SOMERSET Wooden Swing Set Model: #65012 • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Manufacturer: Backyard Discovery 3001 North Rouse Pittsburg, KS 66762 1-800-856-4445 Register your new swing set on-line @ www.swingsetsonline.com (you will also find any updates on assembly instructions and information to order replacement parts) Features the fastening system.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto.
Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth Wood Chips Double-Shredded bark mulch Engineered Wood Fibers Fine Sand Coarse Sand Fine Gravel Medium Gravel 6" (152mm) 7' (2.13m) 6' (1.83m) 6' (1.83m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 9" (228mm) 10' (3.05m) 10' (3.05m) 7' (2.13m) 5' (1.52m) 5' (1.52m) 7' (2.
Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21.
Owner’s Manual Play Set Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment.
Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK9 X3.
Owner’s Manual Play Set The American Society for Testing and Materials takes no position respecting the validity of any parent right asserted in connection with any item mentioned in this standard. Users of this standard are expressly advised that determination of the validity of any such parent rights, and the risk of infringement of such rights, are entirely their own responsibility.
www.swingsetsonline.com/support.aspx and follow the prompts to order them. Next, read the assembly manual and get the tools ready for the job as recommended in the manual. If the assembly manual is lost or misplaced a new one can be printed from Backyard Discovery’s website: www.swingsetsonline.com. 9. The playset seems to rock or sway too much. What’s wrong? Rocking is caused by uneven ground or obstructions such as rocks, roots, etc. under the ground rails.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 15'-3 7/8" [4.7] 10'-9 5/8" [3.3] 6' [1.8] Safe Play Zone General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use. A maximum of 120 lbs.
Parts Identification Wood Components (NOT TO SCALE) E1 - UPRIGHT - W101261 (1) 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E2 - UPRIGHT - W101260 (2) 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E3 - UPRIGHT - W101256 (1) 1 3/8"x3 3/8"x81 3/4" (36x86x2076) E77 - ANGLE BRACE - W100991 (2) 1 3/8"x3 3/8"x74 3/8" (36x86x1890) E82 - LEFT RAIL - W101127 (1) 1 3/8"x3 3/8"x48 3/4" (36x86x1239) E83 - RIGHT RAIL - W101128 (1) 1 3/8"x3 3/8"x48 3/4" (36x86x1239) F71 - STANDARD ANGLE BRACE - W100689 (6) 1 3/8"x2 3/8"x13" (36x60x33
