DAYTON Wooden Swing Set Model: # 65014 • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Manufacturer: Backyard Discovery 3001 North Rouse Pittsburg, KS 66762 1-800-856-4445 Register your new swing set on-line @ www.swingsetsonline.com (you will also find any updates on assembly instructions and information to order replacement parts) Features the fastening system.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto.
Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) Wood Chips 7' (2.13m) 10' (3.05m) 11' (3.35m) 10' (3.05m) Double-Shredded bark mulch 6' (1.83m) 10' (3.05m) 11' (3.35m) 7' (2.13m) Engineered Wood Fibers 6' (1.83m) 7' (2.13m) >12' (3.66m) 6' (1.83m) Fine Sand 5' (1.52m) 5' (1.
Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21.
Owner’s Manual Play Set Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment.
Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY 9 HANDBOOK X3.
Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the playset? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. Safe Play Zone 16'-4 5/8" [5.0] 2'- 1/2" [.6] 7'-3 5/16" [2.2] 6'-0" [1.8] 6'-0" [1.8] General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use.
Parts Identification Wood Components (NOT TO SCALE) E1 - UPRIGHT - W4L04790 - 1 3/8"x3 3/8"x83" (36x86x2108) (3) (1) E2 - UPRIGHT - W2A01538 - 1 3/8"x3 3/8"x83" (36x86x2108) E77 - ANGLE BRACE - W4L04854 - 1 3/8"x3 3/8"x74 3/8" (36x86x1890) (2) (1) H1 - FLOOR RAIL - W4L04796 - 1"x3 3/8"x48" (24x86x1220) (1) H2 - FLOOR RAIL - W4L04798 - 1"x3 3/8"x48" (24x86x1220) (1) H79 - END SUPPORT - W4L04855 - 1"x3 1/2"x42" (24x86x1072) (1) K1 - ROCKWALL BOARD - W4L04792 - 5/8"x5 1/4"x23 1/4" (16x134x590) (4
Parts Identification Wood Components (NOT TO SCALE) (1) M77 - SLIDE BRACE - W4L04711 - 5/8"x3 3/8"x14 1/4" (16x86x362) (2) M78 - CENTER SLIDE BRACE - W4L04712 - 5/8"x3 3/8"x14 1/4" (16x86x362) N1 - SAFETY RAIL - W4L04795 - 5/8"x2 3/8"x61 1/4" (16x60x1556) (1) N2 - MESH PANEL SUPPORT - W4L04870 - 5/8"x2 3/8"x21 7/8" (16x60x555) (2) N3 - TARP TOP SUPPORT - W4L04851 - 5/8"x2 3/8"x23 1/4" (16x60x591) (1) N4 - SAFETY RAIL - W4L04852 - 5/8"x2 3/8"x44 1/2" (16x60x1130) (1) N5 - SAFETY RAIL - W4L04853
Parts Identification Wood Components (NOT TO SCALE) (2) FP1 - FLOOR PANEL - W2A01532 1 1/4"x17"x19 7/8" (32x432x504) Parts Identification Hardware (23) CY - SCREW PWH 8x5/8 - H100128 - (87) BP - SCREW PFH 8x1 1/2 - H100086 - (13) BT - SCREW PFH 8x2 1/2 - H100090 - (26) (2) (9) CG - WASHER LOCK INT 8x15 - H100108 - (16) AD - WASHER LOCK EXT 12x19 - H100031 - (45) AC - WASHER LOCK EXT 8x19 - H100030 - BW - SCREW PFH 8x3 - H100092 - - T-40 TORX BIT - A100042 - (7) (2) - T-40 TORX WRENCH -
Parts Identification Hardware AY - BOLT PTH 1/4x1 - H100061 - (9) CM - BOLT WH 5/16x1/2 - H100115 - F - BOLT WH 5/16x1 - H100008 - (10) J - BOLT WH 5/16x1 3/4 - H100011 - (2) (9) Z - LAG SCREW WH 5/16x2 - H100027 - B - NUT BARREL WH 5/16x5/8 - H100004 - (6) (7) BZ - SWING HANGER QUICK LINK - H100099 - (9) (15) (4) K - BOLT WH 5/16x2 - H100012 (2) (2) D - NUT BARREL WH 5/16x7/8 - H100005 - C - NUT BARREL WH 5/16x1 1/2 - H100006 - M - BOLT WH 5/16x2 1/2 - H100014 - (7) (19) (11) (1)
Parts Identification Accessories (NOT TO SCALE) - MESH PANEL - BLUE (.4x448x1120) - A6P00044 1/32"x17 5/8"x44 1/8" (.4x448x1120) (1) (1) - TARP B-Y-B (.4x586x1766) - A6P00045 (.4x586x1766) (1) - TRAPEZE - A6P00034 - - LARGE BLUE HOLLOW CORE ROCK #1 A6P00041 - (2) ) (1 AM BE G IN 11 W 05 - S M0 A4 T EX .
