Instructions / Assembly

Swing Arm Assemblies
STEP 1
NOTE:
YOU WILL MAKE TWO ASSEMBLIES
IN THIS STEP.
ML - WR HAND GRIP - A100236
(4)
MG - BOOT (BLACK) - A100235
(2)
SHOULDER
BOLT
(M5x22MM)
(8)
BARREL NUT
(M5x13MM)
(8)
WASHER
LOCK INT
7x12
(16)
(2) XB - LOWER TUBE (GREEN) - A100406
(2) XC - 4' UPPER TUBE (GREEN) - A100407
SHOULDER BOLT (M5x22MM)
(8 PLCS)
WASHER LOCK INT 7x12
(16 PLCS)
BARREL NUT (M5x13MM)
(8 PLCS)
XB
XC
LOWER HAND GRIP
UPPER HAND GRIP
MG - BOOT (BLACK)
(1 PLC)
ML - WR HAND GRIP
(2 PLCS)
NOTE: SECURE TOP HOLE OF UPPER HAND
GRIP AND BOTTOM HOLE OF LOWER
HAND GRIP FIRST. NEXT, SLIDE UPPER
TUBE OVER LOWER TUBE UNTIL THE
PROPER HOLES ALIGN AND SECURE
WITH REMAINING SHOULDER BOLTS AND
BARREL NUTS, AS SHOWN.