OAKMONT Wooden Swing Set Model: #65114 • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Manufacturer: Backyard Discovery 3001 North Rouse Pittsburg, KS 66762 1-800-856-4445 Register your new swing set on-line @ www.swingsetsonline.com (you will also find any updates on assembly instructions and information to order replacement parts) Features the fastening system.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto.
Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) Wood Chips 7' (2.13m) 10' (3.05m) 11' (3.35m) 10' (3.05m) Double-Shredded bark mulch 6' (1.83m) 10' (3.05m) 11' (3.35m) 7' (2.13m) Engineered Wood Fibers 6' (1.83m) 7' (2.13m) >12' (3.66m) 6' (1.83m) Fine Sand 5' (1.52m) 5' (1.
Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21.
Owner’s Manual Play Set Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment.
Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY 9 HANDBOOK X3.
Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the playset? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use. A maximum of 120 lbs. per child is recommended for play activities designed for multiple child use.
Parts Identification Wood Components (NOT TO SCALE) (1) E1 - FRONT LEFT UPRIGHT - W4L04782 1 3/8"x3 3/8"x81 3/4" (36x86x2076) (1) E2 - FRONT RIGHT UPRIGHT - W4L04807 1 3/8"x3 3/8"x81 3/4" (36x86x2076) (1) E3 - BACK LEFT UPRIGHT - W4L04783 1 3/8"x3 3/8"x81 3/4" (36x86x2076) (1) E4 - BACK RIGHT UPRIGHT - W2A01499 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E77 - ANGLE BRACE - W4L04854 1 3/8"x3 3/8"x74 3/8" (36x86x1890) (2) (3) F71 - STANDARD ANGLE BRACE - W100689 1 3/8"x2 3/8"x13" (36x60x330) H1 - LEFT RO
Parts Identification Wood Components (NOT TO SCALE) H10 - FLOOR SUPPORT - W4L04812 1"x3 3/8"x40 1/8" (24x86x1018) (1) (1) H11 - ROOF UPRIGHT - W4L04813 1"x3 3/8"x55 1/4" (24x86x1404) (1) H74 - LEFT UPRIGHT - W100608 1"x3 3/8"x50 3/4" (24x86x1290) H75 - RIGHT UPRIGHT - W100609 1"x3 3/8"x50 3/4" (24x86x1290) (1) H79 - END SUPPORT - W4L04855 1"x3 1/2"x42" (24x86x1072) (1) (1) J1 - DOOR STOP - W4L04809 1"x2 3/8"x2" (24x60x50) (1) K1 - GROUND BOARD - W4L04686 5/8"x5 1/4"x73 1/2" (16x134x1868) (2)
Parts Identification Wood Components (NOT TO SCALE) L2 - ARCHED ROOF BOARD - W4L04774 5/8"x4 3/8"x40" (16x112x1016) (1) (2) M1 - END ROOF RAIL - W4L04787 5/8"x3 3/8"x41 7/8" (16x86x1064) (1) M2 - FLOOR BOARD - W4L04688 5/8"x3 3/8"x41 7/8" (16x86x1064) M3 - WALL BOARD - W4L04768 5/8"x3 3/8"x41" (16x86x1040) (2) M4 - SERVING SHELF SUPPORT - W4L04695 5/8"x3 3/8"x40 1/8" (16x86x1018) (1) M5 - WALL BOARD - W4L04784 5/8"x3 3/8"x40 1/8" (16x86x1018) (2) M6 - FLOOR SUPPORT - W4L04691 5/8"x3 3/8"x40" (1
