WOODLAND PLAYHOUSE Model: #6115 WARNING Adult Assembly Required. Not suitable for children under two years, due to sharp points and small parts. • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Manufacturer: Backyard Discovery 3001 North Rouse Pittsburg, KS 66762 1-800-856-4445 Register your new play house on-line @ www.swingsetsonline.
STOP Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com 1-800-765-4138 PLEASE READ THIS BEFORE STARTING ASSEMBLY • • • • • READ THE ASSEMBLY MANUAL COMPLETELY, PAYING SPECIAL ATTENTION TO THE IMPORTANT TIPS AND SAFETY INFORMATION.
Owner’s Manual Play House Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 2 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play House Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Play house 1. The Play house is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play house tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play House The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth Wood Chips Double-Shredded bark mulch Engineered Wood Fibers Fine Sand Coarse Sand Fine Gravel Medium Gravel 6" (152mm) 7' (2.13m) 6' (1.83m) 6' (1.83m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 9" (228mm) 10' (3.05m) 10' (3.05m) 7' (2.13m) 5' (1.52m) 5' (1.
Owner’s Manual Play House • • • • • • all moving parts including swing seats, ropes, cables, and chains for wear, Check rust, or deterioration. Replace as needed. Check metal parts for rust. If found, sand and repaint using non Lead-based paint meeting the requirements of Title 16 CRF Part 1303. Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment. Check all wood members for deterioration and splinters.
Owner’s Manual Play House Disposal Instructions: When the Play house use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit is discarded.
Owner’s Manual Play House APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information:. www.cpsc.gov/cpscpub/pubs/323.html X3. CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS11 X3.
Owner’s Manual Play House 11 This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1800-638-2772.
Play House Assembly Manual FAQs: 1. Does the area for the play house need to be level? Yes. Backyard Discovery recommends the play house be positioned on a flat level area for maximum safety and durability. Any stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the play house? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the play house for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
SAFETY AND ASSEMBLY INFORMATION SELECTING THE CORRECT LOCATION FOR YOUR PLAY PRODUCT IS IMPORTANT FOR YOUR CHILDREN’S SAFETY AND THE PRODUCT’S LONGEVITY Dimensions: General Information: • The Woodland has one layout option. Layout: Ground Dimension 5'-6 11/16" x 6'-1 9/16" x 75" Tall Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use. A maximum of 120 lbs.
Parts Identification Wood Components (NOT TO SCALE) (2) A1 - PORCH POST - W4L04456 2"x2"x42 1/8" (50x50x1069) (2) A2 - BENCH POST - W4L04407 2"x2"x18 1/4" (50x50x465) (2) G1 - AWNING RAIL - W4L04410 1"x5 1/4"x10" (24x134x254) (1) J1 - DOOR HEADER - W4L04900 1 1/8"x2 3/8"x17" (27x60x431) (4) M1 - BENCH SEAT - W4L04404 5/8"x3 3/8"x18 1/4" (16x86x464) (2) M2 - BENCH ARM REST - W4L04408 5/8"x3 3/8"x12" (16x86x306) (2) N1 - BENCH SEAT SUPPORT - W4L04405 5/8"x2 3/8"x11 1/8" (16x60x284) (2) N2 - BEN
Parts Identification Wood Components (NOT TO SCALE) (2) (2) N8 - TIE STRAP - W4L04903 5/8”x3 3/8”x3 3/8” (16x86x86) O1 - BENCH SAFETY RAIL - W4L04415 5/8"x1 3/8"x11 1/8" (16x34x284) (9) O2 - AWNING SLAT - W4L04583 3/8"x1 3/8"x22 7/8" (9x34x582) (1) O3 - NOTCHED AWNING SLAT - W4L04902 3/8"x1 3/8"x22 7/8" (9x34x582) (2) T1 - CORNER BENCH BRACE - W4L04414 1"x1"x12 1/8" (24x24x309) (1) WP1 - LEFT FRONT CORNER ASSEMBLY - W2A01550 (1) WP2 - RIGHT FRONT CORNER ASSEMBLY - W2A01551 (1) WP4 - LEFT BENCH