Parts Identification Wood Components (NOT TO SCALE) H76 - LADDER RUNG - W100611 (4) 1"x3 3/8"x18 1/8" (24x86x460) H79 - END SUPPORT - W100992 (1) 1"x3 1/2"x42" (24x86x1072) H80 - GROUND BOARD - W100990 (1) 1"x3 3/8"x87 3/8" (24x86x2218) J1 - WINDOW LEDGE - W100709 (1) 1"x2 3/8"x29 1/2" (24x60x750) J2 - END FLOOR CLEAT - W100710 (4) 1"x2 3/8"x3 3/8" (24x60x86) J3 - FLOOR JOIST - W100984 (1) 1"x2 3/8"x60 1/8" (24x60x1528) K1 - ROOF SWING BEAM SUPPORT - W100682 (1) 5/8"x5 1/4"x51 5/8" (16x134x1310
Parts Identification Wood Components (NOT TO SCALE) K9-3 - WALL BOARD - W101257 (2) 3/8"x3 3/8"x42" (11x86x1068) K9-4 - WALL BOARD - W101239 (2) 3/8"x3 3/8"x37 3/8" (11x86x950) K9-5 - WALL BOARD - W101259 (6) 3/8"x3 3/8"x21 3/8" (11x86x544) L2 - GROUND BOARD - W100684 (2) 5/8"x4 3/8"x60 1/8" (16x112x1528) L3 - GROUND BOARD - W101602 (1) 5/8"x4 3/8"x46 7/8" (16x112x1191) L5 - GROUND BOARD - W100686 (1) 5/8"x4 3/8"x30" (16x112x762) L6 - ARCHED RAIL - W100694 (1) 5/8"x4 3/8"x60 1/8" (16x112x1528)
Parts Identification Wood Components (NOT TO SCALE) M5 - FACE BOARD - W101599 (2) 5/8"x3 3/8"x43 1/8" (16x86x1094) M6 - LOWER FACE BOARD - W101598 (2) 5/8"x3 3/8"x38 5/8" (16x86x982) M7 - WALL BOARD - W100708 (1) 5/8"x3 3/8"x35 1/4" (16x86x895) M8 - WALL RAIL - W100700 (1) 5/8"x3 3/8"x35 7/8" (16x86x910) M9 - ANGLE BRACE - W100696 (1) 5/8"x3 3/8"x35 5/8" (16x86x904) M10 - SAFETY BOARD - W100701 (1) 5/8"x3 3/8"x33 7/8" (16x86x860) M11 - UPPER FACE BOARD - W102866 (2) 5/8"x3 3/8"x26 5/8" (16x86x6
Parts Identification Wood Components (NOT TO SCALE) M77 - SLIDE BRACE - W100544 (1) 5/8"x3 3/8"x17 1/4" (16x86x438) M78 - CENTER SLIDE BRACE - W100545 (2) 5/8"x3 3/8"x17 1/4" (16x86x438) M81 - ROCK WALL BOARD - W101130 (8) 5/8"x3 3/8"x22 3/8" (16x86x568) M82 - ROCK WALL BOARD - W4L05551 (3) 5/8"x3 3/8"x22 3/8" (16x86x568) M83 - ROCK WALL BOARD - W4L05552 (3) 5/8"x3 3/8"x22 3/8" (16x86x568) N72 - ROCK WALL END BOARD - W101129 (1) 5/8"x2 3/8"x23 5/8" (16x60x600) SB74 - SWING BEAM EXTENDED - W102419
Parts Identification Hardware (11) AA - LAG SCREW WH 5/16x2 1/2 - H100028 (7) AY - BOLT PTH 1/4x1 - H100061 (32) Z - LAG SCREW WH 5/16x2 - H100027 (26) BE - T-NUT 1/4 - H100072 (20) BG - T-NUT 5/16 - H100074 (11) CM - BOLT WH 5/16x1/2 - H100115 (48) AD - WASHER LOCK EXT 12x19 - H100031 (8) F - BOLT WH 5/16x1 - H100008 (92) AC - WASHER LOCK EXT 8x19 - H100030 (3) G - BOLT WH 5/16x1 1/4 - H100009 (37) D - NUT BARREL WH 5/16x7/8 - H100005 (25) H - BOLT WH 5/16x1 1/2 - H100010 (13) B - NUT BARREL WH 5/16x
Parts Identification Hardware (28) CG - WASHER LOCK INT 8x15 - H100108 (13) CT - SCREW TAPPING 8x1/2 - H100123 (15) CE - WASHER FLAT 9x18 - H100106 (2) CH - SCREW TAPPING 14x1-1/2 - H100109 (2) - T-40 TORX WRENCH - A100041 (60) BN - SCREW PFH 8x1 - H100085 (50) BR - SCREW PFH 8x1 1/8 - H100088 (4) BX - WASHER SPLIT 5/16 - H100095 (24) BQ - SCREW PFH 8x1 1/4 - H100087 (180) BP - SCREW PFH 8x1 1/2 - H100086 (28) BS - SCREW PFH 8x1 3/4 - H100089 (2) - T-40 TORX BIT - A100042 (39) CK - SCREW PFH 8x2 -
