Instructions / Assembly

Anchoring Instructions
STEP 32
ATTACH TO MONKEY BAR AND SWING
BEAM USING 1" BOLTS, FLAT
WASHERS, 8X19 LOCK WASHERS AND
5/8" BARREL NUTS IN PLACES WHERE
"STAKE A" IS NOTED.
TWIST STAKES INTO GROUND
AGAINST GROUND BOARDS WHERE
SHOWN. ATTACH TO FORT ASSEMBLY
USING 1/2" BOLTS, 8X15 LOCK
WASHERS, WASHERS AND 5/8"
BARREL NUTS IN ALL PLACES WHERE
"STAKE B" IS NOTED.
FINAL STEP
DOUBLE CHECK EVERY BOLT,
SCREW AND NUT FOR TIGHTNESS.
MAKE SURE EVERY BOARD IS
SECURE AND MAKE SURE THE
PLAY SET IS LEVEL.
ENJOY YOUR NEW PLAY SET!
NOTE:
FAILURE TO USE GROUND STAKES CAN
VOID WARRANTY & CAUSE INJURY!
STAKE A
STAKE B
STAKE A
STAKE A
STAKE A
STAKE A
STAKE B
STAKE B
STAKE B
STAKE B
BOLT WH
1
/4x1/2"
(4)
BOLT WH
1/4x1
(4)
WASHER
L
OCK EXT
8x15
(8)
WASHER
FLAT 9x18
(8)
NUT BARREL
WH 1/4x5/8
(8)
SCREW PWH
8x5/8
(2)
KC - METAL GROUND STAKE BROWN - A100178
(8)
SQ - "A" REVISION TAG - A100314
(1)
M13
SQ
STEP 33
ATTACH SQ I.D.TAG TO THE INSIDE OF M13
F
LOOR RAIL USING (2) 5/8" PWH SCREWS,
AS SHOWN.