COLUMBUS PLAYHOUSE Model: #55036 Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 1-800-856-4445 WARNING Adult Assembly Required. Not suitable for children under two years, due to sharp points and small parts. •• •• •• •• Owner's Manual Frequently Asked Questions Assembly Instructions Warranty Information Register your new play house on-line @ www.swingsetsonline.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto.
Owner’s Manual Play House Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 2 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play House Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Play house 1. The Play house is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play house tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play House The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth Wood Chips Double-Shredded bark mulch Engineered Wood Fibers Fine Sand Coarse Sand Fine Gravel Medium Gravel 6" (152mm) 7' (2.13m) 6' (1.83m) 6' (1.83m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 5' (1.52m) 9" (228mm) 10' (3.05m) 10' (3.05m) 7' (2.13m) 5' (1.52m) 5' (1.
Owner’s Manual Play House • • • • • • all moving parts including swing seats, ropes, cables, and chains for wear, Check rust, or deterioration. Replace as needed. Check metal parts for rust. If found, sand and repaint using non Lead-based paint meeting the requirements of Title 16 CRF Part 1303. Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment. Check all wood members for deterioration and splinters.
Owner’s Manual Play House Disposal Instructions: When the Play house use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit is discarded.
Owner’s Manual Play House APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information:. www.cpsc.gov/cpscpub/pubs/323.html X3. CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS11 X3.
Owner’s Manual Play House 11 This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1800-638-2772.
Play House Assembly Manual FAQs: 1. Does the area for the play house need to be level? Yes. Backyard Discovery recommends the play house be positioned on a flat level area for maximum safety and durability. Any stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the play house? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the play house for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
SAFETY AND ASSEMBLY INFORMATION SELECTING THE CORRECT LOCATION FOR YOUR PLAY PRODUCT IS IMPORTANT FOR YOUR CHILDREN’S SAFETY AND THE PRODUCT’S LONGEVITY Dimensions: General Information: • The Chalet has one layout option. Layout Ground Dimension 11 3 1 Safe Play Area* 3'-10 16" x 3'-9 8" x 56 2" Tall 11 3 15'-10 16" x 15'-9 8" *Level Ground Surface - See below Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs.
Parts Identification Wood Components (NOT TO SCALE) H1 - CENTER COUNTER SUPPORT - W4L05576 (1) 1"x3 3/8"x8 3/8" (24x86x213) J1 - OUTER COUNTER SUPPORT - W4L05575 (2) 1"x2 3/8"x8 3/8" (24x60x213) K80 - SUNBURST HALF MOON - W103694 (2) 5/8"x3 3/4"x10 3/8" (16x96x264) L1 - WINDOW UPRIGHT - W4L05573 (4) 5/8"x4 3/8"x27 3/4" (16x112x705) L2 - REAR COUNTER TOP - W4L05577 (1) 5/8"x4 3/8"x36 3/4" (16x112x934) L3 - FRONT COUNTER TOP - W4L05578 (1) 5/8"x4 3/8"x37 3/8" (16x112x950) L4 - FRONT HEADER BOARD
