THUNDER RIDGE Wooden Swing Set Model: # 36214 • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Manufacturer: Backyard Discovery 3001 North Rouse Pittsburg, KS 66762 1-800-856-4445 Register your new swing set on-line @ www.swingsetsonline.com (you will also find any updates on assembly instructions and information to order replacement parts) Features the fastening system.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto.
Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) Wood Chips 7' (2.13m) 10' (3.05m) 11' (3.35m) 10' (3.05m) Double-Shredded bark mulch 6' (1.83m) 10' (3.05m) 11' (3.35m) 7' (2.13m) Engineered Wood Fibers 6' (1.83m) 7' (2.13m) >12' (3.66m) 6' (1.83m) Fine Sand 5' (1.52m) 5' (1.
Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21.
Owner’s Manual Play Set Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment.
Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY 9 HANDBOOK X3.
Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the playset? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our swing sets. These tools are not included in the swing set purchase.
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 16'-1 1/4" 6'-0" 29'-8 1/2" 17'-8 1/2" 6'-0" Safe Play Zone General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use. A maximum of 120 lbs.
Parts Identification Wood Components (NOT TO SCALE) (1) E1 - TOWER LEG - W101743 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) E2 - TOWER LEG - W4L04861 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (2) E3 - MIDDLE POST - W101753 1 3/8"x3 3/8"x49 1/4" (36x86x1252) (2) E4 - PERGOLA POST - W101547 1 3/8"x3 3/8"x22 7/8" (36x86x580) (2) E5 - ROOF POST - W101546 1 3/8"x3 3/8"x18" (36x86x458) (1) E6 - TOWER LEG - W4L04866 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) E7 - TOWER LEG - W4L04867 1 3/8"x3 3/8"x89 1/2" (36x86x22
Parts Identification Wood Components (NOT TO SCALE) G4 - SWING BEAM RAIL - W101742 1"x5 1/4"x40 7/8" (24x134x1038) (1) (1) H1 - FLOOR RAIL - W4L04841 1"x3 3/8"x64 3/4" (24x86x1644) (1) H2 - BRACE BOARD - W101554 1"x3 3/8"x51 7/8" (24x86x1319) (7) H3 - PERGOLA RAIL - W101550 1"x3 3/8"x49 1/8" (24x86x1248) H5 - END FLOOR RAIL - W101736 1"x3 3/8"x40 7/8" (24x86x1038) (2) (3) H6 - FLOOR SUPPORT BOARD - W101749 1"x3 3/8"x40 7/8" (24x86x1038) (2) H7 - PERGOLA RAFTER - W4L04865 1"x3 3/8"x34" (24x86x8
Parts Identification Wood Components (NOT TO SCALE) (5) H77 - LEFT UPRIGHT - W100972 1"x3 3/8"x64 3/8" (24x86x1634) (1) (1) (1) H76 - LADDER RUNG - W100611 1"x3 3/8"x18 1/8" (24x86x460) H78 - RIGHT UPRIGHT - W100973 1"x3 3/8"x64 3/8" (24x86x1634) (1) H79 - END SUPPORT - W4L04855 1"x3 1/2"x42" (24x86x1072) (2) H81 - MONKEY BAR BRACE - W100993 1"x3 3/8"x53 1/4" (24x86x1352) H82 - MONKEY BAR GROUND BOARD - W100994 1"x3 3/8"x70 3/8" (24x86x1786) (4) (1) (2) (1) (1) J1 - FLOOR SUPPORT - W101037
Parts Identification Wood Components (NOT TO SCALE) (1) L1 - FRONT ARCHED WALL RAIL - W101751 5/8"x4 3/8"x64 3/4" (16x112x1644) L2 - BACK ARCHED WALL RAIL - W4L04862 5/8"x4 3/8"x64 3/4" (16x112x1644) (1) L3 - WALL RAIL - W101741 5/8"x4 3/8"x40 7/8" (16x112x1038) (2) (2) L5 - LEFT OUTER FLOOR BOARD - W101737 5/8"x4 3/8"x35 3/8" (16x112x900) (2) L6 - LEFT OUTER FLOOR BOARD - W101754 5/8"x4 3/8"x25" (16x112x636) (2) M2 - POST COVER BOARD - W101553 5/8"x3 3/8"x50 3/8" (16x86x1278) (2) M3 - WALL RA