(1) SB74 - SWING BEAM EXTENDED - W4L04857 2"x5 1/4"x89 1/2" (50x134x2274) - SWING BEAM EXT. BRACKET (1) BLUE - LEFT - A4M00511 - SWING BEAM EXT BRACKET (1) BLUE - RIGHT - A4M00512 4' EXTENDED SWING BEAM STEP 1 SB74 - SWING BEAM EXTENDED BOLT WH 5/16x1 3/4 (3 PLCS) NUT BARREL WH 5/16x7/8 (3 PLCS) SWING BEAM EXT BRACKET BLUE - RIGHT (1 PLC) SWING BEAM EXT.
(1) W71 - SWING BEAM SUPPORT - W4L04856 2"x3 3/8"x49 5/8" (50x86x1260) (2) (1) H79 - END SUPPORT - W4L04855 1"x3 1/2"x42" (24x86x1072) E77 - ANGLE BRACE - W4L04854 1 3/8"x3 3/8"x74 3/8" (36x86x1890) 4' EXTENDED SWING BEAM (3) STEP 2 WASHER NUT BARREL (3) LOCK EXT WH 5/16x7/8 12x19 (2) BOLT WH 5/16x2 WASHER (5) LOCK EXT 8x19 W71 (2) LAG SCREW WH 5/16x2 (1) WASHER LOCK EXT 12x19 (1 PLC) NUT BARREL WH 5/16x7/8 (1 PLC) WASHER LOCK EXT 8x19 (1 PLC) BOLT WH 5/16x4 1/2 (1 PLC) E77 H79 E77 WASHER L
4' EXTENDED SWING BEAM (2) STEP 3 (2) BOLT WH 5/16x2 1/2 NUT BARREL WH 5/16x7/8 WASHER (2) LOCK EXT 12x19 WASHER (2) LOCK EXT 8x19 (2) BOLT WH 5/16x1 3/4 NUT BARREL (2) WH 5/16x1 1/2 NUT BARREL WH 5/16x7/8 (2 PLCS) BOLT WH 5/16x1 3/4 (2 PLCS) NUT BARREL WH 5/16x1 1/2 (2 PLCS) WASHER LOCK EXT 12x19 (2 PLCS) BOLT WH 5/16x2 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS)
4' EXTENDED SWING BEAM (6) NUT LOCK 5/16 (6) WASHER FLAT 8x27 STEP 4 SB74 (6) (6) WASHER SAFETY 17x30 SWING HANGER QUICK LINK WASHER SAFETY 17x30 (6 PLCS) WASHER FLAT 8x27 (6 PLCS) NUT LOCK 5/16 (6 PLCS) 1. Lock nut must be tightened until loop is tight against the safety washer. 2. Swing hanger bolt must be oriented as shown to avoid damage to swing hanger bolt.
