Instructions / Assembly

Step 1: Center in window opening and attach the
Bay Window Assembly to the lower edge of 'M9'
wall rail and the top edge 'L2' right wall rail using
Screws 'CK', as shown.
Phase Notes
• Assemble with hardware as shown.
Hardware needed:
• (6) CK - SCREW PFH 8x2 - H100111
Parts needed:
• (1) BAY WINDOW ASSEMBLY
Fort Assembly
Phase 15
M9
L2
CK
Note: It is vital that the fort
be level before and after
each phase of assembly.
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.