Parts Identification Wood Components (NOT TO SCALE) (1) (1) (1) M11 - BACK WALL RAIL - W4L04864 5/8"x3 3/8"x13 1/2" (16x86x342) (2) M12 - WALL BOARD - W4L04837 5/8"x3 3/8"x45 7/8" (16x86x1165) (4) M13 - WALL BOARD - W4L04838 5/8"x3 3/8"x45 7/8" (16x86x1165) (2) M14 - WALL BOARD - W4L04839 5/8"x3 3/8"x45 7/8" (16x86x1165) (15) M15 - WALL BOARD - W4L04840 5/8"x3 3/8"x25 7/8" (16x86x656) (1) (1) M9 - WALL RAIL - W101750 5/8"x3 3/8"x4 3/4" (16x86x122) M16 - FILLER BOARD - W4L04842 5/8"x3 3/8"x64
Parts Identification Wood Components (NOT TO SCALE) (2) N6 - GABLE BOARD - W100593 5/8"x2 3/8"x13" (16x60x330) (4) N7 - GABLE BOARD - W100594 5/8"x2 3/8"x8" (16x60x202) (1) N8 - DOOR STOP - W4L04859 5/8"x2 3/8"x3 7/8" (16x60x100) (2) N9 - VERTICAL WALL TRIM - W4L04863 5/8"x2 3/8"x41 3/4" (16x60x1060) (1) (2) (1) O1 - WALL BOARD - W101755 5/8"x1 3/8"x27" (16x34x686) Q1 - BENCH SEAT - W4L04835 1"x4 3/8"x42 3/4" (24x112x1086) SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) (
Parts Identification Hardware (15) BOLT WH 5/16x1/2 - H100115 (9) BOLT WH 5/16x3/4 - H100222 (4) BOLT WH 5/16x5 3/4 - H100032 (1) BOLT WH 5/16x1 - H100008 (1) BOLT WH 5/16x4 1/2 - H100021 (3) BOLT WH 5/16x1 1/4 - H100009 (9) BOLT WH 5/16x3 1/4 - H100017 (20) BOLT WH 5/16x1 1/2 - H100010 (4) BOLT HEX 5/16x2-3/4 - H100047 (12) BOLT WH 5/16x1 3/4 - H100011 (4) BOLT HEX 5/16x1 1/4 - H100042 (13) BOLT WH 5/16x2 - H100012 (11) NUT BARREL WH 5/16x1 1/2 - H100006 (29) BOLT WH 5/16x2 1/4 - H100013 (19)
Parts Identification Hardware (208) SCREW PFH 8x1 1/8 - H100088 (59) LAG SCREW WH 5/16x2 - H100027 (31) SCREW PFH 8x1 1/2 - H100086 (136) SCREW PFH 8x1 3/4 - H100089 (11) LAG SCREW WH 5/16x2 1/2 - H100028 (39) SCREW PFH 8x2 - H100111 (9) SCREW PFH 8x2 1/2 - H100090 (4) LAG SCREW WH 1/4x1-1/2 - H100145 (58) SCREW PFH 8x3 - H100092 (4) BOLT WH 1/4x1 - H100137 (1) SCREW TAPPING 14x3/4 - H100083 (19) SCREW TAPPING 14x1-1/2 - H100109 (4) T-NUT 1/4 - H100072 (7) SCREW PWH 8x5/8 - H100128 (74) T-NUT 5/1
(4) WASHER SAFETY 17x30 - H100103 (28) WASHER LOCK EXT 12x19 - H100031 (24) WASHER FLAT 8x27 - H100105 (144) WASHER LOCK EXT 8x19 - H100030 (7) WASHER FLAT 9x18 - H100106 (4) WASHER LOCK EXT 6x15 - H100138 (4) WASHER SPLIT 5/16 - H100095 (7) WASHER LOCK INT 8x15 - H100108 (2) T-30 TORX WRENCH - H100114 (2) T-40 TORX BIT - A100042 (2) T-30 TORX BIT - H100147 (2) T-40 TORX WRENCH - A100041 (4) SWING HANGER QUICK LINK - H100099 Hardware (4) SWING HANGER QUICK LINK - H100097 Parts Identification
Parts Identification Accessories (2) SWING SEAT YELLOW - SMALL - A100171 (NOT TO SCALE) (1) SLIDE RAIL 10' BOTTOM LEFT GREEN - A100030 (1) SLIDE RAIL 10' BOTTOM RIGHT GREEN - A100031 (1) SLIDE RAIL 10' TOP LEFT GREEN - A100032 (1) SLIDE RAIL 10' TOP RIGHT GREEN - A100033 (1) GLIDER SEAT DARK GREEN - A100025 (2) CAPTAINS GLIDER ARM YELLOW - A100026 (1) BYD ID TAG (LARGE) 2011 WITH AGES - A100164
Parts Identification Accessories (NOT TO SCALE) (1) SLIDE BED 10' YELLOW - A100197 (8) QUICK LINK - A100069 (2) HAND GRIP GREEN 816 c/c - A100134 (2) L BRACKET 66x66x127 - A100140 (4) SLIDE SUPPORT TUBE 21.
Parts Identification Accessories (NOT TO SCALE) (7) METAL RUNG 559 - A100045 (1) KNOB KIT - A6P00020 (3) L BRACKET 2.