Parts Identification Wood Components (NOT TO SCALE) DP1 - DOOR PANEL - W2A01761 (1) 1 1/8"x13"x17 1/4" (27x330x438) (1) WP1 - LEFT FRONT WALL PANEL - W2A01759 1 1/8"x12 5/8"x39 7/8" (27x320x1014) (1) WP3 - LEFT RIGHT SIDE WALL PANEL - W2A01762 1 1/8"x12 5/8"x39 7/8" (27x320x1014) (1) WP2 - RIGHT FRONT WALL PANEL - W2A01760 1 1/8"x12 5/8"x39 7/8" (27x320x1014) (1) WP4 - RIGHT RIGHT SIDE WALL PANEL - W2A01763 1 1/8"x12 5/8"x39 7/8" (27x320x1014)
Parts Identification Wood Components (NOT TO SCALE) (1) WP5 - CENTER RIGHT SIDE WALL PANEL - W2A01764 1 1/4"x15 5/8"x13" (32x396x330) (1) (1) WP6 - REAR WALL PANEL - W2A01765 1 1/8"x39 1/8"x13" (27x994x330) WP7 - LEFT WALL PANEL - W2A01766 1 1/8"x38 3/4"x13" (27x984x330) RP1 - PEAK ROOF PANEL - W2A01767 (2) 1 3/8"x7 5/8"x44 5/8" (35x195x1134) RP2 - MIDDLE ROOF PANEL - W2A01768 (2) 1 3/8"x9 3/4"x44 5/8" (35x248x1134) RP3 - LOWER ROOF PANEL - W2A01769 (2) 1 3/8"x9 3/4"x44 5/8" (35x248x1134)
Parts Identification Hardware (4) WASHER LOCK EXT 8x19 - H100030 (4) T-NUT 5/16 - H100074 (4) BOLT WH 5/16x1 1/4 - H100009 (4) SCREW PFH 6x1 - H100174 (2) SCREW PWH 8x7/16 - H100361 (9) SCREW PFH 8x1 - H100085 (2) SCREW PWH 8x5/8 - H100128 (55) SCREW PFH 8x1 1/8 - H100088 (29) SCREW PFH 8x1 1/4 - H100087 (26) SCREW PWH 8x5/8 BLK - H100202 (6) SCREW PFH 8x1 1/2 - H100086 (26) SCREW PFH 8x1 3/4 - H100089 (9) SCREW PWH 8x3/4 BLK - H100392 (2) T-40 TORX BIT - A100042 (2) T-40 TORX WRENCH - A100041
Parts Identification Accessories (NOT TO SCALE) (1) "A" REVISION TAG - A100314 (11) 90° L-BRACKET - BLK - A4M00555 (1) SURFACE MOUNT BASIN - A6P00032 (1) FAUCET KIT - A6P00024 (1) STOVE KIT - A6P00025 (1) METAL TIE STRAP - A4M00517 (1) KNOB KIT - A6P00020 (1) BYD ID TAG (MEDIUM) AGES 2 TO 10 - A4M00528 (2) FLOWER POT HOLDER - A6P00023
(1) WP2 - RIGHT FRONT WALL PANEL - W2A01760 1 1/8"x12 5/8"x39 7/8" (27x320x1014) (1) WP3 - LEFT RIGHT SIDE WALL PANEL - W2A01762 1 1/8"x12 5/8"x39 7/8" (27x320x1014) (2) 90° L-BRACKET - BLK - A4M00555 STEP 1: PLAYHOUSE ASSEMBLY (4) SCREW PWH 8x5/8 BLK 90° L-BRACKET - BLK (1 PLC) WP3 WP2 SCREW PWH 8x5/8 BLK (2 PLCS) 90° L-BRACKET - BLK (1 PLC) SCREW PWH 8x5/8 BLK (2 PLCS)
(1) WP5 - CENTER RIGHT SIDE WALL PANEL - W2A01764 1 1/4"x15 5/8"x13" (32x396x330) STEP 2: (4) SCREW PFH 8x1 SCREW PFH 8x1 (4 PLCS) WP5 RIGHT FRONT
(1) WP4 - RIGHT RIGHT SIDE WALL PANEL - W2A01763 1 1/8"x12 5/8"x39 7/8" (27x320x1014) STEP 3: (4) SCREW PFH 8x1 WP4 SCREW PFH 8x1 (4 PLCS) RIGHT FRONT
(2) 90° L-BRACKET - BLK - A4M00555 (1) WP6 - REAR WALL PANEL - W2A01765 1 1/8"x39 1/8"x13" (27x994x330) STEP 4: 90° L-BRACKET - BLK (2 PLCS) REAR (4) SCREW PWH 8x5/8 BLK RIGHT RIGHT SCREW PWH 8x5/8 BLK (4 PLCS) WP6 REAR FRONT
(2) 90° L-BRACKET - BLK - A4M00555 (1) WP7 - LEFT WALL PANEL - W2A01766 1 1/8"x38 3/4"x13" (27x984x330) STEP 5: 90° L-BRACKET - BLK (2 PLCS) (4) SCREW PWH 8x5/8 BLK (4 PLCS) WP7 REAR LEFT RIGHT FRONT SCREW PWH 8x5/8 BLK