Parts Identification Hardware (19) AZ - BOLT PTH 1/4x1 1/4 - H100062 (2) - T-30 TORX BIT - H100147 (2) KT - BOLT WH 1/4x1 - H100137 (2) C - NUT BARREL WH 5/16x1 1/2 - H100006 (7) KW - WASHER LOCK EXT 8x15 - H100139 (7) KS - NUT BARREL WH 1/4x5/8 - H100136 (2) - T-30 TORX WRENCH - H100114 (4) KY - BOLT WH 1/4x1/2" - H100141
Parts Identification Accessories (NOT TO SCALE) (1) EK - SLIDE RAIL 8' GREEN RIGHT - A100054 (1) - TRAPEZE - A6P00034 (1) EL - SLIDE RAIL 8' GREEN LEFT - A100055 (1) EM - SLIDE BED 8' YELLOW - A100056 FA - QUICK LINK (6) -A100069 HC - BYD ID TAG (LARGE) 2011 WITH (1) AGES -A100164 (2) FB - SWING SEAT YELLOW - A100070 - L BRACKET 54x67 (2) EJ -A100053 (4) EA - HAND GRIP YELLOW PLASTIC -A100043 - L BRACKET 66x66x127 (2) GD -A100140 (6) KC - METAL GROUND STAKE BROWN - A100178 (2) KN - CHAIN GREE
Parts Identification Accessories (NOT TO SCALE) (1) - GREEN HC ROCK #1 - A6P00036 (1) - GREEN HC ROCK #2 - A6P00037 (2) - RED HC ROCK #1 - A6P00038 (1) - RED HC ROCK #2 - A6P00039 (1) - BLUE HC ROCK #2 - A6P00040 (1) - BLUE HC ROCK #1 - A6P00041 (1) - YELLOW HC ROCK #1 - A6P00042 (1) - YELLOW HC ROCK #2 - A6P00043 (1) SS - "C" REVISION TAG - A100316 (1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 (1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325
(1) SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) (2) GD - L BRACKET 66x66x127 - A100140 (1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 (1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 4 FT GREEN EXTENDED SWING BEAM WITH TRAPEZE STEP 1 GD ATTACH (2) GD BRACKETS TO SB74 SWING BEAM USING 2-3/4" BOLT, FLAT WASHERS AND 5/16" LOCK NUT, AS SHOWN. ATTACH TB AND TC SWING BEAM EXTENSION BRACKETS TO SB74 SWING BEAM USING 13/4" BOLTS AND 7/8" BARREL NUTS, AS SHOWN.
(1) W71 - SWING BEAM SUPPORT - W102420 2"x3 3/8"x49 5/8" (50x86x1260) (1) (2) E77 - ANGLE BRACE - W100991 1 3/8"x3 3/8"x74 3/8" (36x86x1890) H80 - GROUND BOARD - W100990 1"x3 3/8"x87 3/8" (24x86x2218) (1) H79 - END SUPPORT - W100992 1"x3 1/2"x42" (24x86x1072) STEP 2 ATTACH H80 GROUND BOARD TO (2) E77 ANGLED SUPPORT BOARDS USING 2" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS, AS SHOWN.
STEP 3 INSERT W71 BOARD INTO TB AND TC BRACKET OPENING AND SECURE USING 1-3/4" BOLTS AND 7/8" BARREL NUTS, AS SHOWN. (2) BOLT WH 5/16x1-3/4 (2) BOLT WH 5/16x2-1/2 INSERT 2-1/2" BOLTS, LOCK WASHERS AND 1-1/2" BARREL NUTS INTO THE EDGE OF W71 BOARD, AS SHOWN.
STEP 4 INSERT (6) SWING HANGER QUICK LINK INTO SB74 SWING BEAM USING SAFETY WASHERS, FLAT WASHERS AND 5/16" LOCK NUTS, AS SHOWN.
