CEDAR PLAY PARK WOODEN PLAY SET MODEL: 30115 Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 1-800-856-4445 •• •• •• •• Owner's Manual Frequently Asked Questions Assembly Instructions Warranty Information Register your new swing set on-line @ www.swingsetsonline.com (you will also find any updates on assembly instructions and information to order replacement parts) Features the fastening system.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto.
Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) Wood Chips 7' (2.13m) 10' (3.05m) 11' (3.35m) 10' (3.05m) Double-Shredded bark mulch 6' (1.83m) 10' (3.05m) 11' (3.35m) 7' (2.13m) Engineered Wood Fibers 6' (1.83m) 7' (2.13m) >12' (3.66m) 6' (1.83m) Fine Sand 5' (1.52m) 5' (1.
Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21.
Owner’s Manual Play Set Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment.
Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY 9 HANDBOOK X3.
Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the playset? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. Safe Play Zone 26'-7" [8.1 m] 12'- 1/4" [3.7 m] 6'-0" [1.8 m] 14'-6 1/8" [4.4 m] 6'-0" [1.8 m] General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use.
Parts Identification Wood Components (NOT TO SCALE) (2) E1 - PORCH UPRIGHT - W4L05555 1 3/8"x3 3/8"x33 3/8" (36x86x848) (2) E2 - PICNIC UPRIGHT - W103966 1 3/8"x3 3/8"x56 1/8" (36x86x1426) (1) E3 - FORT UPRIGHT - W4L05559 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) E4 - FORT UPRIGHT - W4L05561 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) E5 - FORT UPRIGHT - W2A01757 1 3/8"x3 3/8"x89 1/2" (36.
Parts Identification Wood Components (NOT TO SCALE) (2) G3 - GROUND BOARD - W103969 1"x5 1/4"x63 1/2" (24x134x1612) (1) G4 - GROUND BOARD - W103968 1"x5 1/4"x80 1/8" (24x134x2034) H1 - SHELF SUPPORT - W104004 1"x3 3/8"x7 7/8" (24x86x200) (2) H2 - SEAT SUPPORT - W104010 1"x3 3/8"x8 5/8" (24x86x218) (2) (6) H3 - ROOF SUPPORT - W4L05558 1"x3 3/8"x30 5/8" (24x86x778) (2) H4 - ROOF SUPPORT - W4L05554 1"x3 3/8"x30 5/8" (24x86x778) (1) H5 - SHELF BOARD - W104006 1"x3 3/8"x37 1/2" (24x86x952) (1) H6
Parts Identification Wood Components (NOT TO SCALE) (1) (1) (1) H12 - ARCH BOARD - W103989 1"x3 3/8"x45 3/8" (24x86x1154) H13 - DOUBLE ARCH BOARD - W103990 1"x3 3/8"x45 3/8" (24x86x1154) H14 - LEMONADE ROOF SUPPORT - W104019 1"x3 3/8"x45 3/8" (24x86x1154) (2) H15 - FLOOR RAIL - W103970 1"x3 3/8"x49 7/8" (24x86x1268) (2) H16 - SHELF SUPPORT - W4L05568 1"x3 3/8"x2" (24x86x50) (2) H73 - ROCK WALL RAIL - W100024 1"x3 3/8"x48 3/4" (24x86x1238) (1) (3) H79 - END SUPPORT - W100992 1"x3 1/2"x42" (24x
Parts Identification Wood Components (NOT TO SCALE) (2) M3 - WALL SLAT - W4L05562 5/8"x3 3/8"x40 1/4" (16x86x1022) (9) M4 - WALL SLAT - W4L05564 5/8"x3 3/8"x17 7/8" (16x86x454) (1) M5 - WALL RAIL - W103993 5/8"x3 3/8"x18 3/8" (16x86x468) (5) M6 - WALL SLAT - W4L05567 5/8"x3 3/8"x16" (16x86x406) M7 - WALL SLAT - W103997 (18) 5/8"x3 3/8"x25 3/4" (16x86x654) M8 - SERVING SHELF - W4L05565 5/8"x3 3/8"x35 3/8" (16x86x900) (1) (1) M9 - WALL SLAT - W104028 5/8"x3 3/8"x27 1/2" (16x86x700) M10 - ARCH W