(2) 90° L-BRACKET - BLK - A4M00555 WP1 - LEFT FRONT WALL PANEL - W2A01759 (1) 1 1/8"x12 5/8"x39 7/8" (27x320x1014) STEP 6: 3/16" GAP REQUIRED (4) SCREW PWH 8x5/8 BLK WP1 FRONT 90° L-BRACKET - BLK (2 PLCS) SCREW PWH 8x5/8 BLK (4 PLCS) LEFT RIGHT REAR
J1 - OUTER COUNTER SUPPORT - W4L05575 (2) 1"x2 3/8"x8 3/8" (24x60x213) STEP 7: FRONT (4) SCREW PFH 8x1 1/4 FLUSH LEFT RIGHT REAR FLUSH J1 SCREW PFH 8x1 1/4 (4 PLCS) J1
H1 - CENTER COUNTER SUPPORT - W4L05576 (1) 1"x3 3/8"x8 3/8" (24x86x213) STEP 8: H1 (1) SCREW PFH 8x1 1/2 (1 PLC) SCREW PFH 8x1 1/2 RIGHT REAR FRONT LEFT
L1 - WINDOW UPRIGHT - W4L05573 (2) 5/8"x4 3/8"x27 3/4" (16x112x705) STEP 9: L1 SCREW PFH 8x1 1/8 (4 PLCS) (4) L1 REAR LEFT RIGHT FRONT SCREW PFH 8x1 1/8
L1 - WINDOW UPRIGHT - W4L05573 (2) 5/8"x4 3/8"x27 3/4" (16x112x705) (3) 90° L-BRACKET - BLK - A4M00555 STEP 10: L1 (6) SCREW PWH 8x5/8 BLK (4) SCREW PFH 8x1 1/8 SCREW PWH 8x5/8 BLK (6 PLCS) L1 REAR LEFT SCREW PFH 8x1 1/8 (4 PLCS) FRONT RIGHT
L2 - REAR COUNTER TOP - W4L05577 (1) 5/8"x4 3/8"x36 3/4" (16x112x934) STEP 11: SCREW PFH 8x1 1/8 (6 PLCS) L2 (6) REAR P RIGHT LEFT FRONT SCREW PFH 8x1 1/8
L3 - FRONT COUNTER TOP - W4L05578 (1) 5/8"x4 3/8"x37 3/8" (16x112x950) STEP 12: SCREW PFH 8x1 1/8 (6 PLCS) L3 (6) REAR RIGHT LEFT FRONT SCREW PFH 8x1 1/8
(1) METAL TIE STRAP - A4M00517 STEP 13: (8) 13 7/8" SCREW PWH 8x3/4 BLK FRONT 1/2" SCREW PWH 8x3/4 BLK (8 PLCS) METAL TIE STRAP (1 PLC) LEFT RIGHT REAR
L5 - SIDE HEADER BOARD - W4L05580 (1) 5/8"x4 3/8"x39 3/8" (16x112x1000) STEP 14: SCREW PFH 8x1 1/8 (2 PLCS) (2) L5 U REAR RIGHT LEFT FRONT SCREW PFH 8x1 1/8
L5 - SIDE HEADER BOARD - W4L05580 (1) 5/8"x4 3/8"x39 3/8" (16x112x1000) STEP 15: L5 SCREW PFH 8x1 1/8 (2 PLCS) (2) REAR V LEFT FRONT RIGHT SCREW PFH 8x1 1/8
1 5/16 L4 - FRONT HEADER BOARD - W4L05579 (1) 5/8"x4 3/8"x40 3/8" (16x112x1026) STEP 16: SCREW PFH 8x1 1/2 (2 PLCS) (4) (2) RIGHT L4 REAR LEFT FRONT SCREW PFH 8x1 1/4 (4 PLCS) SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/4
L6 - REAR HEADER BOARD - W4L05581 5/16 (1) 5/8"x4 3/8"x40 3/8" (16x112x1026) 1 STEP 17: L6 (2) SCREW PFH 8x1 1/8 (4) SCREW PFH 8x1 1/4 SCREW PFH 8x1 1/4 (4 PLCS) RIGHT FRONT SCREW PFH 8x1 1/8 (2 PLCS) REAR LEFT
(1) "A" REVISION TAG - A100314 STEP 18: REAR RIGHT (2) LEFT FRONT SCREW PWH 8x5/8 BLK (2 PLCS) "A" REVISION TAG (1 PLC) SCREW PWH 8x5/8 BLK
(1) SURFACE MOUNT BASIN - A6P00032 STEP 19: SCREW PWH 8x5/8 (2 PLCS) (2) REAR RIGHT LEFT FRONT SCREW PWH 8x5/8
(1) FAUCET KIT - A6P00024 STEP 20: (2) SCREW PFH 8x1 1/2 FAUCET KIT (1 PLC) SCREW PFH 8x1 1/2 (2 PLCS) 3/4" LEFT RIGHT
(1) STOVE KIT - A6P00025 STEP 21: SCREW PFH 8x1 1/8 (4 PLCS) (4) STOVE KIT (1 PLC) REAR RIGHT AD LEFT FRONT SCREW PFH 8x1 1/8
N1 - WINDOW SHELF - W4L05574 (1) 5/8"x2 3/8"x38 3/4" (16x60x984) STEP 22: REAR RIGHT (5) SCREW PFH 8x1 1/8 LEFT FRONT SCREW PFH 8x1 1/8 (5 PLCS) N1
DP1 - DOOR PANEL - W2A01761 (1) 1 1/8"x13"x17 1/4" (27x330x438) STEP 23: REAR LEFT (4) RIGHT FRONT DP1 5/8" UP FROM METAL TIE STRAP.