(1) M77 - SLIDE BRACE - W100544 5/8"x3 3/8"x17 1/4" (16x86x438) (1) EM - SLIDE BED 8' YELLOW - A100056 SLIDE ASSEMBLY STEP 1 (3) T-NUT 5/16 (3) BOLT WH 5/16x1/2 SLIDE BED 8' YELLOW (1 PLC) BOLT WH 5/16x1/2 (3 PLCS) T-NUT 5/16 (3 PLCS) M77 USE 'M77' SLIDE BRACE AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. BE SURE TO PLACE SLIDE BRACE UP 1/4" FROM BOTTOM EDGE OF SLIDE BED BEFORE MARKING HOLE PATTERN. TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
(1) EL - SLIDE RAIL 8' GREEN LEFT - A100055 (1) EK - SLIDE RAIL 8' GREEN RIGHT - A100054 (2) M78 - CENTER SLIDE BRACE - W100545 5/8"x3 3/8"x17 1/4" (16x86x438) SLIDE ASSEMBLY STEP 2 EK (24) M78 EL NOTE: MAKE CERTAIN SUPPORTS AND SLIDE BED ARE FULLY ENGAGED WITHIN CHANNEL OF SLIDE RAILS. SCREW PFH 8x2 1/2 (24 PLCS) TIP: A HELPER IS REQUIRED FOR THIS STEP.
E82 - LEFT RAIL - W101127 1 3/8"x3 3/8"x48 3/4" (36x86x1239) (1) (8) M82 - ROCK WALL BOARD - W4L05551 5/8"x3 3/8"x22 3/8" (16x86x568) (3) (1) E83 - RIGHT RAIL - W101128 1 3/8"x3 3/8"x48 3/4" (36x86x1239) (3) M83 - ROCK WALL BOARD - W101132 5/8"x3 3/8"x22 3/8" (16x86x568) M83 - ROCK WALL BOARD - W4L05552 5/8"x3 3/8"x22 3/8" (16x86x568) 4 FT ROCK WALL ASSEMBLY STEP 1 ASSEMBLE SLATS TO RAILS AS SHOWN. NOTE THE ORIENTATION OF THE SLATS AND ARRANGE AS SHOWN. ATTACH TOP BOARD FIRST.
(1) N72 - ROCK WALL END BOARD - W101129 5/8"x2 3/8"x23 5/8" (16x60x600) 4 FT ROCK WALL ASSEMBLY STEP 2 USING N72 ROCK WALL ENDBOARD AS A TEMPLATE, PILOT DRILL USING 1/8" DRILL BIT AND ATTACH N72 TO TOP OF E82 AND E83 UPRIGHT RAILS USING (2) 1-1/2" WOOD SCREWS, AS SHOWN. FAILURE TO PILOT DRILL MAY RESULT IN BOARD SPLITTING.
(1) - GREEN HC ROCK #1 - A6P00036 (1) - RED HC ROCK #2 - A6P00039 (1) - YELLOW HC ROCK #1 - A6P00042 (1) - BLUE HC ROCK #1 - A6P00041 (1) - GREEN HC ROCK #2 - A6P00037 (2) - RED HC ROCK #1 - A6P00038 (1) - YELLOW HC ROCK #2 - A6P00043 (1) - BLUE HC ROCK #2 - A6P00040 4 FT ROCK WALL ASSEMBLY STEP 3 FLIP ROCK WALL ASSEMBLY OVER ON IT'S FRONT SURFACE AND INSTALL (18) 1/4" T-NUTS WITH A HAMMER.