(1) SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) (2) GD - L BRACKET 66x66x127 - A100140 (1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 (1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 SWING BEAM ASSEMBLY STEP 1 WASHER FLAT 8x27 (4 PLCS) BOLT HEX 5/16x2-3/4 (2 PLCS) (3) BOLT WH 5/16x1 3/4 (2) (3) NUT BARREL WH 5/16x7/8 (4) WASHER FLAT 8x27 (2) NUT LOCK 5/16 NUT LOCK 5/16 (2 PLCS) SB74 BOLT WH 5/16x1 3/4 (3 PLCS) NUT BARREL WH 5/16x7/8 (3 PLCS) SWING BEAM EXT
(1) W71 - SWING BEAM SUPPORT - W102420 2"x3 3/8"x49 5/8" (50x86x1260) (2) (1) E77 - ANGLE BRACE - W100991 1 3/8"x3 3/8"x74 3/8" (36x86x1890) H79 - END SUPPORT - W100992 1"x3 1/2"x42" (24x86x1072) SWING BEAM ASSEMBLY STEP 2 BOLT WH 5/16x2 (2) W71 WASHER LOCK EXT 12x19 (1 PLC) (1) NUT BARREL WH 5/16x7/8 (1 PLC) BOLT WH 5/16x4 1/2 (2) E77 (3) NUT BARREL WH 5/16x7/8 (5) WASHER LOCK EXT 8x19 LAG SCREW WH 5/16x2 (3) WASHER LOCK EXT 12x19 BOLT WH 5/16x4 1/2 (1 PLC) WASHER LOCK EXT 8x19 (1 PLC)
SWING BEAM ASSEMBLY STEP 3 (2) BOLT WH 5/16x1 3/4 BOLT WH 5/16x2 1/2 (2) (2) NUT BARREL WH 5/16x7/8 (2) (2) NUT BARREL WH 5/16x1 1/2 WASHER LOCK EXT 8x19 (2) WASHER LOCK EXT 12x19 BOLT WH 5/16x1 3/4 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x2 1/2 (2 PLCS) NUT BARREL WH 5/16x7/8 (2 PLCS) NUT BARREL WH 5/16x1 1/2 (2 PLCS) W71 THESE BOLTS ARE REQUIRED FOR IMPROVED STRUCTUAL STRENGTH OF 'W71' SUPPORT AND MUST BE INSTALLED.
(4) EY - TUBING CAP GLIDER SUPPORT - A100067 (4) EX - GLIDER BUSHING BYD GREEN - A100066 (2) EW - GLIDER SUPPORT BYD GREEN - A100065 SWING BEAM ASSEMBLY STEP 4 (4) SWING HANGER QUICK LINK (2) BOLT WH 5/16x5 3/4 SB74 (6) BOLT WH 5/16x5 3/4 (2 PLCS) LAG SCREW WH 5/16x2 1/2 (2 PLCS) WASHER FLAT 8x27 (2) (6) NUT LOCK 5/16 GLIDER SUPPORT BYD GREEN (2 PLCS) WASHER FLAT 8x27 (2 PLCS) NUT LOCK 5/16 (2 PLCS) SWING HANGER QUICK LINK (4 PLCS) NUT LOCK 5/16 (4 PLCS) WASHER FLAT 8x27 (4 PLCS) GLIDER BUSHING
SWING BEAM ASSEMBLY STEP 5 (4) NUT LOCK 5/16 (4) WASHER FLAT 8x27 (4) WASHER SAFETY 17x30 SB74 (4) SWING HANGER QUICK LINK NUT LOCK 5/16 (4 PLCS) WASHER FLAT 8x27 (4 PLCS) WASHER SAFETY 17x30 (4 PLCS) SWING HANGER QUICK LINK (4 PLCS) 1. LOCK NUT MUST BE TIGHTENED UNTIL LOOP IS TIGHT AGAINST THE SAFETY WASHER. 2. SWING HANGER BOLT MUST BE ORIENTED AS SHOWN TO AVOID DAMAGE TO SWING HANGER BOLT.
(1) (1) KE - SLIDE BED 10' YELLOW - A100197 M70 - SLIDE BED SUPPORT - W100935 5/8"x3 3/8"x19 7/8" (16x86x505) 10 FOOT SLIDE ASSEMBLY PHASE 1 STEP 1 (3) BOLT WH 5/16x1/2 (3) WASHER LOCK EXT 12x19 ● ATTACH SLIDE BED SUPPORT TO SLIDE USING HARDWARE SHOWN. TOP (3) NUT BARREL WH 5/16x5/8 KE - SLIDE BED 10' YELLOW (SEE SLIDE ASSEMBLY INSTALLATION STEP FOR DECK MOUNTING HOLE DRILLING LOCATIONS).
(1) DS - SLIDE RAIL 10' BOTTOM RIGHT GREEN - A100031 (1) TR - SLIDE RAIL 10' TOP RIGHT GREEN - A100033 (1) DR - SLIDE RAIL 10' BOTTOM LEFT GREEN - A100030 (1) DT - SLIDE RAIL 10' TOP LEFT GREEN - A100032 10 FOOT SLIDE ASSEMBLY PHASE 2 STEP 2 (8) BOLT WH 5/16x3/4 (8) WASHER LOCK EXT 8x19 ● ASSEMBLE WITH HARDWARE AS SHOWN. ● REPEAT ON OTHER SIDE, MAKING A LEFT AND RIGHT ASSEMBLY.