(1) KNOB KIT - A6P00020 STEP 24: KNOB KIT (1 PLC) FACE PLATE (1 PLC) LATCH (1 PLC) SCREW PFH 8x1 (1 PLC) INCLUDED IN KIT FRONT LEFT SCREW PFH 8x3/4 (2 PLCS) INCLUDED IN KIT RIGHT REAR
N3 - DOOR STOP - W4L04761 (1) 5/8"x2 3/8"x3 7/8" (16x60x100) STEP 25: (3) RIGHT SCREW PFH 8x1 1/4 LEFT SCREW PFH 8x1 1/4 (3 PLCS) N3 2 3/8"
M1 - GABLE BOARD - W4L05582 (4) 5/8"x3 3/8"x26 1/2" (16x86x674) STEP 26: M1 WASHER LOCK EXT 8x19 (4 PLCS) (4) BOLT WH 5/16x1 1/4 (4) WASHER LOCK EXT 8x19 (4) T-NUT 5/16 BOLT WH 5/16x1 1/4 (4 PLCS) T-NUT 5/16 (4 PLCS) M1 M1 M1 RIGHT AJ REAR LEFT FRONT
(2) RP1 - PEAK ROOF PANEL - W2A01767 1 3/8"x7 5/8"x44 5/8" (35x195x1134) STEP 27: RP1 (8) SCREW PFH 8x1 3/4 RP1 SCREW PFH 8x1 3/4 (8 PLCS) RIGHT REAR LEFT FRONT
(2) RP2 - MIDDLE ROOF PANEL - W2A01768 1 3/8"x9 3/4"x44 5/8" (35x248x1134) STEP 28: SCREW PFH 8x1 3/4 (8 PLCS) RP2 (8) SCREW PFH 8x1 3/4 RP2 RIGHT REAR LEFT FRONT
RP3 - LOWER ROOF PANEL - W2A01769 (2) 1 3/8"x9 3/4"x44 5/8" (35x248x1134) STEP 29: RP3 RIGHT (8) SCREW PFH 8x1 3/4 RP3 REAR SCREW PFH 8x1 3/4 (8 PLCS) LEFT FRONT
N87 - VERTICAL SUNBURST SPOKE - W103695 (2) 5/8"x2 3/8"x12 3/4" (16x60x324) N86 - SUNBURST SPOKE - W103696 K80 - SUNBURST HALF MOON - W103694 (4) 5/8"x2 3/8"x7 3/4" (16x60x198) (2) 5/8"x3 3/4"x10 3/8" (16x96x264) STEP 30: SCREW PFH 8x1 1/8 (4 PLCS) N87 N86 N86 (16) SCREW PFH 8x1 1/8 (4) SCREW PFH 8x1 1/4 K80 CENTERED TWO SUNBURST ASSEMBLIES REQUIRED. SCREW PFH 8x1 1/8 (8 PLCS) ROOF PARTS NOT SHOWN FOR EASE OF ASSEMBLY.
(2) FLOWER POT HOLDER - A6P00023 STEP 31: RIGHT (8) SCREW PFH 8x1 1/4 FLOWER POT HOLDER FRONT FLOWER POT HOLDER REAR LEFT SCREW PFH 8x1 1/4 (8 PLCS)
(1) BYD ID TAG (MEDIUM) AGES 2 TO 10 - A4M00528 STEP 32: (2) LEFT SCREW PWH 8x7/16 RIGHT SCREW PWH 8x7/16 (2 PLCS) 5 5/8" FRONT BYD ID TAG (MEDIUM) AGES 2 TO 10 4"
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied. This Warranty gives you specific legal rights. You may have other rights as well which vary from state to state or province to province. This warranty excludes all consequential damages, however, some states do not allow the limitation or exclusion of consequential damages and therefore this limitation may not apply to you.