Parts Identification Wood Components (NOT TO SCALE) (1) WP6 - COUNTER TOP ASSEMBLY - W2A01557 (1) WP9 - BOTTOM LEFT SIDE PANEL - W2A01544 (1) WP7 - PICKET FENCE WALL ASSEMBLY - W2A01450 (1) WP10 - TOP LEFT SIDE PANEL - W2A01545 (2) WP11 - HEADER ASSEMBLY - W2A01558 (2) RP1 - ROOF PANEL - W2A01559 (1) WP8 - RIGHT REAR CORNER ASSEMBLY - W2A01553 (1) DP1 - DOOR PANEL - W2A01417 (2) GP1 - GABLE END ASSEMBLY - W2A01562 (1) RP2 - PORCH ROOF ASSEMBLY - W2A01444 (2) RP3 - ROOF PANEL - W2A01560
Parts Identification Hardware (4) CV - SCREW PFH 8x1/2 - H100124 (24) BN - SCREW PFH 8x1 - H100085 (66) BR - SCREW PFH 8x1 1/8 - H100088 (4) CT - SCREW TAPPING 8x1/2 - H100123 (2) CY - SCREW PWH 8x5/8 - H100128 (19) BC - SCREW PWH 8x3/4 - H100070 (77) BQ - SCREW PFH 8x1 1/4 - H100087 (22) - SCREW PFH 6x1-1/4 - H100359 (2) BP - SCREW PFH 8x1 1/2 - H100086 (34) BS - SCREW PFH 8x1 3/4 - H100089 (7) BT - SCREW PFH 8x2 1/2 - H100090
Parts Identification Accessories (NOT TO SCALE) (1) JS - SQUARE SINK BOWL - A100129 (1) - STOVE KIT - A6P00025 (1) - FLOWER POT HOLDER - A6P00023 (1) SQ - "A" REVISION TAG - A100314 (1) - FAUCET KIT - A6P00024 (1) - BYD ID TAG (MEDIUM) AGES 2 TO 10 - A4M00528 (1) DOOR KNOB KIT - A6P00020 (1) MS - PHONE KIT - A100132
Parts Identification Accessories (NOT TO SCALE) (1) WE - CUPOLA ROOF - A100386 (1) WD - CUPOLA LOUVER - A100385 (1) - CUPOLA BASE - 45 DEGREE - A6P00018 (2) MV - METAL TIE STRAP - A100257 (1) MAILBOX KIT - A6P00017
PLAYHOUSE ASSEMBLY STEP 1: PLACE CORNER PANELS IN A SQUARE SHAPE, AS SHOWN.
(1) N7 - WALL CLEAT - W4L04901 3/8"x2 3/8"x41 1/2" (11x60x1053) STEP 2: N7 (10) SCREW PFH 8x1 1/8 (10 PLCS) SCREW PFH 8x1 1/8 REAR RIGHT LEFT FRONT
(1) WP9 - BOTTOM LEFT SIDE PANEL - W2A01544 STEP 3: (1) WP10 - TOP LEFT SIDE PANEL - W2A01545 WP10 WP9 (14) SCREW PFH 8x1 SCREW PFH 8x1 (4 PLCS) LEFT SCREW PFH 8x1 (10 PLCS) REAR FRONT RIGHT
(2) MV - METAL TIE STRAP - A100257 STEP 4: LEFT FRONT (8) SCREW PWH 8x3/4 RIGHT REAR METAL TIE STRAP (1 PLC) SCREW PWH 8x3/4 (8 PLCS)
(1) J1 - DOOR HEADER - W4L04900 1 1/8"x2 3/8"x17" (27x60x431) (2) N8 - TIE STRAP - W4L04903 5/8”x3 3/8”x3 3/8” (16x86x86) STEP 5: N8 J1 (8) SCREW PFH 8x1 1/8 (8 PLCS) N8 FRONT LEFT E RIGHT REAR SCREW PFH 8x1 1/8
(1) MV - METAL TIE STRAP - A100257 STEP 6: REAR RIGHT (8) FRONT LEFT SCREW PWH 8x3/4 (8 PLCS) METAL TIE STRAP (1 PLC) SCREW PWH 8x3/4
(4) N4 - TIE STRAP - W102424 5/8”x2”x3 1/8” (16x50x80) STEP 7: 1 9/16" (8) SCREW PFH 8x1 1/8 (8 PLCS) REAR RIGHT LEFT FRONT SCREW PFH 8x1 1/8
(2) WP11 - HEADER ASSEMBLY - W2A01558 STEP 8: SCREW PFH 8x2 1/2 (2 PLCS) (12) SCREW PFH 8x1 1/8 SCREW PFH 8x1 1/8 (8 PLCS) WP11 REAR (4) SCREW PFH 8x2 1/2 RIGHT WP11 SCREW PFH 8x1 1/8 (4 PLCS) LEFT FRONT FRONT TIE BLOCK ATTACHMENT SCREW PFH 8x2 1/2 (2 PLCS)
(1) N6 - TIE STRAP - W4L04539 5/8”x2”x4 7/8” (16x50x125) (1) DP1 - DOOR PANEL - W2A01417 (1) DOOR KNOB KIT - A6P00020 STEP 9: 14" N6 1 1/2" (3) SCREW PFH 8x1 (3 PLCS) DOOR STOP INSTALL SCREW PFH 8x1 (8) SCREW PFH 8x1 1/8 LEFT DP1 SCREW PFH 8x1 1/8 (8 PLCS) DOOR INSTALL FRONT 3/4" KNOB RIGHT FACE PLATE DOOR KNOB INSTALL LATCH SCREW PFH 8x1/2 (1 PLC) INCLUDED IN KIT SCREW PFH 8x3/4 (2 PLCS) INCLUDED IN KIT REAR
(1) WP6 - COUNTER TOP ASSEMBLY - W2A01557 STEP 10: SCREW PFH 8x1 3/4 (1 PLC) PRE-DRILLED HOLE (4) (1) SCREW PFH 8x1 3/4 REAR RIGHT 15 3/8" LEFT FRONT SCREW PFH 8x1 1/4 (2 PLCS) PRE-DRILLED HOLES SCREW PFH 8x1 1/4 (2 PLCS) PRE-DRILLED HOLES SCREW PFH 8x1 1/4
(2) N3 - SMALL WINDOW SHELF - W4L04409 5/8"x2 3/8"x10 1/8" (16x60x257) (1) N5 - LARGE WINDOW SHELF - W4L04413 5/8"x2 3/8"x16 1/8" (16x60x409) STEP 11: RIGHT FRONT (9) N3 REAR LEFT N5 SCREW PFH 8x1 1/4 (9 PLCS) ALL (3) LOCATIONS. FLUSH WITH WALL PANEL.