4 Ft Ladder Phase 1 & 2 Phase Notes • Assemble with hardware as shown. • Center rungs in rail grooves.
4 Ft Ladder Phase 3 Phase Notes • Assemble with hardware as shown.
M13 - FLOOR RAIL - W102867 5/8"x3 3/8"x60 1/8" (16x86x1528) (1) E1 - UPRIGHT - W101261 1 3/8"x3 3/8"x81 3/4" (36x86x2076) (1) K4 - FLOOR RAIL - W103700 5/8"x5 1/4"x60 1/8" (16x134x1528) (2) E2 - UPRIGHT - W101260 1 3/8"x3 3/8"x81 3/4" (36x86x2076) (1) L2 - GROUND BOARD - W100684 (1) M7 - WALL BOARD - W100708 5/8"x3 3/8"x35 1/4" (16x86x895) 5/8"x4 3/8"x60 1/8" (16x112x1528) (1) E3 - UPRIGHT - W101256 1 3/8"x3 3/8"x81 3/4" (36x86x2076) (1) L7 - ARCHED SCULPTURED RAIL - W100695 5/8"x4 3/8"x60 1/8" (1
(1) K1 - ROOF SWING BEAM SUPPORT - W100682 5/8"x5 1/4"x51 5/8" (16x134x1310) (1) K5 - FLOOR RAIL - W103705 5/8"x5 1/4"x30" (16x134x762) (1) (2) M9 - ANGLE BRACE - W100696 5/8"x3 3/8"x35 5/8" (16x86x904) (1) M10 - SAFETY BOARD - W100701 5/8"x3 3/8"x33 7/8" (16x86x860) M5 - FACE BOARD - W101599 5/8"x3 3/8"x43 1/8" (16x86x1094) (1) L3 - GROUND BOARD - W101602 5/8"x4 3/8"x46 7/8" (16x112x1191) STEP 3 USING A HAMMER, INSTALL (4) 5/16" T-NUTS INTO THE HOLES PROVIDED ON THE INSIDE OF K1 ROOF SWING BEAM
(1) (1) L5 - GROUND BOARD - W100686 5/8"x4 3/8"x30" (16x112x762) (2) M6 - LOWER FACE BOARD - W101598 5/8"x3 3/8"x38 5/8" (16x86x982) M14 - FLOOR SUPPORT BOARD - W102864 5/8"x3 3/8"x30" (16x86x762) (2) M11 - UPPER FACE BOARD - W102866 5/8"x3 3/8"x26 5/8" (16x86x676) K2 - ROOF SUPPORT - W100683 5/8"x5 1/4"x51 5/8" (16x134x1310) M12 - ROCK WALL ARCH BOARD - W102862 5/8"x3 3/8"x30" (16x86x762) (1) (1) STEP 4 ATTACH L5 GROUND BOARD TO THE EDGES OF BOTH E1 AND E3 FORT UPRIGHTS USING (4) 2" LAG SCREWS
(2) M3 - TARP SUPPORT - W100692 5/8"x3 3/8"x60 1/8" (16x86x1528) J3 - FLOOR JOIST - W100984 (1) 1"x2 3/8"x60 1/8" (24x60x1528) (2) SP1 - FLOOR SUPPORT CLEAT - W100711 1"x1"x53 3/8" (24x24x1356) F71 - STANDARD ANGLE BRACE - W100689 (6) 1 3/8"x2 3/8"x13" (36x60x330) J2 - END FLOOR CLEAT - W100710 1"x2 3/8"x3 3/8" (24x60x86) (4) STEP 5 ATTACH (2) M3 TARP SUPPORT TO K1 AND K2 SUPPORTS USING (8) 2" WOOD SCREWS, AS SHOWN.
M1 - TENT SUPPORT - W101601 5/8"x3 3/8"x59 1/4" (16x86x1504) (1) M16 - TARP SUPPORT - W101237 5/8"x3 3/8"x29 1/8" (16x86x740) M4 - TARP TOP SUPPORT - W100693 5/8"x3 3/8"x60 1/8" (16x86x1528) (2) L9 - END FLOOR BOARD - W102863 5/8"x4 3/8"x29 7/8" (16x112x760) (1) (3) FP1- FLOOR PANEL - W102861 (1) STEP 6 ATTACH (1) L9 END FLOOR BOARD TO (2) J2 END FLOOR CLEATS AND J3 FLOOR JOIST USING (5) 1-1/2" WOOD SCREWS, AS SHOWN.
(1) J1 - WINDOW LEDGE - W100709 1"x2 3/8"x29 1/2" (24x60x750) (6) (4) K9-1 - WALL BOARD - W100713 3/8"x3 3/8"x15 3/4" (11x86x400) K9-2 - WALL BOARD - W100712 3/8"x3 3/8"x30 1/4" (11x86x768) STEP 7 WORKING YOUR WAY LEFT TO RIGHT, ATTACH (2) K9-2 WALL BOARDS TO K4 FLOOR RAIL AND L7 SCULPTURED RAIL USING (8) 1" WOOD SCREWS, AS SHOWN. ATTACH (6) K9-1 WALL BOARDS TO K4 FLOOR RAIL USING (12) 1" WOOD SCREWS IN THE BOTTOM SET OF HOLES, AS SHOWN.