Parts Identification Wood Components (NOT TO SCALE) (2) (1) M16 - WALL SLAT - W4L05569 5/8"x3 3/8"x38 7/8" (16x86x986) M18 - WALL RAIL - W4L05556 5/8"x3 3/8"x48" (16x86x1220) (1) M19 - WALL RAIL - W4L05557 5/8"x3 3/8"x48 5/8" (16x86x1236) (2) M20 - WALL RAIL - W103975 5/8"x3 3/8"x49 1/4" (16x86x1252) (1) M21 - FLOOR BOARD - W103985 5/8"x3 3/8"x49 7/8" (16x86x1268) (2) M22 - UPRIGHT - W104014 5/8"x3 3/8"x50 7/8" (16x86x1292) (6) M71 - ROCK BOARD - W100022 5/8"x3 3/8"x20 1/4" (16x86x514) (2) M
Parts Identification Wood Components (NOT TO SCALE) N4 - HORIZONTAL SUNBURST BOARD - W104025 5/8"x2 3/8"x38" (16x60x966) (3) (6) N91 - SUNBURST SPOKE - W104026 5/8"x2 3/8"x7 3/4" (16x60x198) (2) (2) (1) N92 - VERTICAL SUNBURST SPOKE - W104027 5/8"x2 3/8"x11 5/8" (16x60x296) (1) Q1 - SEAT BOARD - W104011 1"x4 3/8"x37 1/2" (24x112x952) (1) Q2 - SEAT BOARD - W104013 1"x4 3/8"x37 1/2" (24x112x952) SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) (1) (1) (3) W71 - SWING BEAM
Parts Identification Hardware (230) BR - SCREW PFH 8x1 1/8 - H100088 (22) BQ - SCREW PFH 8x1 1/4 - H100087 (44) CK - SCREW PFH 8x2 - H100111 (56) BT - SCREW PFH 8x2 1/2 - H100090 (144) AC - WASHER LOCK EXT 8x19 - H100030 (2) - T-40 TORX BIT - A100042 (2) - T-40 TORX WRENCH - A100041 (13) BS - SCREW PFH 8x1 3/4 - H100089 (2) - T-30 TORX WRENCH - H100114 (109) BP - SCREW PFH 8x1 1/2 - H100086 (2) - T-30 TORX BIT - H100147 (15) AD - WASHER LOCK EXT 12x19 - H100031 (4) BX - WASHER SPLIT 5/16 - H100
Parts Identification Hardware (13) CM - BOLT WH 5/16x1/2 - H100115 (7) YK - BOLT WH 5/16x3/4 - H100222 (1) F - BOLT WH 5/16x1 - H100008 (19) D - NUT BARREL WH 5/16x7/8 - H100005 (2) H - BOLT WH 5/16x1 1/2 - H100010 (12) J - BOLT WH 5/16x1 3/4 - H100011 (36) K - BOLT WH 5/16x2 - H100012 (2) C - NUT BARREL WH 5/16x1 1/2 - H100006 (23) Z - LAG SCREW WH 5/16x2 - H100027 (34) AA - LAG SCREW WH 5/16x2 1/2 - H100028 (46) L - BOLT WH 5/16x2 1/4 - H100013 (2) LC - LAG SCREW WH 1/4x1-1/2 - H100145 (2) M - BO
Parts Identification Hardware (2) AN - BOLT HEX 5/16x2-3/4 - H100047 (2) CY - SCREW PWH 8x5/8 - H100128 (1) QA - SCREW TAPPING 14x5/8 - H100164 (15) CJ - NUT LOCK 5/16 - H100110 (2) BE - T-NUT 1/4 - H100072 (100) BG - T-NUT 5/16 - H100074 (7) BF - T-NUT 3/8 - H100073 (4) BZ - SWING HANGER QUICK LINK - H100099 (4) AJ - BOLT HEX 5/16x1 1/4 - H100042 (4) BY - SWING HANGER QUICK LINK - H100097 (7) A - BOLT FA 3/8x1 1/2 - H100001
Parts Identification Accessories (NOT TO SCALE) (1) DN - GLIDER SEAT DARK GREEN - A100025 (2) DO - CAPTAINS GLIDER ARM YELLOW - A100026 (2) - SWING SEAT GREEN - A6P00054 (1) SQ - "A" REVISION TAG - A100314 (2) EM - SLIDE BED 8' YELLOW - A100056 (2) DQ - HAND GRIP GREEN PLASTIC - A100028 (1) - SLIDE RAIL 8' GREEN CENTER - A6P00082 (1) EL - SLIDE RAIL 8' GREEN LEFT - A100055 (1) EK - SLIDE RAIL 8' GREEN RIGHT - A100054
Parts Identification Accessories (NOT TO SCALE) (4) EY - TUBING CAP GLIDER SUPPORT - A100067 (2) EW - GLIDER SUPPORT BYD GREEN - A100065 (6) ER - CLIMBING ROCK GREEN SMALL - A100060 (2) GD - L BRACKET 66x66x127 - A100140 (4) EX - GLIDER BUSHING BYD GREEN - A100066 (1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 (1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 (1) TZ - L BRACKET 2.