(4) DW - SLIDE SUPPORT TUBE 21.34x505 - A100034 21.34 OD x 2.77 W x 505 10 FOOT SLIDE ASSEMBLY PHASE 3 STEP 3 ● PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL (FIG. 1). HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY DOWN IN THE SLIDE CAVITY. ● INSTALL THE (4) SLIDE SUPPORT TUBES INTO THEIR RESPECTIVE PILOT LOCATIONS (FIG. 2).
10 FOOT SLIDE ASSEMBLY PHASE 4 STEP 4 ● ONCE THE SLIDE BED, SUPPORT TUBES, AND SUPPORT BOARD ARE COMPLETELY IN THE CAVITY AND SUPPORT POCKET, SECURE USING 3" SCREWS AT EACH OF THE PILOT HOLE LOCATIONS AS SHOWN. ● REPEAT PROCESS FOR OPPOSITE SLIDE RAIL.
(1) H77 - LEFT UPRIGHT - W100972 1"x3 3/8"x64 3/8" (24x86x1634) (5) (1) H76 - LADDER RUNG - W100611 1"x3 3/8"x18 1/8" (24x86x460) H78 - RIGHT UPRIGHT - W100973 1"x3 3/8"x64 3/8" (24x86x1634) Notes • Assemble with hardware as shown. • Center rungs in rail grooves.
(2) HAND GRIP GREEN 816 c/c - A100134 Phase Notes • Assemble with hardware as shown.
(2) E74 - MONKEY BAR RAIL - W102918 1 3/8"x3 3/8"x77 1/8" (36x86x1959) (2) TZ - L BRACKET 2.5x38x50x55 - A100340 (2) QZ - TRIANGLE PLATE 100° 5 HOLE - A100294 5 FT. MONKEY BAR KIT STEP 1 (2) (2) L BRACKET 2.
(2) E97 - MONKEY BAR UPRIGHT - W4L04831 1 3/8"x3 3/8"x88 1/8" (36x86x2237) STEP 2 T-NUT 5/16 (4 PLCS) BOLT WH 5/16x1 1/2 (4 PLCS) E97 (4) BOLT WH 5/16x1 1/2 (4) T-NUT 5/16
(7) EC - METAL RUNG 559 - A100045 STEP 3 METAL RUNG 559 (3 PLCS) SCREW TAPPING 14x1-1/2 (6 PLCS) (14) SCREW TAPPING 14x1-1/2 SCREW TAPPING 14x1-1/2 (8 PLCS) METAL RUNG 559 (4 PLCS)
(1) H82 - MONKEY BAR GROUND BOARD - W100994 1"x3 3/8"x70 3/8" (24x86x1786) (2) H81 - MONKEY BAR BRACE - W100993 1"x3 3/8"x53 1/4" (24x86x1352) STEP 4 (4) BOLT WH 5/16x1 1/2 (4) LAG SCREW WH 5/16x2 (2) (4) NUT BARREL WH 5/16x7/8 (2) (2) (4) BOLT HEX 5/16x2-3/4 WASHER LOCK INT 8x15 WASHER LOCK EXT 12x19 (8) (2) T-NUT 5/16 WASHER LOCK EXT 8x19 WASHER FLAT 9x18 T-NUT 5/16 (2 PLCS) WASHER FLAT 9x18 (2 PLCS) WASHER LOCK INT 8x15 (2 PLCS) BOLT HEX 5/16x2-3/4 (2 PLCS) H81 NUT BARREL WH 5/16x
(2) EA - HAND GRIP YELLOW PLASTIC - A100043 STEP 5 HAND GRIP YELLOW PLASTIC (2 PLCS) (4) SCREW TAPPING 14x1-1/2 (4) WASHER LOCK INT 8x15 (4) WASHER FLAT 9x18 SCREW TAPPING 14x1-1/2 (4 PLCS) WASHER LOCK INT 8x15 (4 PLCS) WASHER FLAT 9x18 (4 PLCS)
(1) E1 - TOWER LEG - W101743 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) G3 - RIGHT GROUND BOARD - W101744 1"x5 1/4"x40 7/8" (24x134x1038) (1) E7 - TOWER LEG - W4L04867 (1) 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) G4 - SWING BEAM RAIL - W101742 1"x5 1/4"x40 7/8" (24x134x1038) (1) G2 - LEFT GROUND BOARD - W101552 (1) 1"x5 1/4"x64 5/8" (24x134x1640) (1) STEP 1 J2 - SAFETY RAIL - W4L04836 1"x2 3/8"x41 1/2" (24x60x1054) H5 - END FLOOR RAIL - W101736 1"x3 3/8"x40 7/8" (24x86x1038) L3 - WALL RAIL - W101741 5
