFH 8x2 1/2 (4 PLCS) WP9 WP9 (4) RIGHT REAR LEFT FRONT SCREW PFH 8x2 1/2
N4 - TIE STRAP - W102424 (8) 5/8”x2”x3 1/8” (16x50x80) STEP 8: SCREW PFH 8x1 1/4 (32 PLCS) N4 REAR N4 (32) N4 N4 N4 SCREW PFH 8x1 1/4 N4 N4 2" TYP LEFT RIGHT FRONT
L1 - GABLE BOARD - W4L04755 (4) 5/8"x4 3/8"x25 3/8" (16x112x643) STEP 9: (4) WASHER LOCK EXT 8x15 (4) WASHER LOCK EXT 6x15 (4) WASHER LOCK EXT 6x15 (4 PLCS) L1 BOLT WH 1/4x1 (4 PLCS) WASHER LOCK EXT 8x15 (4 PLCS) BOLT WH 1/4x1 (4) NUT BARREL WH 1/4x7/8 (4 PLCS) L1 L1 REAR LEFT RIGHT FRONT NUT BARREL WH 1/4x7/8
N5 - SUNBURST LEG - W4L04872 (2) 5/8"x2 3/8"x10 1/4" (16x60x260) K1 - TRIANGLE SUNBURST - W4L04871 (2) 5/8"x5 1/4"x10 3/8" (16x134x265) N6 - SUNBURST LEG - W4L04873 (4) 5/8"x2 3/8"x8 1/4" (16x60x210) STEP 10: N5 N6 N6 (20) (4) K1 SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/8 (8 PLCS) SCREW PFH 8x1 1/8 (6 PLCS) SCREW PFH 8x1 1/2 (4 PLCS) REAR LEFT RIGHT FRONT SCREW PFH 8x1 1/8
(2) RP2 - UPPER ROOF PANEL - W2A01514 STEP 11: FLUSH (8) SCREW PFH 8x1 1/2 RP2 RP2 SCREW PFH 8x1 1/2 (8 PLCS) RIGHT REAR LEFT FRONT
(2) RP1 - LOWER ROOF PANEL - W2A01513 STEP 12: (8) SCREW PFH 8x1 1/2 RP1 RP1 SCREW PFH 8x1 1/2 (8 PLCS) REAR LEFT RIGHT FRONT
N1 - SIDE WINDOW SHELF - W4L04751 (1) 5/8"x2 3/8"x18 7/8" (16x60x479) STEP 13: FLUSH (2) REAR SCREW PFH 8x1 1/4 (2 PLCS) N1 RIGHT LEFT FRONT SCREW PFH 8x1 1/4
N2 - REAR WINDOW SHELF - W4L04760 (1) 5/8"x2 3/8"x19 1/8" (16x60x485) STEP 14: FLUSH (2) SCREW PFH 8x1 1/4 FRONT SCREW PFH 8x1 1/4 (2 PLCS) RIGHT LEFT N2 REAR
N1 - SIDE WINDOW SHELF - W4L04751 (1) 5/8"x2 3/8"x18 7/8" (16x60x479) STEP 15: FLUSH (2) SCREW PFH 8x1 1/4 REAR FRONT RIGHT SCREW PFH 8x1 1/4 (2 PLCS) N1
Q1 - COUNTER TOP SUPPORT - W4L04752 (1) 1"x4 3/8"x5 7/8" (24x112x150) STEP 16: 5/8" (1) Q1 RIGHT SCREW PFH 8x2 (1 PLC) REAR SCREW PFH 8x2
J1 - COUNTER TOP SUPPORT - W4L04753 (1) 1"x2 3/8"x5 7/8" (24x60x150) STEP 17: J1 (2) SCREW PFH 8x1 1/4 13 3/4" FRONT SCREW PFH 8x1 1/4 (2 PLCS) 'J1' SUPPORT ATTACHES NEXT TO PLASTIC CORNER MATERIAL.
M1 - COUNTER TOP - W4L04754 (2) 5/8"x3 3/8"x23 5/8" (16x86x600) STEP 18: FLUSH M1 (4) SCREW PFH 8x1 1/4 SCREW PFH 8x1 1/4 (4 PLCS) LEFT FRONT
(1) "A" REVISION TAG - A100314 STEP 19: (2) LEFT SCREW PWH 8x5/8 REAR SCREW PWH 8x5/8 (2 PLCS) FRONT RIGHT "A" REVISION TAG
(1) FAUCET KIT - A6P00024 STEP 20: (2) REAR FRONT RIGHT SCREW PFH 8x1 1/2 (2 PLCS) 1" FAUCET KIT SCREW PFH 8x1 1/2
(1) SURFACE MOUNT BASIN - A6P00032 STEP 21: (2) SCREW PWH 8x5/8 REAR LEFT SCREW PWH 8x5/8 (2 PLCS) RIGHT FRONT 3/8" SURFACE MOUNT BASIN
(1) STOVE KIT - A6P00025 STEP 22: (4) LEFT SCREW PFH 8x1 1/8 REAR SCREW PFH 8x1 1/8 (4 PLCS) FRONT RIGHT STOVE KIT 1 1/8"
N3 - DOOR STOP - W4L04761 (1) 5/8"x2 3/8"x3 7/8" (16x60x100) STEP 23: (3) SCREW PFH 8x1 1/4 H 2 5/16" N3 SCREW PFH 8x1 1/4 (3 PLCS)
(1) KNOB KIT - A6P00020 STEP 24: RIGHT FRONT KNOB KIT LEFT REAR FACE PLATE SCREW PFH 8x3/4 (2 PLCS) LATCH SCREW PFH 8x1 (1 PLC)
(1) PHONE KIT - A100132 STEP 25: (2) REAR 24 5/8" LEFT RIGHT FRONT PHONE KIT SCREW PFH 8x1/2 (2 PLCS) SCREW PFH 8x1/2
(2) FLOWER POT HOLDER - A6P00023 STEP 26: (8) RIGHT SCREW PFH 8x1 FRONT FLOWER POT HOLDER (2 PLCS) REAR LEFT SCREW PFH 8x1 (8 PLCS)
(1) BYD ID TAG (MEDIUM) AGES 2 TO 10 - A4M00528 STEP 27: (2) REAR LEFT FRONT SCREW PWH 8x7/16 (2 PLCS) RIGHT SCREW PWH 8x7/16
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied. This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of consequential damages and therefore this limitation may not apply to you.