(1) - SL IDE BE D 8' YE L LOW - A6 P00 033 (1) M77 - SLIDE BRACE - W4L04711 5/8"x3 3/8"x14 1/4" (16x86x362) SLIDE ASSEMBLY STEP 1 (2) (2) BOLT WH 5/16x1/2 T-NUT 5/16 SLIDE BED 8' YELLOW (1 PLC) BOLT WH 5/16x1/2 (2 PLCS) T-NUT 5/16 (2 PLCS) M77 1/4" USE 'M77' SLIDE BRACE AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. BE SURE TO PLACE SLIDE BRACE UP 1/4" FROM BOTTOM EDGE OF SLIDE BED BEFORE MARKING HOLE PATTERN. TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
(1) GZ - SLIDE RAIL 8' BLUE RIGHT - A100161 (2) M78 - CENTER SLIDE BRACE - W4L04712 5/8"x3 3/8"x14 1/4" (16x86x362) (1) HA - SLIDE RAIL 8' BLUE LEFT - A100162 SLIDE ASSEMBLY STEP 2 NOTE: SLIDE RAIL 8' BLUE RIGHT (1 PLC) MAKE CERTAIN SUPPORTS AND SLIDE BED ARE FULLY ENGAGED WITHIN CHANNEL OF SLIDE RAILS. (24) M78 SLIDE RAIL 8' BLUE LEFT (1 PLC) SCREW PFH 8x3 (24 PLCS) TIP: A HELPER IS REQUIRED FOR THIS STEP.
(1) (1) M1 - GROUND BOARD - W4L04789 5/8"x3 3/8"x82" (16x86x2083) H1 - FLOOR RAIL - W4L04796 1"x3 3/8"x48" (24x86x1220) (1) (1) - UPRIGHT - W2A01538-1 1 3/8"x3 3/8"x83" (36x86x2108) E1 - UPRIGHT - W4L04790 1 3/8"x3 3/8"x83" (36x86x2108) STEP 1 • INSERT T-NUTS (FIG. 1 AND FIG. 2) E1 • ASSEMBLE AS SHOWN (FIG. 3) E2 T-NUT 5/16 (4 PLCS) (8) WASHER LOCK EXT 8x19 (8) T-NUT 5/16 ID PLATE FIG.
(1) (1) M1 - GROUND BOARD - W4L04789 5/8"x3 3/8"x82" (16x86x2083) H2 - FLOOR RAIL - W4L04798 1"x3 3/8"x48" (24x86x1220) (2) E1 - UPRIGHT - W4L04790 1 3/8"x3 3/8"x83" (36x86x2108) STEP 2 • INSERT T-NUTS (FIG. 1). • ASSEMBLE AS SHOWN (FIG. 2). (8) E1 WASHER LOCK EXT 8x19 E1 (8) T-NUT 5/16 FIG. 2 (4) BOLT WH 5/16x4-1/4 (4) BOLT WH 5/16x4 FIG.
(2) M3 - GROUND BOARD - W4L04794 5/8"x3 3/8"x23 1/4" (16x86x590) STEP 3 E1 E2 (8) SCREW PFH 8x1 1/2 (8 PLCS) M3 M3 M1 FLUSH TO THE GROUND SCREW PFH 8x1 1/2
(1) W1 - SB MOUNT BOARD - W4L04797 3 3/8"x2"x52" (86x50x1321) STEP 4 • INSERT T-NUTS (FIG. 1). • ASSEMBLE AS SHOWN (FIG. 2). WASHER LOCK EXT 8x19 (2) T-NUT 5/16 (2 PLCS) FIG. 1 (2) (2) BOLT WH 5/16x4-1/4 W1 E1 E1 WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x4-1/4 (2 PLCS) E2 H1 FIG.