(1) (1) E2 - TOWER LEG - W4L04861 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) E6 - TOWER LEG - W4L04866 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) (1) H5 - END FLOOR RAIL - W101736 1"x3 3/8"x40 7/8" (24x86x1038) M3 - WALL RAIL - W101747 5/8"x3 3/8"x40 7/8" (16x86x1038) (1) K3 - DECORATIVE WALL BOARD - W4L04845 5/8"x5 1/4"x40 7/8" (16x134x1038) G3 - RIGHT GROUND BOARD - W101744 1"x5 1/4"x40 7/8" (24x134x1038) (1) L3 - WALL RAIL - W101741 5/8"x4 3/8"x40 7/8" (16x112x1038) STEP 2 (6) BOLT WH 5/16x2 (2 P
(2) K1 - GROUND BOARD - W4L04832 5/8"x5 1/4"x84 5/8" (16x134x2150) STEP 3 (8) (8) WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 (4 PLCS) K1 K1 LAG SCREW WH 5/16x2 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19
(1) (1) H1 - FLOOR RAIL - W4L04841 1"x3 3/8"x64 3/4" (24x86x1644) (1) L1 - FRONT ARCHED WALL RAIL - W101751 5/8"x4 3/8"x64 3/4" (16x112x1644) K2 - DOUBLE ARCHED WALL BOARD - W4L04844 5/8"x5 1/4"x64 3/4" (16x134x1644) (1) M16 - FILLER BOARD - W4L04842 5/8"x3 3/8"x64 3/4" (16x86x1644) STEP 4 (12) (12) LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19 WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 (4 PLCS) L1 WASHER LOCK EXT 8x19 (2 PLCS) LAG SCREW WH 5/16x2 (2 PLCS) H1 M16 LAG SCREW WH 5/16x2 (2 P
(1) L2 - BACK ARCHED WALL RAIL - W4L04862 5/8"x4 3/8"x64 3/4" (16x112x1644) (1) H12 - FLOOR RAIL - W4L04860 1"x3 3/8"x64 3/4" (24x86x1644) STEP 5 (6) (6) WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 (4 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) LAG SCREW WH 5/16x2 (2 PLCS) H12 L2 LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19
(4) J1 - FLOOR SUPPORT - W101037 1"x2 3/8"x3" (24x60x76) STEP 6 FLUSH J1 (8) SCREW PFH 8x1 3/4 (2 PLCS) J1 J1 J1 SCREW PFH 8x1 3/4
(8) F71 - STANDARD ANGLE BRACE - W100689 1 3/8"x2 3/8"x13" (36x60x330) STEP 7 WASHER LOCK EXT 8x19 (1 PLC) BOLT WH 5/16x2 1/4 (1 PLC) (8) LAG SCREW WH 5/16x2 (8) T-NUT 5/16 (8) BOLT WH 5/16x2 1/4 (16) WASHER LOCK EXT 8x19 F71 WASHER LOCK EXT 8x19 (1 PLC) T-NUT 5/16 (1 PLC) BOLT WH 5/16x2 1/4 (1 PLC) F71 T-NUT 5/16 (1 PLC) This is the only T-Nut located on the outside of the fort.
(4) H13 - FLOOR SUPPORT BLOCK - W101757 1"x3 3/8"x3 3/8" (24x86x86) (2) E3 - MIDDLE POST - W101753 1 3/8"x3 3/8"x49 1/4" (36x86x1252) STEP 8 E3 WASHER LOCK EXT 8x19 (2 PLCS) LAG SCREW WH 5/16x2 (2 PLCS) (6) LAG SCREW WH 5/16x2 (2) (8) WASHER LOCK EXT 8x19 (2) H13 (2) BOLT WH 5/16x2 3/4 WASHER LOCK EXT 12x19 NUT BARREL WH 5/16x7/8 H13 E3 WASHER LOCK EXT 8x19 (1 PLC) WASHER LOCK EXT 12x19 (1 PLC) NUT BARREL WH 5/16x7/8 (1 PLC) LAG SCREW WH 5/16x2 (1 PLC) WASHER LOCK EXT 8x19 (1 PLC) H13 B
(3) H6 - FLOOR SUPPORT BOARD - W101749 1"x3 3/8"x40 7/8" (24x86x1038) STEP 9 (12) H6 H6 H6 SCREW PFH 8x2 (2 PLCS) FLUSH SCREW PFH 8x2
(2) FP1 - FLOOR PANEL - W2A01534 1 1/4" x 17" x 66 5/8" (32x432x1692) STEP 10 (50) FP1 FP1 SCREW PFH 8x1 3/4 (50 PLCS) FP1 .5 MM FP1 .