Parts Identification Wood Components (NOT TO SCALE) (9) M14 - PICKET - W4L04785 5/8"x3 3/8"x17 3/4" (16x86x452) (1) M15 - WALL RAIL - W4L04776 5/8"x3 3/8"x16 5/8" (16x86x422) (2) M16 - WINDOW WALL BOARD - W4L04780 5/8"x3 3/8"x14" (16x86x356) (4) M17 - WINDOW WALL BOARD - W4L04770 5/8"x3 3/8"x6 1/2" (16x86x164) (1) M18 - FLOOR SUPPORT - W4L04810 5/8"x3 3/8"x40" (16x86x1016) (2) M19 - WALL BOARD - W4L04814 5/8"x3 3/8"x40 1/8" (16x86x1018) (1) M77 - SLIDE BRACE - W4L04711 5/8"x3 3/8"x14 1/4" (16x
Parts Identification Wood Components (NOT TO SCALE) (2) Q1 - BENCH SEAT - W4L04767 1"x4 3/8"x40 1/8" (24x112x1018) (1) SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) (1) W71 - SWING BEAM SUPPORT - W4L04856 2"x3 3/8"x49 5/8" (50x86x1260) (2) (1) FP1 - FLOOR PANEL - W2A01497 1 1/4"x19 1/8"x41 7/8" (32x485x1064) DR1 - DOOR PANEL - W2A01498 1 1/2"x16 3/8"x36 3/8" (38x416x924)
Parts Identification Hardware (1) KA - BOLT WH 5/16x4 1/2 - H100021 (2) C - NUT BARREL WH 5/16x1 1/2 - H100006 (2) M - BOLT WH 5/16x2 1/2 - H100014 (11) D - NUT BARREL WH 5/16x7/8 - H100005 (54) BG - T-NUT 5/16 - H100074 (4) L - BOLT WH 5/16x2 1/4 - H100013 (2) BE - T-NUT 1/4 - H100072 (13) B - NUT BARREL WH 5/16x5/8 - H100004 (25) K - BOLT WH 5/16x2 - H100012 (2) AY - BOLT PTH 1/4x1 - H100061 (2) AN - BOLT HEX 5/16x2-3/4 - H100047 (14) J - BOLT WH 5/16x1 3/4 - H100011 (4) AJ - BOLT HEX 5/16x1 1/4 - H1
Parts Identification Hardware (41) BT - SCREW PFH 8x2 1/2 - H100090 (17) CK - SCREW PFH 8x2 - H100111 (9) CJ - NUT LOCK 5/16 - H100110 (6) BZ - SWING HANGER QUICK LINK - H100099 (85) BP - SCREW PFH 8x1 1/2 - H100086 (2) BQ - SCREW PFH 8x1 1/4 - H100087 (96) BR - SCREW PFH 8x1 1/8 - H100088 (2) CH - SCREW TAPPING 14x1-1/2 - H100109 (2) (9) BC - SCREW PWH 8x3/4 - H100070 - T-40 TORX WRENCH - A100041 (54) BN - SCREW PFH 8x1 - H100085 (19) CY - SCREW PWH 8x5/8 - H100128 (2) - T-40 TORX BIT - A1000
Parts Identification Accessories (NOT TO SCALE) (1 ) EK -S (1 ) LID E RA IL 8' GR EE N RI G HT -A EL - (6) FA - QUICK LINK - A100069 SL ID E RA IL 8' GR EE N 10 00 54 LE FT -A 10 00 55 (2) EA - HAND GRIP YELLOW PLASTIC - A100043 (2) KN - CHAIN GREEN 31" - A100177 (4) EZ - CHAIN GREEN 51.
Parts Identification Accessories (NOT TO SCALE) (2) (1) - WINDOW (FLAT PACK) - A6P00019 - SLIDE BED 8' YELLOW - A6P00033 (1) - TARP .4x1014x2195 - A6P00035 1/32"x39 7/8"x86 3/8" (.