(1) O1 - CENTER FLOOR BOARD - W4L04799 5/8"x2"x16 3/4" (16x50x425) L1 - END FLOOR BOARD - W4L04800 5/8"x4 3/8"x19 7/8" (16x112x504) (1) (1) FP1 - FLOOR PANEL - W2A01532 1 1/4"x17"x19 7/8" (32x432x504) STEP 5 E2 (16) E1 SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (16 PLCS) W1 FP1 L1 O1 W1 H1 L1 FP1 O1 H2 H1 • ATTACH 'O1' FLUSH TO 'W1' AS SHOWN • ATTACH 'FP1' THEN 'L1' AS SHOWN FLUSH H2
(1) L1 - END FLOOR BOARD - W4L04800 5/8"x4 3/8"x19 7/8" (16x112x504) (1) FP1 - FLOOR PANEL - W2A01532 1 1/4"x17"x19 7/8" (32x432x504) STEP 6 • ATTACH 'FP1' AS SHOWN • ATTACH 'L1' AS SHOWN W1 (14) FP1 SCREW PFH 8x1 1/2 (14 PLCS) L1 H1 H2 SCREW PFH 8x1 1/2
(3) P1 - RUNG - W4L04791 1 3/8"x1 3/8"x23 1/4" (36x36x590) STEP 7 W1 E1 E1 (12) 11 1/4" P1 11 1/4" 11 1/4" P1 SCREW PFH 8x2 1/2 (12 PLCS) SCREW PFH 8x2 1/2
(4) (2) K2 - ROCK BOARD - W4L04793 5/8"x5 1/4"x23 1/4" (16x134x590) - LARGE BLUE HOLLOW CORE ROCK #2 - A6P00040 (2) (1) K1 - ROCKWALL BOARD - W4L04792 5/8"x5 1/4"x23 1/4" (16x134x590) - LARGE BLUE HOLLOW CORE ROCK #1 - A6P00041 STEP 8 (20) • INSERT T-NUTS (FIG. 1). SCREW PFH 8x1 1/2 • ATTACH ROCKS AS SHOWN (FIG. 1). (8) • ATTACH ROCK LADDER BOARDS AS SHOWN (FIG 2).
(2) L2 - TARP RAIL - W4L04801 5/8"x4 3/8"x45" (16x112x1143) STEP 9 (10) WASHER LOCK EXT 8x19 (10) T-NUT 5/16 BOLT WH 5/16x4 (10 PLCS) (10) T-NUT 5/16 (10 PLCS) WASHER LOCK EXT 8x19 (10 PLCS) L2 L2 BOLT WH 5/16x4
(1) N3 - TARP TOP SUPPORT - W4L04851 5/8"x2 3/8"x23 1/4" (16x60x591) (2) (1) P2 - TARP UPRIGHT - W4L04850 1 3/8"x1 3/8"x20 1/4" (36x36x515) M4 - TARP END SUPPORT - W4L04802 5/8"x3 3/8"x24 1/2" (16x86x623) STEP 10 (11) SCREW PFH 8x1 1/2 P2 (2) (2) BOLT WH 5/16x2 WASHER LOCK EXT 8x19 T-NUT 5/16 (2 PLCS) (2) N3 SCREW PFH 8x1 1/2 (3 PLCS) P2 W1 M4 M4 SCREW PFH 8x1 1/2 (8 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x2 (2 PLCS) T-NUT 5/16
(1) - TARP B-Y-B (.4x586x1766) - A6P00045 STEP 11 • DRAPE TARP EVENLY OVER 'N3' TARP SUPPORT (FIG. 1). • CENTER TARP ON 'N3' TARP SUPPORT (FIG. 1). • ATTACH TARP USING (3) SCREW PWH 8x5/8 (FIG. 1). (9) SCREW PWH 8x5/8 • WRAP (1) END OF TARP AROUND OUTSIDE OF 'M4' AND 1 3/4" UP THE INSIDE (FIG. 2). • ATTACH TARP END USING (3) SCREW PWH 8x5/8 (FIG. 2). • REPEAT TO ATTACH OTHER END OF TARP (FIG. 2). SCREW PWH 8x5/8 (3 PLCS) FIG. 1 N3 M4 M4 1 3/4 SCREW PWH 8x5/8 (3 PLCS ON EACH END) FIG.