(2) L6 - LEFT OUTER FLOOR BOARD - W101754 5/8"x4 3/8"x25" (16x112x636) (2) L5 - LEFT OUTER FLOOR BOARD - W101737 5/8"x4 3/8"x35 3/8" (16x112x900) STEP 11 (36) L5 L6 L5 SCREW PFH 8x1 3/4 (36 PLCS) L6 FLUSH SCREW PFH 8x1 3/4
(1) M3 - WALL RAIL - W101747 5/8"x3 3/8"x40 7/8" (16x86x1038) (1) M4 - FRONT WALL RAIL - W101739 5/8"x3 3/8"x36" (16x86x914) (1) M9 - WALL RAIL - W101750 5/8"x3 3/8"x4 3/4" (16x86x122) STEP 12 (2) BOLT WH 5/16x2 (3) LAG SCREW WH 5/16x2 (2) T-NUT 5/16 (5) WASHER LOCK EXT 8x19 T-NUT 5/16 (2 PLCS) M4 M3 G WASHER LOCK EXT 8x19 (2 PLCS) M9 LAG SCREW WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19 (1 PLC) LAG SCREW WH 5/16x2 (1 PLC) WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x2 (2 PLCS)
(1) M3 - WALL RAIL - W101747 5/8"x3 3/8"x40 7/8" (16x86x1038) (1) M11 - BACK WALL RAIL - W4L04864 5/8"x3 3/8"x13 1/2" (16x86x342) (1) M8 - WALL RAIL - W101765 5/8"x3 3/8"x4 3/4" (16x86x122) STEP 13 (2) BOLT WH 5/16x2 (2) LAG SCREW WH 5/16x2 (2) T-NUT 5/16 (4) WASHER LOCK EXT 8x19 T-NUT 5/16 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) M3 M8 WASHER LOCK EXT 8x19 (1 PLC) M11 LAG SCREW WH 5/16x2 (1 PLC) WASHER LOCK EXT 8x19 (1 PLC) LAG SCREW WH 5/16x2 (1 PLC) BOLT WH 5/16x2 (2 PLCS)
(5) M7 - WALL BOARD - W101758 5/8"x3 3/8"x25 1/4" (16x86x640) STEP 14 (20) 2 7/8" (6 PLCS) SCREW PFH 8x1 1/8 (20 PLCS) 1 13/16" M7 SCREW PFH 8x1 1/8
(5) M7 - WALL BOARD - W101758 5/8"x3 3/8"x25 1/4" (16x86x640) STEP 15 (20) 2 7/8" (6 SPCS) SCREW PFH 8x1 1/8 (20 PLCS) 1 13/16" M7 SCREW PFH 8x1 1/8
(2) M5 - WALL BOARD - W101756 5/8"x3 3/8"x27" (16x86x686) (1) O1 - WALL BOARD - W101755 5/8"x1 3/8"x27" (16x34x686) (4) M7 - WALL BOARD - W101758 5/8"x3 3/8"x25 1/4" (16x86x640) STEP 16 (28) 2 5/16" (5 SPCS) 1 11/16" (2 SPCS) M7 SCREW PFH 8x1 1/8 (28 PLCS) 1 13/16" O1 M5 SCREW PFH 8x1 1/8
(1) M5 - WALL BOARD - W101756 5/8"x3 3/8"x27" (16x86x686) (2) M6 - HANDLE WALL BOARD - W101764 5/8"x3 3/8"x27" (16x86x686) (1) TZ - L BRACKET 2.
(2) HAND GRIP YELLOW PLASTIC - A100043 STEP 18 (4) (4) BOLT WH 1/4x1 (4) WASHER LOCK EXT 6x15 T-NUT 1/4 HAND GRIP YELLOW PLASTIC (1 PLC) WASHER LOCK EXT 6x15 (4 PLCS) BOLT WH 1/4x1 (4 PLCS) HAND GRIP YELLOW PLASTIC (1 PLC) T-NUT 1/4 (4 PLCS)
(2) E5 - ROOF POST - W101546 1 3/8"x3 3/8"x18" (36x86x458) STEP 19 WASHER LOCK EXT 8x19 (1 PLC) E5 BOLT WH 5/16x3 1/4 (1 PLC) (2) BOLT WH 5/16x3 1/4 (4) (2) SCREW PFH 8x2 1/2 (2 PLCS) T-NUT 5/16 (1 PLC) E5 PILOT HOLE TO THE OUTSIDE ON BOTH ROOF POSTS.
(2) E4 - PERGOLA POST - W101547 1 3/8"x3 3/8"x22 7/8" (36x86x580) STEP 20 E4 WASHER LOCK EXT 8x19 (1 PLC) BOLT WH 5/16x3 1/4 (1 PLC) (2) BOLT WH 5/16x3 1/4 (4) (2) SCREW PFH 8x2 1/2 WASHER LOCK EXT 8x19 (2) T-NUT 5/16 T-NUT 5/16 (1 PLC) SCREW PFH 8x2 1/2 (2 PLCS) E4 PILOT HOLES TO THE OUTSIDE FOR BOTH PERGOLA POSTS.
(2) N6 - GABLE BOARD - W100593 5/8"x2 3/8"x13" (16x60x330) (2) N3 - GABLE BOARD - W100590 5/8"x2 3/8"x31 1/2" (16x60x800) (2) (4) N7 - GABLE BOARD - W100594 5/8"x2 3/8"x8" (16x60x202) (4) L7 - GABLE MOON - W100572 5/8"x4 3/8"x13" (16x112x330) H8 - ROOF RAFTER - W4L04869 1"x3 3/8"x29 7/8" (24x86x758) STEP 21 REPEAT STEP 21 TO BUILD (2) GABLE ASSEMBLIES.