(4) N4 - TIE STRAP - W102424 5/8”x2”x3 1/8” (16x50x80) (2) GP1 - GABLE END ASSEMBLY - W2A01562 STEP 12: SCREW PFH 8x1 1/8 (16 PLCS) N4 (16) SCREW PFH 8x1 1/8 GP1 GP1 REAR RIGHT 1 3/4" Y 1 9/16" LEFT TIE BLOCK LOCATION FRONT
(2) RP1 - ROOF PANEL - W2A01559 STEP 13: SCREW PFH 8x1 3/4 (8) SCREW PFH 8x1 3/4 (8 PLCS) RP1 RP1 RIGHT REAR LEFT FRONT
(2) RP3 - ROOF PANEL - W2A01560 BOTTOM OF PANEL STEP 14: (8) SCREW PFH 8x1 3/4 RP3 SCREW PFH 8x1 3/4 (8 PLCS) RP3 REAR RIGHT LEFT FRONT
(2) G1 - AWNING RAIL - W4L04410 1"x5 1/4"x10" (24x134x254) STEP 15: SCREW PFH 8x1 3/4 (4 PLCS) PRE-DRILLED HOLES G1 (4) SCREW PFH 8x1 3/4 REAR RIGHT LEFT FRONT
(1) O3 - NOTCHED AWNING SLAT - W4L04902 3/8"x1 3/8"x22 7/8" (9x34x582) (9) O2 - AWNING SLAT - W4L04583 3/8"x1 3/8"x22 7/8" (9x34x582) STEP 16: O2 (20) SCREW PFH 6x1-1/4 O3 START HERE SCREW PFH 6x1-1/4 (20 PLCS) REAR RIGHT LEFT FRONT
(1) JS - SQUARE SINK BOWL - A100129 STEP 17: SCREW PWH 8x3/4 (2 PLCS) (2) SCREW PWH 8x3/4 SQUARE SINK BOWL REAR AE RIGHT LEFT FRONT
(1) - FAUCET KIT - A6P00024 STEP 18: (2) LEFT REAR FRONT RIGHT SCREW PFH 8x1 1/2 (2 PLCS) FAUCET KIT 4" FRONT SCREW PFH 8x1 1/2
(1) - STOVE KIT - A6P00025 STEP 19: (4) REAR RIGHT LEFT FRONT SCREW PFH 8x1 (4 PLCS) 6" STOVE KIT 3" STOVE KIT LOCATION SCREW PFH 8x1
(1) MS - PHONE KIT - A100132 STEP 20: (2) REAR RIGHT LEFT FRONT PHONE KIT SCREW PFH 8x1/2 (2 PLCS) 2 3/8" 8 1/4" PHONE KIT INSTALL SCREW PFH 8x1/2
(1) - FLOWER POT HOLDER - A6P00023 STEP 21: FLOWER POT HOLDER PRESS FLOWER POT SUPPORTS INTO CHANNELS AS SHOWN.
(1) WP7 - PICKET FENCE WALL ASSEMBLY - W2A01450 STEP 22: (4) SCREW PFH 8x1 1/4 WP7 FRONT LEFT SCREW PFH 8x1 1/4 (4 PLCS)
(1) MAILBOX KIT - A6P00017 STEP 23: MAILBOX FRAME MAILBOX FRAME MAILBOX BODY (1) SCREW PFH 8x1 ALIGN HOLES DURING MAILBOX BODY INSTALLATION. MAILBOX FLAG SCREW PFH 8x1 (1 PLC) MAILBOX MACHINE SCREW (INCLUDED IN KIT) MAILBOX HANDLE MAILBOX REAR DOOR MAILBOX FRONT DOOR MAILBOX BASE MAILBOX MACHINE SCREW (INCLUDED IN KIT) ATTACH MAILBOX BASE TO PICKET FENCE POST USING (1) 8x1" PFH SCREW. PRESS MAILBOX BODY INTO INSIDE OF MAILBOX FRAMES AND ATTACH TO BASE USING (4) MAILBOX MACHINE SCREWS.