(1) (4) H74 - LEFT UPRIGHT - W100608 1"x3 3/8"x50 3/4" (24x86x1290) M104 - LADDER RUNG - W102997 1"x3 3/8"x17 1/8" (24x86x434) LADDER ASSEMBLY STEP 1 (8) H74 SCREW PFH 8x2 (8 PLCS) M104 SCREW PFH 8x2
(1) H75 - RIGHT UPRIGHT - W100609 1"x3 3/8"x50 3/4" (24x86x1290) LADDER ASSEMBLY STEP 2 (8) H75 SCREW PFH 8x2 (8 PLCS) SCREW PFH 8x2
(1) LADDER ASSEMBLY STEP 3 M103 - REAR SUPPORT - W102996 5/8"x3 3/8"x18 1/4" (16x86x462) M103 SCREW PFH 8x1 1/2 (4 PLCS) (4) SCREW PFH 8x1 1/2
(1) M102 - ATTACHMENT BOARD - W4L04811 5/8"x3 3/8"x18 1/4" (16x86x462) LADDER ASSEMBLY STEP 4 M102 SCREW PFH 8x1 1/2 (4 PLCS) FLUSH (4) SCREW PFH 8x1 1/2
(1) - SL IDE B ED 8' Y E LLO W- A6P 00 (1) 033 M77 - SLIDE BRACE - W4L04711 5/8"x3 3/8"x14 1/4" (16x86x362) SLIDE ASSEMBLY STEP 1 (2) (2) BOLT WH 5/16x1/2 T-NUT 5/16 SLIDE BED 8' YELLOW (1 PLC) BOLT WH 5/16x1/2 (2 PLCS) M77 T-NUT 5/16 (2 PLCS) 1/4" USE 'M77' SLIDE BRACE AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. BE SURE TO PLACE SLIDE BRACE UP 1/4" FROM BOTTOM EDGE OF SLIDE BED BEFORE MARKING HOLE PATTERN. TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
(1) EL - SLIDE RAIL 8' GREEN LEFT - A100055 (2) M78 - CENTER SLIDE BRACE - W4L04712 5/8"x3 3/8"x14 1/4" (16x86x362) (1) EK - SLIDE RAIL 8' GREEN RIGHT - A100054 SLIDE ASSEMBLY STEP 2 NOTE: MAKE CERTAIN SUPPORTS AND SLIDE BED ARE FULLY ENGAGED WITHIN CHANNEL OF SLIDE RAILS. (24) M78 SLIDE RAIL 8' GREEN RIGHT (1 PLC) SCREW PFH 8x2 1/2 (24 PLCS) SLIDE RAIL 8' GREEN LEFT (1 PLC) TIP: A HELPER IS REQUIRED FOR THIS STEP.
(1) SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) (2) GD - L BRACKET 66x66x127 - A100140 (1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 (1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 SWING BEAM ASSEMBLY STEP 1 (2) BOLT HEX 5/16x2-3/4 (3) (3) (2) WASHER FLAT 8x27 (4 PLCS) NUT BARREL WH 5/16x7/8 NUT LOCK (4) 5/16 GD BOLT HEX 5/16x2-3/4 (2 PLCS) GD SB74 NUT LOCK 5/16 (2 PLCS) BOLT WH 5/16x1 3/4 (3 PLCS) NUT BARREL WH 5/16x7/8 (3 PLCS) TB TC BOLT WH 5/16x1 3/4
W71 - SWING BEAM SUPPORT - W4L04856 2"x3 3/8"x49 5/8" (50x86x1260) H79 - END SUPPORT - W4L04855 1"x3 1/2"x42" (24x86x1072) SWING BEAM ASSEMBLY STEP 2 WASHER LOCK EXT 8x19 (1) NUT BARREL WH 5/16x7/8 (1) WASHER LOCK EXT 12x19 (2) (5) (2) WASHER LOCK EXT 12x19 (1 PLC) NUT BARREL WH 5/16x7/8 (1 PLC) WASHER LOCK EXT 8x19 (1 PLC) WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x4 1/2 (1 PLC) BOLT WH 5/16x2 1/4 (2 PLCS) T-NUT 5/16 (2 PLCS) E77 H79 LAG SCREW WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS)
SWING BEAM ASSEMBLY STEP 3 (2) (2) NUT BARREL WH 5/16x7/8 (2) (2) WASHER LOCK EXT 8x19 (2) (2) BOLT WH 5/16x1 3/4 (2 PLCS) BOLT WH 5/16x2 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) NUT BARREL WH 5/16x7/8 (2 PLCS) NUT BARREL WH 5/16x1 1/2 (2 PLCS) WASHER LOCK EXT 12x19 (2 PLCS) BOLT WH 5/16x2 1/2 WASHER LOCK EXT 12x19 BOLT WH 5/16x1 3/4 NUT BARREL WH 5/16x1 1/2
(6) BZ - SWING HANGER QUICK LINK - H100099 SWING BEAM ASSEMBLY STEP 4 (6) NUT LOCK 5/16 (6) WASHER SAFETY 17x30 (6) WASHER FLAT 8x27 NUT LOCK 5/16 (6 PLCS) WASHER FLAT 8x27 (6 PLCS) WASHER SAFETY 17x30 (6 PLCS) 1. Lock nut must be tightened until loop is tight against the safety washer. 2. Swing hanger bolt must be oriented as shown to avoid damage to swing hanger bolt.