(1) N5 - SAFETY RAIL - W4L04853 5/8"x2 3/8"x31 1/2" (16x60x800) (1) (2) N2 - MESH PANEL SUPPORT - W4L04870 5/8"x2 3/8"x21 7/8" (16x60x555) N4 - SAFETY RAIL - W4L04852 5/8"x2 3/8"x44 1/2" (16x60x1130) (1) - MESH PANEL - BLUE (.4x448x1120) - A6P00044 1/32"x17 5/8"x44 1/8" (.
MESH PANEL AND SAFETY RAIL ASSEMBLY STEP 13 E1 • LOCATE 'N5' TO 'W1' 9 1/2" BELOW 'L2' (FIG. 1). • ATTACH AS SHOWN (FIG. 2) N5 W1 (10) MESH PANEL N4 FIG. 2 L2 9 1/2" SCREW PFH 8x1 1/2 (10 PLCS) FIG.
STEP 14 SCREW PWH 8x5/8 (4 PLCS) (10) N5 W1 N2 N2 N4 INSIDE VIEW MESH PANEL N5 OUTSIDE VIEW N4 SCREW PWH 8x5/8 (6 PLCS) SCREW PWH 8x5/8
(1) SQ - "A" REVISION TAG - A100314 STEP 15 • ATTACH TO 'H2' FLOOR RAIL INSIDE SURFACE (2) SCREW PWH 8x5/8 (2 PLCS) SQ H2 SCREW PWH 8x5/8
(1) N1 - SAFETY RAIL - W4L04795 5/8"x2 3/8"x61 1/4" (16x60x1556) STEP 16 (4) FLUSH E1 SCREW PFH 8x1 1/2 (4 PLCS) N1 E1 SCREW PFH 8x1 1/2
(1) SWING BEAM ASSEMBLY (2) STEP 17 - SB MOUNTING BRACKET - A4M00523 2x140x194 NUT BARREL WH 5/16x7/8 (4 PLCS) SB MOUNTING BRACKET (4) (4) BOLT WH 5/16x1 3/4 (4 PLCS) SB74 BOLT WH 5/16x1 3/4 NUT BARREL WH 5/16x7/8
(6) FA - QUICK LINK - A100069 (2) (1) - CHAIN BLUE 31" - A4M00525 (4) - TRAPEZE - A6P00034 (2) HD - SWING SEAT YELLOW - A100171 - CHAIN BLUE 51.25" - A4M00524 STEP 18 QUICK LINK (4 PLCS) TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK CHAIN BLUE 31" (2 PLCS) QUICK LINK (2 PLCS) CHAIN BLUE 51.
SLIDE ASSEMBLY STEP 19 • CENTER SLIDE ASSEMBLY ON 'O1' CENTER FLOOR BOARD (2) BOLT WH 5/16x1/2 (2) T-NUT 5/16 11 1/2" 4 1/4" BOLT WH 5/16x1/2 (2 PLCS) 1" DRILLING LOCATIONS T-NUT 5/16 (2 PLCS) DRILL 3/8" [10mm] HOLES AT SLIDE BOLT LOCATIONS
(6) - GROUND STAKE REBAR - A4M00527 - Anchoring Instructions (2) STEP 20 (4) TAP IN GROUND STAKES AT APPROXIMATELY 45° ANGLE IN THE LOCATIONS SHOWN. BOLT WH 5/16x1/2 (2) STAKE A (4) BOLT WH 5/16x1 NUT BARREL WH 5/16x7/8 NUT BARREL WH 5/16x5/8 (6) WASHER LOCK EXT 12x19 DRILL 3/8" [10mm] HOLE AT EACH STAKE LOCATION.
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