(1) SB74 - SWING BEAM EXTENDED - W102419 2"x5 1/4"x89 1/2" (50x134x2274) (2) GD - L BRACKET 66x66x127 - A100140 (1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 (1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 4 FT GREEN EXTENDED SWING BEAM WITH GLIDER STEP 1 (3) ATTACH (2) GD BRACKETS TO SB74 SWING BEAM USING (2) 2-3/4" BOLTS, FLAT WASHERS AND 5/16" LOCK NUT, AS SHOWN. ATTACH TB AND TC SWING BEAM EXTENSION BRACKETS TO SB74 SWING BEAM USING (3) 1-3/4" BOLTS AND 7/8" BARREL NUTS, AS SHOWN.
(1) W71 - SWING BEAM SUPPORT - W102420 2"x3 3/8"x49 5/8" (50x86x1260) (1) (2) E77 - ANGLE BRACE - W100991 1 3/8"x3 3/8"x74 3/8" (36x86x1890) H80 - GROUND BOARD - W100990 1"x3 3/8"x87 3/8" (24x86x2218) (1) H79 - END SUPPORT - W100992 1"x3 1/2"x42" (24x86x1072) STEP 2 ATTACH H80 GROUND BOARD TO (2) E77 ANGLED SUPPORT BOARDS USING (2) 2" BOLTS, LOCK WASHERS AND 7/8" BARREL NUTS, AS SHOWN. ATTACH (2) E77 ANGLED SUPPORT BOARDS TO W71 SUPPORT USING 4- 1/2" BOLT, LOCK WASHERS AND 7/8" BARREL NUT, AS SHOWN.
STEP 3 INSERT W71 BOARD INTO TB AND TC BRACKET OPENING AND SECURE USING (2) 1-3/4" BOLTS AND 7/8" BARREL NUTS, AS SHOWN. INSERT (2) 2-1/2" BOLTS, LOCK WASHERS AND 1-1/2" BARREL NUTS INTO THE EDGE OF W71 BOARD, AS SHOWN. (2) (2) BOLT WH 5/16x1 3/4 (2) BOLT WH 5/16x2 1/2 NUT BARREL WH 5/16x7/8 NUT BARREL (2) WH 5/16x1 1/2 WASHER (2) LOCK EXT WASHER 8x19 (2) LOCK EXT 12x19 SB74 TB TC W71 THESE BOLTS ARE REQUIRED FOR IMPROVED STRUCTUAL STRENGHT OF W71 SUPPORT AND MUST BE INSTALLED.
(4) EY - TUBING CAP GLIDER SUPPORT - A100067 (4) EX - GLIDER BUSHING BYD GREEN - A100066 (2) EW - GLIDER SUPPORT BYD GREEN - A100065 STEP 4 ATTACH (2) EW GLIDER SUPPORT BARS TO SB74 SWING BEAM USING (2) 5-3/4" BOLTS, FLAT WASHERS AND 5/16" LOCK NUTS AND (2) 2-1/2" LAG SCREWS, AS SHOWN. INSERT (4) SWING HANGER QUICK LINKS INTO (4) EX BUSHINGS AND THEN ATTACH SWING HANGER QUICK LINKS TO EW GLIDER SUPPORTS USING (4) FLAT WASHERS AND 5/16" LOCK NUTS, AS SHOWN.
STEP 5 INSERT (4) SWING HANGER QUICK LINK INTO SB74 SWING BEAM USING (4) SAFETY WASHERS, FLAT WASHERS AND 5/16" LOCK NUTS, AS SHOWN. (4) NUT LOCK 5/16 (4) WASHER FLAT 8x27 (4) WASHER SAFETY 17x30 SB74 (4) SWING HANGER QUICK LINK 1. Lock nut must be tightened until loop is tight against the safety washer. 2. Swing hanger bolt must be oriented as shown to avoid damage to swing hanger bolt.