H1 - LEFT ROOF RAIL - W4L04806 1"x3 3/8"x60" (24x86x1524) (1) H10 - FLOOR SUPPORT - W4L04812 1"x3 3/8"x40 1/8" (24x86x1018) (1) (1) K3 - GROUND BOARD - W4L04699 5/8"x3 3/8"x48 5/8" (16x86x1234) K1 - GROUND BOARD - W4L04686 5/8"x5 1/4"x73 1/2" (16x134x1868) TOP (1) (2) E3 - BACK LEFT UPRIGHT - W4L04783 1 3/8"x3 3/8"x81 3/4" (36x86x2076) TOP (1) F71 - STANDARD ANGLE BRACE - W100689 1 3/8"x2 3/8"x13" (36x60x330) (1) E1 - FRONT LEFT UPRIGHT - W4L04782 1 3/8"x3 3/8"x81 3/4" (36x86x2076) 12 10 13
(2) M8 - BRACE - W4L04762 5/8"x3 3/8"x30" (16x86x762) STEP 2 (6) BOLT WH 5/16x1 (6) WASHER LOCK EXT 8x19 (6) (6) NUT BARREL WH 5/16x5/8 WASHER LOCK EXT 12x19 M8 BOLT WH 5/16x1 (6 PLCS) M8 WASHER LOCK EXT 8x19 (6 PLCS) WASHER LOCK EXT 12x19 (6 PLCS) NUT BARREL WH 5/16x5/8 (6 PLCS)
(1) (1) H5 - SWING BEAM RAIL - W4L04804 1"x3 3/8"x40 1/8" (24x86x1018) (1) O1 - SAFETY RAIL - W4L04805 5/8"x1 3/8"x40 1/8" (16x34x1018) M19 - WALL BOARD - W4L04814 5/8"x3 3/8"x40 1/8" (16x86x1018) STEP 3 H5 LAG SCREW WH 5/16x2 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 1/2 (2) LAG SCREW WH 5/16x2 (2) SCREW PFH 8x1 1/2 (4) SCREW PFH 8x1 1/2 (2 PLCS) LAG SCREW WH 5/16x2 (2 PLCS) (2) O1 M19 WASHER LOCK EXT 8x19
(1) (1) H4 - FLOOR SUPPORT - W4L04690 1"x3 3/8"x40 1/8" (24x86x1018) (1) M4 - SERVING SHELF SUPPORT - W4L04695 5/8"x3 3/8"x40 1/8" (16x86x1018) (1) (1) STEP 4 (1) H2 - RIGHT ROOF RAIL - W4L04786 1"x3 3/8"x60" (24x86x1524) K4 - GROUND BOARD - W4L04689 5/8"x5 1/4"x40 1/8" (16x134x1018) E2 - FRONT RIGHT UPRIGHT - W4L04807 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E4 - BACK RIGHT UPRIGHT - W2A01499 1 3/8"x3 3/8"x81 3/4" (36x86x2076) H2 LAG SCREW (10) WH 5/16x2 1/2 H4 (10) WASHER LOCK EXT 8x19 WARNING
(1) M5 - WALL BOARD - W4L04784 5/8"x3 3/8"x40 1/8" (16x86x1018) (1) M11 - SERVING HEADER - W4L04698 5/8"x3 3/8"x40 1/8" (16x86x1018) STEP 5 (4) M5 (4) LAG SCREW WH 5/16x2 (4 PLCS) M11 WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19