(2) GABLE ASSEMBLY STEP 22 GABLE ASSEMBLY WASHER LOCK EXT 8x19 (1 PLC) LAG SCREW WH 5/16x2 1/2 (1 PLC) (4) (4) LAG SCREW WH 5/16x2 1/2 WASHER LOCK EXT 8x19 GABLE ASSEMBLY
(2) RP1 - TOP ROOF PANEL - W2A01535 1" x 14 1/2" x 47 1/2" (27x369x1207) STEP 23 RP1 (8) SCREW PFH 8x1 3/4 (2 PLCS) RP1 SCREW PFH 8x1 3/4
(2) DP2 - ROOF PANEL - W2A01536 1" x 16 1/8" x 47 1/2" (27x410x1207) STEP 24 (8) RP2 SCREW PFH 8x1 3/4 (4 PLCS PER PANEL) RP2 T SCREW PFH 8x1 3/4
(2) H7 - PERGOLA RAFTER - W4L04865 1"x3 3/8"x34" (24x86x865) STEP 25 H7 (2) (2) LAG SCREW WH 5/16x2 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) H7 LAG SCREW WH 5/16x2 1/2 WASHER LOCK EXT 8x19
(7) H3 - PERGOLA RAIL - W101550 1"x3 3/8"x49 1/8" (24x86x1248) STEP 26 (16) SCREW PFH 8x3 SCREW PFH 8x3 (16 PLCS) H3 3 1/4" (6 SPCS) PLACE BACK OF FIRST RAIL AGAINST THE FACE OF THE PERGOLA POSTS.
(2) M12 - WALL BOARD - W4L04837 5/8"x3 3/8"x45 7/8" (16x86x1165) (2) M13 - WALL BOARD - W4L04838 5/8"x3 3/8"x45 7/8" (16x86x1165) (2) (7) M14 - WALL BOARD - W4L04839 5/8"x3 3/8"x45 7/8" (16x86x1165) M15 - WALL BOARD - W4L04840 5/8"x3 3/8"x25 7/8" (16x86x656) STEP 27 (38) M12 M14 M14 M13 M13 SCREW PFH 8x1 1/8 (38 PLCS) M15 3" M12 SCREW PFH 8x1 1/8
(1) M18 - HORIZONTAL WALL BOARD - W4L04846 5/8"x3 3/8"x27" (16x86x685) H11 - SHELF SUPPORT - W4L04847 (1) 1"x3 3/8"x3 3/4" (24x86x96) (1) K4 - SHELF BOARD - W4L04848 5/8"x5 1/4"x27" (16x134x685) STEP 28 H11 M18 (16) SCREW PFH 8x1 3/4 (2 PLCS) (2) SCREW PFH 8x1 3/4 (4) SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (4 PLCS) K4 SCREW PFH 8x1 1/8 (16 PLCS) SCREW PFH 8x1 1/8
(2) N9 - VERTICAL WALL TRIM - W4L04863 5/8"x2 3/8"x41 3/4" (16x60x1060) STEP 29 (8) SCREW PFH 8x1 1/8 N9 SCREW PFH 8x1 1/8 (4 PLCS PER BOARD) N9 FLUSH
(1) DP1 - DOOR ASSEMBLY - W2A01533 1 1/2" x 17" x 42 3/4" (38x430x1084) STEP 30 (11) PLASTIC HINGE SCREW PFH 8x1 1/8 (11 PLCS) DP1 SCREW PFH 8x1 1/8
(1) N8 - DOOR STOP - W4L04859 5/8"x2 3/8"x3 7/8" (16x60x100) STEP 31 (3) 4 1/4" 2" SCREW PFH 8x1 1/8 (3 PLCS) SCREW PFH 8x1 1/8
(1) KNOB KIT - A6P00020 STEP 32 FACE PLATE (1 PLC) LATCH (1 PLC) SCREW PFH 8x1/2 (1 PLC) DOOR KNOB (1 PLC) SCREW PFH 8x3/4 (2 PLCS)
(2) M13 - WALL BOARD - W4L04838 5/8"x3 3/8"x45 7/8" (16x86x1165) (8) M15 - WALL BOARD - W4L04840 5/8"x3 3/8"x25 7/8" (16x86x656) STEP 33 (24) M13 M13 SCREW PFH 8x1 1/8 (24 PLCS) M15 SCREW PFH 8x1 1/8
(1) M19 - HORIZONTAL WALL BOARD - W4L04858 5/8"x3 3/8"x30 7/8" (16x86x785) (1) H11 - SHELF SUPPORT - W4L04847 1"x3 3/8"x3 3/4" (24x86x96) (1) K5 - SHELF BOARD - W4L04849 5/8"x5 1/4"x30 7/8" (16x134x785) STEP 34 H11 M19 (18) SCREW PFH 8x1 3/4 (2 PLCS) (2) SCREW PFH 8x1 1/2 (5 PLCS) K5 SCREW PFH 8x1 1/8 (18 PLCS) SCREW PFH 8x1 3/4 (5) SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/8