(6) M71 - ROCK BOARD - W100022 5/8"x3 3/8"x20 1/4" (16x86x514) (2) M72 - ROCK WALL SLAT - W100023 5/8"x3 3/8"x20 1/4" (16x86x514) (2) H73 - ROCK WALL RAIL - W100024 1"x3 3/8"x48 3/4" (24x86x1238) 4' Rock Ladder Phase 1 Phase Notes • Assemble slats to rails as shown. • Note oreintation of slats, be sure to arrange as shown. • See drawing below for slat spacing on rails. • Using slats as a guide, pre-drill top edges of rails with a 1/8" drill bit. Failure to pre-drill may result in board splitting.
TOP (1) (6) ER - CLIMBING ROCK GREEN SMALL - A100060 M102 - ATTACHMENT BOARD - W103690 5/8"x3 3/8"x20 1/4" (16x86x514) 37 4' Rock Ladder Phase Notes Phase 2 & 3 • Oreint top edge of rocks with top edge of slats. • Fasten rocks as shown.
(2) (2) M77 - SLIDE BRACE - W100544 5/8"x3 3/8"x17 1/4" (16x86x438) EM - SLIDE BED 8' YELLOW - A100056 SLIDE ASSEMBLY STEP 1 SLIDE BED 8' YELLOW (1 PLC) (6) BOLT WH 5/16x1/2 (6) T-NUT 5/16 T-NUT 5/16 (3 PLCS) BOLT WH 5/16x1/2 (3 PLCS) USE 'M77' SLIDE BRACE AS A TEMPLATE FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. BE SURE TO PLACE SLIDE BRACE UP 1/4" FROM BOTTOM EDGE OF SLIDE BED BEFORE MARKING HOLE PATTERN.
(1) EK - SLIDE RAIL 8' GREEN RIGHT - A100054 (1) (2) - SLIDE RAIL 8' GREEN CENTER - A6P00082 M78 - CENTER SLIDE BRACE - W100545 5/8"x3 3/8"x17 1/4" (16x86x438) SLIDE ASSEMBLY STEP 2 SLIDE RAIL 8' GREEN RIGHT (1 PLC) NOTE: MAKE CERTAIN SUPPORTS AND SLIDE BED ARE FULLY ENGAGED WITHIN CHANNEL OF SLIDE RAILS. M78 M78 SCREW PFH 8x2 1/2 (24 PLC) SLIDE RAIL 8' GREEN CENTER (1 PLC) TIP: A HELPER IS REQUIRED FOR THIS STEP.
(1) (2) EL - SLIDE RAIL 8' GREEN LEFT - A100055 M78 - CENTER SLIDE BRACE - W100545 5/8"x3 3/8"x17 1/4" (16x86x438) SLIDE ASSEMBLY STEP 3 (24) NOTE: MAKE CERTAIN SUPPORTS AND SLIDE BED ARE FULLY ENGAGED WITHIN CHANNEL OF SLIDE RAILS. SLIDE RAIL 8' GREEN LEFT (1 PLC) TIP: A HELPER IS REQUIRED FOR THIS STEP.
(1) (1) E4 - FORT UPRIGHT - W4L05561 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) G1 - GROUND BOARD - W103967 1"x5 1/4"x37 1/2" (24x134x952) (1) (1) E6 - FORT UPRIGHT - W103965 1 3/8"x3 3/8"x89 1/2" (36x86x2274) M12 - WALL RAIL - W104003 5/8"x3 3/8"x37 1/2" (16x86x952) M10 - ARCH WALL RAIL - W103987 5/8"x3 3/8"x37 1/2" (16x86x952) (1) (1) H15 - FLOOR RAIL - W103970 1"x3 3/8"x49 7/8" (24x86x1268) M20 - WALL RAIL - W103975 5/8"x3 3/8"x49 1/4" (16x86x1252) STEP 1 (8) BOLT WH 5/16x2 1/4 BOLT WH 5/16x2
(1) (1) E3 - FORT UPRIGHT - W4L05559 1 3/8"x3 3/8"x89 1/2" (36x86x2274) (1) E5 - FORT UPRIGHT - W2A01757 1 3/8"x3 3/8"x89 1/2" (36.