(2) (1) (1) K2 - GROUND BOARD - W4L04685 5/8"x5 1/4"x60 1/2" (16x134x1538) M6 - FLOOR SUPPORT - W4L04691 5/8"x3 3/8"x40" (16x86x1016) (1) L1 - ARCHED ROOF BOARD - W4L04775 5/8"x4 3/8"x40" (16x112x1016) M18 - FLOOR SUPPORT - W4L04810 5/8"x3 3/8"x40" (16x86x1016) (1) L2 - ARCHED ROOF BOARD - W4L04774 5/8"x4 3/8"x40" (16x112x1016) STEP 6 (20) BOLT WH 5/16x2 (20) WASHER LOCK EXT 8x19 L1 (20) T-NUT 5/16 L2 NOTE HOLE LOCATIONS M18 M6 T-NUT 5/16 (20 PLCS) WASHER LOCK EXT 8x19 (20 PLCS) BOLT WH 5
F71 - STANDARD ANGLE BRACE - W100689 1 3/8"x2 3/8"x13" (36x60x330) (1) (1) H3 - FLOOR JOIST - W4L04692 1"x3 3/8"x40 1/8" (24x86x1018) (1) SQ - "A" REVISION TAG - A100314 13 11 14 12 15 13 STEP 7 8 ! 8 6 7 5 6 4 5 3 4 SCREW PWH 8x5/8 2 3 1 2 9 7 10 11 9 12 10 (2) 22 21 20 19 17 18 16 15 14 13 11 12 9 10 8 7 6 5 4 3 2 1 1 (1) LAG SCREW WH 5/16x2 1/2 (4) SCREW PFH 8x2 1/2 23 BOLT WH 5/16x2 (1 PLC) BOLT WH 5/16x2 (1) (2) WASHER LOCK EXT 8x19 (1) T-NU
(1) (2) M2 - FLOOR BOARD - W4L04688 5/8"x3 3/8"x41 7/8" (16x86x1064) FP1 - FLOOR PANEL - W2A01497 1 1/4"x19 1/8"x41 7/8" (32x485x1064) STEP 8 (39) SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (39 PLCS) FP1 M2 FP1
(10) K93 - WALL BOARD - W4L04694 3/8"x3 3/8"x19 1/2" (11x86x495) (1) K92 - RIGHT WALL BOARD - W4L04697 3/8"x2 3/4"x37 1/2" (11x70x954) STEP 9 (45) 3 11/16 K92 K93 SCREW PFH 8x1 (45 PLCS) SCREW PFH 8x1
(1) K91 - LEFT WALL BOARD - W4L04696 3/8"x2 3/4"x37 1/2" (11x70x954) STEP 10 (5) K91 SCREW PFH 8x1 (5 PLCS) SCREW PFH 8x1
(1) K5 - SERVING SHELF - W4L04763 5/8"x5 1/4"x40 1/8" (16x134x1018) (2) H9 - SHELF SUPPORT - W4L04764 1"x3 3/8"x4 1/2" (24x86x114) STEP 11 (5) SCREW PFH 8x1 1/2 (2) SCREW PFH 8x2 1/2 SCREW PFH 8x2 1/2 (2 PLCS) SCREW PFH 8x1 1/2 (5 PLCS) K5 H9
(1) (2) N2 - WALL BOARD - W4L04771 5/8"x2 3/8"x41" (16x60x1040) (2) M12 - WINDOW WALL BOARD - W4L04769 5/8"x3 3/8"x25" (16x86x634) (2) M3 - WALL BOARD - W4L04768 5/8"x3 3/8"x41" (16x86x1040) M17 - WINDOW WALL BOARD - W4L04770 5/8"x3 3/8"x6 1/2" (16x86x164) STEP 12 (20) SCREW PFH 8x1 1/8 (20 PLCS) M17 M3 M12 N2 SCREW PFH 8x1 1/8