(2) M2 - POST COVER BOARD - W101553 5/8"x3 3/8"x50 3/8" (16x86x1278) STEP 35 (10) SCREW PFH 8x1 3/4 SCREW PFH 8x1 3/4 (10 PLCS) M2 FLUSH M2
(1) H2 - BRACE BOARD - W101554 1"x3 3/8"x51 7/8" (24x86x1319) STEP 36 WASHER LOCK EXT 8x19 (1 PLC) (2) BOLT WH 5/16x1 3/4 BOLT WH 5/16x2 1/4 (1 PLC) (1) (3) T-NUT 5/16 (1 PLC) H2 T-NUT 5/16 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x1 3/4 (2 PLCS) WASHER LOCK EXT 8x19 (3) BOLT WH 5/16x2 1/4 T-NUT 5/16
(2) H10 - BENCH LEG - W4L04834 1"x3 3/8"x15" (24x86x380) STEP 37 (4) (4) WASHER LOCK EXT 8x19 (4) H10 H10 WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x1 1/2 (2 PLCS) BOLT WH 5/16x1 1/2 T-NUT 5/16 (2 PLCS) T-NUT 5/16
(2) H9 - BENCH SUPPORT - W4L04833 1"x3 3/8"x8 5/8" (24x86x220) STEP 38 (4) (4) WASHER LOCK EXT 8x19 (4) H9 T-NUT 5/16 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) BOLT WH 5/16x1 3/4 (4 PLCS) H9 BOLT WH 5/16x1 3/4 T-NUT 5/16
(2) Q1 - BENCH SEAT - W4L04835 1"x4 3/8"x42 3/4" (24x112x1086) STEP 39 (8) SCREW PFH 8x1 3/4 (8 PLCS) Q1 Q1 SCREW PFH 8x1 3/4
(1) SWING BEAM ASSEMBLY (1) BYD ID TAG (LARGE) 2011 WITH AGES - A100164 STEP 40 (4) SCREW PWH 8x5/8 (4) BOLT HEX 5/16x1 1/4 (4) WASHER SPLIT 5/16 (4) T-NUT 5/16 T-NUT 5/16 (4 PLCS) (4) WASHER FLAT 8x27 BOLT HEX 5/16x1 1/4 (4 PLCS) WASHER SPLIT 5/16 (4 PLCS) WASHER FLAT 8x27 (4 PLCS) SCREW PWH 8x5/8 (4 PLCS) BYD ID TAG (LARGE) 2011 WITH AGES (1 PLC)
(1) SLIDE ASSEMBLY STEP 41 USING A 10MM OR 3/8" DRILL BIT DRILL (3) HOLES AS SHOWN.
(1) LADDER ASSEMBLY STEP 42 (2) (2) LAG SCREW WH 5/16x2 1/2 WASHER LOCK EXT 8x19 To prevent board splitting, you must pre-drill each board with a 5/16" drill bit, before attaching.
(1) MONKEY BAR ASSEMBLY STEP 43 (2) BOLT WH 5/16x1/2 (2) T-NUT 5/16 T-NUT 5/16 (2 PLCS) BOLT WH 5/16x1/2 (2 PLCS)
(4) CHAIN GREEN 45" - A100092 (1) GLIDER SEAT DARK GREEN - A100025 (4) CHAIN GREEN 51.25" - A100068 (2) SWING SEAT YELLOW - SMALL - A100171 (2) CAPTAINS GLIDER ARM YELLOW - A100026 STEP 44 (8) QUICK LINK - A100069 CHAIN GREEN 45" (4 PLCS) (2) WASHER FLAT 8x27 (2) NUT LOCK 5/16 QUICK LINK (4 PLCS) WASHER FLAT 8x27 (2 PLCS) NUT LOCK 5/16 (2 PLCS) (2) BOLT WH 5/16x5 3/4 (2 PLCS) GLIDER SEAT DARK GREEN CAPTAINS GLIDER ARM YELLOW (2 PLCS) CHAIN GREEN 51.
(1) "A" REVISION TAG - A100314 STEP 45 (2) SCREW PWH 8x5/8 (2 PLCS) "A" REVISION TAG 3" SCREW PWH 8x5/8
(8) GROUND STAKE REBAR - A4M00527 Anchoring Instructions STEP 46 NOTE: (6) FAILURE TO USE GROUND STAKES CAN VOID WARRANTY & CAUSE INJURY! BOLT WH 5/16x1/2 NUT BARREL WH 5/16x5/8 (2) BOLT WH 5/16x1 1/4 (8) WASHER LOCK EXT 12x19 WASHER LOCK EXT 12x19 STAKE FIGURE 1 STAKE FIGURE 1 (6) NUT BARREL WH 5/16x5/8 NUT BARREL WH 5/16x7/8 BOLT WH 5/16x1 1/4 (2) NUT BARREL WH 5/16x7/8 GROUND STAKE REBAR BOLT WH 5/16x1/2 GROUND STAKE REBAR GROUND STAKE FIGURE 1 (2 PLCS) STAKE FIGURE 3 WASHER LOCK EX
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