(1) WE - CUPOLA ROOF - A100386 (1) - CUPOLA BASE - 45 DEGREE - A6P00018 (1) WD - CUPOLA LOUVER - A100385 STEP 24: SINGLE RIB RESTS BETWEEN DOUBLE RIBS SHOWN ON PREVIOUS PANEL. DOUBLE RIBS (4) SCREW TAPPING 8x1/2 CUPOLA LOUVER ASSEMBLY CONNECTOR TAB FOLD CUPOLA LOUVER PANEL INTO SQUARE SHAPE AND LOCK INTO PLACE BY SLIDING CONNECTOR TAB INTO CONNECTOR SLOT. CONNECTOR SLOT CUPOLA ROOF CONNECTOR SLOTS (4) SCREW TAPPING 8x1/2 CENTERED ON ROOF.
(2) (1) RP2 - PORCH ROOF ASSEMBLY - W2A01444 A1 - PORCH POST - W4L04456 2"x2"x42 1/8" (50x50x1069) STEP 25: (6) SCREW PFH 8x1 3/4 (2 PLCS) SCREW PFH 8x1 3/4 (4 PLCS) FRONT RIGHT SCREW PFH 8x1 3/4
(2) N2 - BENCH SEAT SUPPORT - W4L04457 5/8"x2 3/8"x13 1/4" (16x60x335) STEP 26: (8) SCREW PFH 8x1 1/4 RIGHT FRONT N2 N2 9 3/4" RIGHT SCREW PFH 8x1 1/4 (8 PLCS) 3/16"
(2) A2 - BENCH POST - W4L04407 2"x2"x18 1/4" (50x50x465) (2) N1 - BENCH SEAT SUPPORT - W4L04405 5/8"x2 3/8"x11 1/8" (16x60x284) STEP 27: (8) A2 FRONT SCREW PFH 8x1 1/4 (8 PLCS) RIGHT N1 A2 N1 9 3/4" SCREW PFH 8x1 1/4
(4) M1 - BENCH SEAT - W4L04404 5/8"x3 3/8"x18 1/4" (16x86x464) STEP 28: (16) SCREW PFH 8x1 1/4 SCREW PFH 8x1 1/4 (16 PLCS) RIGHT FRONT M1 3/16" TYP (3 SPCS) BENCH SEAT SPACING M1
(1) WP5 -RIGHT BENCH BACK ASSEMBLY - W2A01446 (1) WP4 - LEFT BENCH BACK ASSEMBLY - W2A01445 STEP 29: (6) WP5 WP4 FRONT RIGHT 5/8" SCREW PFH 8x1 1/4 (6 PLCS) SCREW PFH 8x1 1/4
(2) T1 - CORNER BENCH BRACE - W4L04414 1"x1"x12 1/8" (24x24x309) STEP 30: (6) (4) SCREW PFH 8x1 3/4 T1 RIGHT FRONT FLUSH SCREW PFH 8x1 3/4 (4 PLCS) SCREW PFH 8x1 1/4 (6 PLCS) T1 SCREW PFH 8x1 1/4
(2) O1 - BENCH SAFETY RAIL - W4L04415 5/8"x1 3/8"x11 1/8" (16x34x284) STEP 31: (4) O1 FRONT RIGHT O1 SCREW PFH 8x1 1/4 (4 PLCS) 2 1/2" SCREW PFH 8x1 1/4
(2) M2 - BENCH ARM REST - W4L04408 5/8"x3 3/8"x12" (16x86x306) STEP 32: (4) (2) SCREW PFH 8x1 1/4 SCREW PFH 8x2 1/2 M2 FRONT RIGHT SCREW PFH 8x1 1/4 (4 PLCS) M2 SCREW PFH 8x2 1/2 (2 PLCS)
(1) SQ - "A" REVISION TAG - A100314 (1) - BYD ID TAG (MEDIUM) AGES 2 TO 10 - A4M00528 STEP 33: (2) SCREW PFH 8x1/2 (2) SCREW PWH 8x5/8 BYD ID TAG (MEDIUM) AGES 2 TO 10 SCREW PFH 8x1/2 (2 PLCS) 8 1/16" SCREW PWH 8x5/8 (2 PLCS) "A" REVISION TAG 2 1/2" IDENTIFICATION TAG LOCATION
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied. This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of consequential damages and therefore this limitation may not apply to you.