(2) N1 - HINGE BOARD - W4L04773 5/8"x2 3/8"x37 3/4" (16x60x958) STEP 13 (8) SCREW PFH 8x1 1/8 (8 PLCS) N1 SCREW PFH 8x1 1/8
(1) M13 - WALL RAIL - W4L04777 5/8"x3 3/8"x19 1/4" (16x86x490) (1) M15 - WALL RAIL - W4L04776 5/8"x3 3/8"x16 5/8" (16x86x422) STEP 14 (2) M13 M15 BOLT WH 5/16x2 (2) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 T-NUT 5/16 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x2 (2 PLCS)
(1) M5 - WALL BOARD - W4L04784 5/8"x3 3/8"x40 1/8" (16x86x1018) (1) M19 - WALL BOARD - W4L04814 5/8"x3 3/8"x40 1/8" (16x86x1018) STEP 15 M19 (4) LAG SCREW WH 5/16x2 (4) WASHER LOCK EXT 8x19 M5 WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 (4 PLCS)
(1) (2) N3 - WALL BOARD - W4L04779 5/8"x2 3/8"x30" (16x60x762) (2) M17 - WINDOW WALL BOARD - W4L04770 5/8"x3 3/8"x6 1/2" (16x86x164) (2) M10 - WALL BOARD - W4L04778 5/8"x3 3/8"x30" (16x86x762) M16 - WINDOW WALL BOARD - W4L04780 5/8"x3 3/8"x14" (16x86x356) STEP 16 N3 M17 M10 SCREW PFH 8x1 1/8 (20 PLCS) M16 (20) SCREW PFH 8x1 1/8
(9) M14 - PICKET - W4L04785 5/8"x3 3/8"x17 3/4" (16x86x452) STEP 17 SCREW PFH 8x1 1/8 (36 PLCS) M14 (36) M14 10 3/16 3 3/8 3 3/8 3 3/8 3 3/8 1 9/16 SCREW PFH 8x1 1/8
(1) M9 - HANDLE WALL BOARD - W4L04781 5/8"x3 3/8"x30" (16x86x762) (1) M10 - WALL BOARD - W4L04778 5/8"x3 3/8"x30" (16x86x762) STEP 18 M9 M10 SCREW PFH 8x1 1/8 (8 PLCS) (8) SCREW PFH 8x1 1/8 HOLES TOWARD BOTTOM 3 1/4 FLUSH 1 9/16
(2) M1 - END ROOF RAIL - W4L04787 5/8"x3 3/8"x41 7/8" (16x86x1064) STEP 19 SCREW PFH 8x2 1/2 (8 PLCS) M1 M1 (8) SCREW PFH 8x2 1/2
(1) M7 - TOP ROOF RAIL - W4L04803 5/8"x3 3/8"x40" (16x86x1016) (1) (1) H6 - ROOF UPRIGHT - W4L04788 1"x3 3/8"x24" (24x86x610) H11 - ROOF UPRIGHT - W4L04813 1"x3 3/8"x55 1/4" (24x86x1404) STEP 20 SCREW PFH 8x1 1/2 (4 PLCS) (4) BOLT WH 5/16x1 3/4 (4) BOLT WH 5/16x1 1/2 M7 H11 H6 (5) SCREW PFH 8x1 1/2 (1 PLC) SCREW PFH 8x1 1/2 (8) T-NUT 5/16 (8) WASHER LOCK EXT 8x19 BOLT WH 5/16x1 3/4 (4 PLCS) BOLT WH 5/16x1 1/2 (4 PLCS) WASHER LOCK EXT 8x19 (8 PLCS) T-NUT 5/16 (8 PLCS)
(1) - TARP .4x1014x2195 - A6P00035 1/32"x39 7/8"x86 3/8" (.4x1014x2195) STEP 21 TARP .