(2) WP1 - WALL PANEL - W102865 STEP 8 CENTER AND ATTACH (2) WP1 WALL PANELS TO K1 SUPPORT AND K5 FLOOR RAIL USING (28) 1-1/8" WOOD SCREWS, AS SHOWN. (28) ASSEMBLER MAY HAVE TO LOOSEN OR REMOVE BOLTS AND BARRELS TO INSTALL WP1 PANELS.
(4) M17 - PICKET - W100705 5/8"x3 3/8"x27 1/8" (16x86x690) STEP 9 ATTACH (4) M17 PICKETS TO M8 WALL RAIL AND L6 ARCHED RAIL USING (16) 1-1/8" WOOD SCREWS, AS SHOWN.
(1) H1 - SERVING SHELF SUPPORT - W101604 1"x3 3/8"x30 3/4" (24x86x780) (1) K3 - SERVING BOARD - W101605 5/8"x5 1/4"x28 3/4" (16x134x729) (2) K9-4 - WALL BOARD - W101239 3/8"x3 3/8"x37 3/8" (11x86x950) (2) (1) L8 - SCULPTURED RAIL - W101240 5/8"x4 3/8"x35 1/2" (16x112x902) (2) K9-3 - WALL BOARD - W101257 3/8"x3 3/8"x42" (11x86x1068) (6) H3 - SERVING BOARD SUPPORT - W101606 1"x3 3/8"x3 3/8" (24x86x86) K9-5 - WALL BOARD - W101259 3/8"x3 3/8"x21 3/8" (11x86x544) STEP 10 H1 ATTACH (2) H3 SERVING BO
(4) EA - HAND GRIP YELLOW PLASTIC - A100043 STEP 12 INSERT (2) 1/4" T-NUTS INTO INSIDE SURFACE OF M7 AND M11 WALL BOARD, AS SHOWN. NEXT, ATTACH EA HANDLE GRIP TO M7 WALL BOARD USING (2) 1" PTH BOLTS, LOCK WASHERS AND FLAT WASHERS, AS SHOWN. (6) BOLT PTH 1/4x1 USING HANDLE GRIP AS A TEMPLATE, PILOT DRILL USING A 1/8" DRILL BIT AND ATTACH THE SECOND EA HANDLE GRIP TO E2 UPRIGHT USING (2) 1-1/2" TAPPING SCREWS, LOCK WASHERS AND FLAT WASHERS, AS SHOWN.
(1) HY - TARP 1522x2119 - A100062 1/32"x59 7/8"x83 3/8" (.4x1522x2119) STEP 13 CENTER HY TARP OVER M4 TARP TOP SUPPORT AND ATTACH USING (4) 1/2" TAPPING SCREWS, AS SHOWN. NEXT, DRAPE HY TARP EVENLY OVER (2) M3 TARP SUPPORTS AND WRAP UNDERNEATH AND UP THE BACK SIDE OF M3 SUPPORT APPROXIMATELY 1-13/16" FROM THE TOP AND ATTACH USING (8) 1/2" TAPPING SCREWS, AS SHOWN.
(2) M2 - BENCH SEAT - W104044 5/8"x3 3/8"x27 3/8" (16x86x694) (2) H4 - BENCH SEAT SUPPORT - W104040 1"x3 3/8"x6 1/2" (24x86x166) (2) EJ - L BRACKET 54x67 - A100053 H5 - BENCH UPRIGHT - W104041 (2) 1"x3 3/8"x11 3/4" (24x86x300) H6 - BENCH GROUND BOARD - W104042 (2) 1"x3 3/8"x18 1/8" (24x86x460) STEP 14 EJ ATTACH (2) EJ BRACKETS TO H6 BENCH GROUND BOARDS USING (2) 1/2" BOLT, LOCK WASHERS AND 7/8" BARREL NUT, AS SHOWN.
