Instructions / Assembly

Owner’s Manual Play House
OWNER PH-2011
• all moving parts including swing seats, ropes, cables, and chains for wear, Check
rust, or deterioration. Replace as needed.
• Check metal parts for rust. If found, sand and repaint using non Lead-based paint
meeting the requirements of Title 16 CRF Part 1303.
• Modifications not approved by the party responsible for compliance could void
user’s authority to operate the equipment.
• Check all wood members for deterioration and splinters. Sand down and splinters
and replace deteriorating members.
• Reinstall any plastic parts, such as swing seats or any other items that were
removed in the cold season.
• Rake and check depth of loose fill protective surfacing materials to prevent
compaction and to maintain appropriate depth. Replace as necessary.
Twice a month during play season:
• Tighten all hardware.
• Lubricate all metallic moving parts per manufacture’s instructions.
• Check all protective coverings on bolts, pipes, edges and corners. Replace if
they are loose, cracked, or missing.
• Check all moving parts including swing seats, ropes, cables, and chains for wear,
rust, or deterioration. Replace as needed.
• Rake and check depth of loose fill protective surfacing materials to prevent
compaction and to maintain appropriate depth. Replace as necessary.
At the end of each play season or when the temperature drops below 32° F:
• Remove plastic swing seats and other items as specified by the manufacturer
and take indoors or do not use.
• Rake and check depth of loose fill protective surfacing materials to prevent
compaction and to maintain appropriate depth. Replace as necessary.
Additional Maintenance:
• Check the swing beam and hardware every two weeks due to wood expansion
and contraction. It is particularly important that this procedure be followed at the
beginning of each season.
• Inspect all wood members monthly. The grain of the wood sometimes will lift in
the dry season causing splinters to appear. Light sand may be necessary to
maintain a safe playing environment. Treat your play house with stain regularly,
to help prevent severe checking/splitting and other weather damage.
• We have applied a waterborne transparent stain to your unit. This is done for
color only. Once or twice a year, depending on your climate conditions, you must
apply some type of protection (sealant) to the wood of your unit. Prior to the
application of sealant, lightly sand any “rough” spots on your play house. Please
note this is a requirement of your warranty.
• Creating and maintaining the Play house on a level location is very important.
Make sure the play house is level and true once each year or at the beginning of
each play season.
• Rake the surface periodically to prevent compaction and maintain appropriate
depths.
Owners shall be responsible for maintaining the legibility of the warning labels.