Instructions / Assembly

q
TOP OF
BOARD
FIG. 1
FIG. 2
TOP OF
BOARD
q
STEP 11
MEASURE DOWN 15/16" FROM TOP OF E1 & E2 LEGS AND PILOT DRILL USING 1/8"
DRILL BIT APPROXIMATELY 2" DEEP FOR H3 AND M8 BOARD ATTACHMENT. SEE
FIGURE 1.
ATTACH GABLE END ASSEMBLY AND M17 WALL RAIL TO E1 & E2 TOWER LEGS USING
(2) 2-1/2" LAG SCREWS AND LOCK WASHERS.
STEP 12
MEASURE DOWN 15/16" FROM TOP OF E4 & E5 LEGS AND PILOT DRILL USING 1/8" DRILL
BIT APPROXIMATELY 2" DEEP FOR H3 AND M8 BOARD ATTACHMENT. SEE FIGURE 2.
ATTACH GABLE END ASSEMBLY AND M17 WALL RAIL TO E4 & E5 CLUB HOUSE TOWER
LEGS USING (2) 2-1/2" LAG SCREWS AND LOCK WASHERS.
M17
E2
E1
E5
E4
M17
GABLE END ASSEMBLY
GABLE END ASSEMBLY
REAR VIEW
FRONT VIEW
WASHER
LOCK EXT
8x19
(2)
WASHER
LOCK EXT
8x19
(2)
GABLE END ASSEMBLY
M17 - WALL RAIL - W102881
5/8"x3 3/8"x40" (16x86x1016)
(2)
LAG SCREW
WH 5/16x2-1/2
(2)
LAG SCREW
WH 5/16x2-1/2
(2)
15/16"
15/16"
E4 & E5
E1 & E2
M17 ATTACHMENT
SURFACE
M17 ATTACHMENT
SURFACE