(1) - BENCH ASSEMBLY STEP 15 USING BENCH ASSEMBLY BRACKETS AS A TEMPLATE, DRILL TWO 10MM THRU HOLES AND ATTACH EJ BRACKET TO L2 GROUND BOARD USING (2) 1/2" BOLTS, LOCK WASHERS AND 5/8" BARREL NUTS, AS SHOWN.
(1) - SLIDE ASSEMBLY STEP 16 CENTER THE WAVE SLIDE ASSEMBLY IN OPENING, AS SHOWN. (3) BOLT WH 5/16x1/2 (3) WASHER LOCK EXT 12x19 USING A 10MM DRILL BIT, DRILL THREE THROUGH HOLES INTO THE SLIDE BED AND DECK BOARDS, AS SHOWN BELOW. ATTACH THE SLIDE ASSEMBLY TO THE DECK USING (3) 1/2" BOLTS, LOCK WASHERS AND 5/8" BARREL NUTS, AS SHOWN.
(1) - ROCK WALL ASSEMBLY STEP 17 ATTACH THE ROCK WALL ASSEMBLY TO M14 FLOOR BOARD SUPPORT USING (2) 2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. CENTER ROCK WALL ON 'M14' BOARD AND PILOT DRILL 1/8" HOLES FOR ROCK WALL ATTACHMENT.
(1) - LADDER ASSEMBLY STEP 18 ATTACH THE LADDER ASSEMBLY TO M13 FLOOR RAIL SUPPORT USING (2) 2-1/2" LAG SCREWS AND LOCK WASHERS, AS SHOWN. CENTER LADDER ON 'M13' BOARD AND PILOT DRILL 1/8" HOLES FOR LADDER ATTACHMENT.
(1) - SWING BEAM ASSEMBLY STEP 19 ATTACH SWING BEAM ASSEMBLY TO K1 ROOF SWING BEAM SUPPORT USING (4) 1" BOLTS, SPLIT WASHERS AND FLAT WASHERS, AS SHOWN BELOW. (4) (4) ATTACH HC I.D. TAG TO SB74 SWING BEAM USING (4) 5/8" PFH SCREWS, AS SHOWN.
(4) EZ - CHAIN GREEN 51.25" - A100068 (2) FB - SWING SEAT YELLOW - A100070 (2) KN - CHAIN GREEN 31" - A100177 (1) (6) FA - QUICK LINK - A100069 - TRAPEZE - A6P00034 STEP 20 ATTACH FB SWING SEAT TO (2) EZ CHAINS USING (2) FA QUICK LINKS, AS SHOWN (FIG. 1). REPEAT PROCESS TO ASSEMBLE SECOND SWING ASSEMBLY. NOW, ATTACH EZ CHAINS TO SWING HANGER QUICK LINKS ALREADY ASSEMBLED TO THE SWING BEAM (FIG. 2). ATTACH TRAPEZE TO (2) FW CHAINS USING (2) FA QUICK LINKS. (FIG.
(1) SS - "C" REVISION TAG - A100316 (6) KC - METAL GROUND STAKE BROWN - A100178 ANCHORING INSTRUCTIONS NOTE: (4) FAILURE TO USE GROUND STAKES CAN VOID WARRANTY & CAUSE INJURY! (2) STAKE A STAKE A BOLT WH 1/4x1/2" STAKE A (6) WASHER LOCK EXT 8x15 (6) H80 BOLT WH 1/4x1 WASHER FLAT 9x18 SWING (6) NUT BARREL WH 1/4x5/8 (2) SCREW PWH 8x5/8 STAKE B L3 SWING STAKE B STAKE B STEP 21 STAKE A: HAMMER STAKES INTO GROUND AGAINST BOARDS WHERE SHOWN.
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