(2) H7 - BENCH UPRIGHT - W4L04765 1"x3 3/8"x15" (24x86x380) STEP 22 BOLT WH 5/16x1 (4) (4) H7 NUT BARREL WH 5/16x7/8 (4 PLCS) WASHER LOCK EXT 12x19 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) BOLT WH 5/16x1 (4 PLCS) NUT BARREL WH 5/16x7/8 (4) WASHER LOCK EXT 12x19 (4) WASHER LOCK EXT 8x19
(2) H8 - SEAT SUPPORT - W4L04766 1"x3 3/8"x8 1/2" (24x86x216) STEP 23 BOLT WH 5/16x1 3/4 (4) (4) T-NUT 5/16 (4) WASHER LOCK EXT 8x19 BOLT WH 5/16x1 3/4 (4 PLCS) H8 T-NUT 5/16 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) H8
(2) Q1 - BENCH SEAT - W4L04767 1"x4 3/8"x40 1/8" (24x112x1018) STEP 24 (8) SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (8 PLCS) Q1 Q1
(2) EA - HAND GRIP YELLOW PLASTIC - A100043 STEP 25 SCREW TAPPING 14x1-1/2 (2) T-NUT 1/4 (2 PLCS) BOLT PTH 1/4x1 (2) BOLT PTH 1/4x1 (2 PLCS) (4) WASHER LOCK INT 8x15 (4) WASHER FLAT 9x18 (2) T-NUT 1/4 WASHER FLAT 9x18 (4 PLCS) WASHER LOCK INT 8x15 (4 PLCS) SCREW TAPPING 14x1-1/2 (2 PLCS) HAND GRIP YELLOW PLASTIC (2 PLCS)
FOLD OUTWARD BOTH SIDES AT THIS LOCATION (2) (2) K94 - WINDOW CLEAT - W4L04906 3/8"x1 1/8"x9 7/8" (11x30x252) - WINDOW (FLAT PACK) - A6P00019 STEP 26 SCREW PWH 8x5/8 (8 PLCS) WINDOW (FLAT PACK) (2 PLCS) CENTER WINDOW IN OPENING SCREW PWH 8x3/4 (8 PLCS) 2 PLCS K94 TYPICAL WINDOW INSTALLATION (8) (8) SCREW PWH 8x5/8 SCREW PWH 8x3/4
(1) N5 - DOOR STOP SUPPORT - W4L04808 5/8"x2 3/8"x4 7/8" (16x60x125) (1) J1 - DOOR STOP - W4L04809 1"x2 3/8"x2" (24x60x50) STEP 27 (3) SCREW PFH 8x1 1/2 N5 J1 (2) SCREW PFH 8x1 1/4 SCREW PFH 8x1 1/4 (2 PLCS) SCREW PFH 8x1 1/2 (3 PLCS)
(1) DR1 - DOOR PANEL - W2A01498 1 1/2"x16 3/8"x36 3/8" (38x416x924) STEP 28 (11) CENTER DOOR IN TOP TO BOTTOM OPENING DR1 N1 FLUSH WITH FRONT SURFACE OF 'N1' BOARDS N1 SCREW PFH 8x1 1/2 (11 PLCS) SCREW PFH 8x1 1/2
(1) LATCHING KNOB WITH SCREWS - A6P00020 STEP 29 KNOB KIT (1 PLC) FACE PLATE (1 PLC) SCREW PFH 8x3/4 (2 PLCS) LATCH (1 PLC) SCREW PFH 8x1/2 (1 PLC)
LADDER ASSEMBLY FINAL ASSEMBLY STEP 1 (2) T-NUT 5/16 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x1 1/4 (2 PLCS) BOLT WH 5/16x1 1/4 (2) WASHER LOCK EXT 8x19 (2) T-NUT 5/16
SWING BEAM ASSEMBLY FINAL ASSEMBLY STEP 2 (4) BOLT HEX 5/16x1 1/4 BOLT HEX 5/16x1 1/4 (4 PLCS) T-NUT 5/16 (4 PLCS) WASHER FLAT 8x27 (4 PLCS) WASHER SPLIT 5/16 (4 PLCS) (4) WASHER FLAT 8x27 (4) WASHER SPLIT 5/16 (4) T-NUT 5/16
SLIDE ASSEMBLY FINAL ASSEMBLY STEP 3 DRILL (3) 7/16" DIA HOLES THROUGH SLIDE BED AND DECK AT LOCATIONS SHOWN.
(2) HD - SWING SEAT YELLOW - A100171 (4) FA - QUICK LINK - A100069 (4) EZ - CHAIN GREEN 51.25" - A100068 FINAL ASSEMBLY STEP 4 TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK CHAIN GREEN 51.
(1) - TRAPEZE - A6P00034 (2) FA - QUICK LINK - A100069 (2) KN - CHAIN GREEN 31" - A100177 FINAL ASSEMBLY STEP 5 TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK CHAIN GREEN 31" (2 PLCS) TRAPEZE (1 PLC) QUICK LINK (2 PLCS)
(6) - GROUND STAKE REBAR - A4M00527 FINAL ASSEMBLY STEP 6 (4) TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE LOCATIONS SHOWN. (6) (2) BOLT WH 5/16x1/2 NUT BARREL WH 5/16x5/8 BOLT WH 5/16x1 1/4 (6) WASHER LOCK EXT 12x19 DRILL 7/16" [10mm] HOLE AT EACH STAKE LOCATION.
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
