Instructions / Assembly

SWING BEAM ASSEMBLY
STEP 2
INSERT (2) 2-1/2" BOLTS, LOCK WASHERS AND
1-1/2" BARREL NUTS INTO TOP EDGE OF W71
SWING BEAM SUPPORT, AS SHOWN.
ATTACH E77 ANGLE BRACES TO W71 SWING
BEAM SUPPORT USING 4- 1/2" BOLTS, LOCK
WASHERS AND 7/8" BARREL NUTS.
ATTACH H79 END SUPPORT TO E77 ANGLE
BRACES USING 2" BOLTS, LOCK WASHERS
AND 7/8" BARREL NUTS. NOW ATTACH H79
END SUPPORT TO W71 SWING BEAM SUPPORT
USING 2" LAG SCREWS AND LOCK WASHERS.
ATTACH H80 GROUND BOARD TO E77 ANGLE
BRACES USING 2" BOLTS, LOCK WASHERS
AND 7/8" BARREL NUTS.
BOLT WH
5/16x4-1/2
(1)
BOLT WH
5/16x2-1/2
(2)
BOLT WH
5/16x2
(4)
WASHER
LOCK EXT
8x19
(9)
WASHER
LOCK EXT
12x19
(7)
LAG SCREW
WH 5/16x2
(2)
NUT BARREL
WH 5/16x1-1/2
(2)
NUT BARREL
WH 5/16x7/8
(5)
W71 - SWING BEAM SUPPORT - W102349
2"x3 3/8"x47 3/8" (50x86x1204)
(1)
E77 - ANGLE BRACE - W100991
1 3/8"x3 3/8"x74 3/8" (36x86x1890)
(2)
H79 - END SUPPORT - W100992
1"x3 1/2"x42" (24x86x1072)
(1)
H80 - GROUND BOARD - W100990
1"x3 3/8"x87 3/8" (24x86x2218)
(1)
H79
E77
E77
W71
H80