(2) G3 - GROUND BOARD - W103969 1"x5 1/4"x63 1/2" (24x134x1612) STEP 3 LAG SCREW (8) WH 5/16x2 1/2 (8) G3 G3 WASHER LOCK EXT 8x19 (8 PLCS) LAG SCREW WH 5/16x2 1/2 (8 PLCS) WASHER LOCK EXT 8x19
(1) H12 - ARCH BOARD - W103989 1"x3 3/8"x45 3/8" (24x86x1154) (1) (1) K1 - ARCH WALL RAIL - W4L05563 5/8"x5 1/4"x40 3/8" (16x134x1024) M13 - WALL RAIL - W4L05566 5/8"x3 3/8"x40 3/8" (16x86x1024) STEP 4 LAG SCREW (2)WH 5/16x2 1/2 LAG SCREW WH 5/16x2 1/2 (2 PLCS) (6) WASHER LOCK EXT 8x19 LAG SCREW WH 5/16x2 (8 PLCS) H12 (8) LAG SCREW WH 5/16x2 K1 (4 PLCS) LAG SCREW WH 5/16x2 (2 PLCS) M13 WASHER LOCK EXT 8x19
(2) H1 - SHELF SUPPORT - W104004 1"x3 3/8"x7 7/8" (24x86x200) (1) SQ - "A" REVISION TAG - A100314 STEP 5 SCREW PWH 8x5/8 (2 PLCS) H1 "A" REVISION TAG (2) (4) SCREW PFH 8x2 (4 PLCS) H1 SCREW PWH 8x5/8 SCREW PFH 8x2
(1) H13 - DOUBLE ARCH BOARD - W103990 1"x3 3/8"x45 3/8" (24x86x1154) (1) H8 - FLOOR RAIL - W103971 1"x3 3/8"x40 3/8" (24x86x1024) STEP 6 T-NUT 5/16 (2 PLCS) LAG SCREW (4) WH 5/16x2 1/2 H8 LAG SCREW WH 5/16x2 1/2 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) H13 H8 NOTE: HOLE LOCATION (4) WASHER LOCK EXT 8x19 (2) T-NUT 5/16
(9) M4 - WALL SLAT - W4L05564 5/8"x3 3/8"x17 7/8" (16x86x454) (2) M3 - WALL SLAT - W4L05562 5/8"x3 3/8"x40 1/4" (16x86x1022) STEP 7 M3 M3 (44) M4 3 7/8 in SCREW PFH 8x1 1/8 (44 PLCS) SCREW PFH 8x1 1/8
(1) M8 - SERVING SHELF - W4L05565 5/8"x3 3/8"x35 3/8" (16x86x900) (2) H16 - SHELF SUPPORT - W4L05568 1"x3 3/8"x2" (24x86x50) STEP 8 USING HOLES IN M13 AS GUIDE, DRILL THROUGH PICKETS ON BACK SIDE WITH A 3/16" BIT.
(2) F71 - STANDARD ANGLE BRACE - W100689 1 3/8"x2 3/8"x13" (36x60x330) (1) H11 - FLOOR SUPPORT - W103986 1"x3 3/8"x40 3/8" (24x86x1024) STEP 9 (2) BOLT WH 5/16x2 1/4 WASHER LOCK EXT 8x19 (2 PLCS) (2) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 BOLT WH 5/16x2 1/4 (2 PLCS) H11 F71 T-NUT 5/16 (2 PLCS) F71
(1) JOIST ASSEMBLY STEP 10 LAG SCREW ! 14 12 13 11 12 10 11 2 1 3 4 2 5 3 4 6 5 7 6 8 7 9 8 10 9 13 15 (2)WH 5/16x2 1/2 20 21 22 23 22 17 18 19 21 20 19 17 16 12 13 14 15 16 18 15 14 5 6 7 8 9 10 11 1 2 3 4 1 (2) 13 12 11 10 9 8 7 6 5 4 3 2 1 (4) LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19 LAG SCREW WH 5/16x2 1/2 (2 PLCS) LAG SCREW WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19 (4 PLCS)
(2) F71 - STANDARD ANGLE BRACE - W100689 1 3/8"x2 3/8"x13" (36x60x330) STEP 11 BOLT WH 5/16x2 1/4 (1 PLCS) WASHER LOCK EXT 8x19 (2) 11 9 12 10 13 11 14 12 15 13 (2 PLCS) BOLT WH 5/16x2 1/4 7 T-NUT 5/16 (1 PLCS) 2 3 1 4 2 5 3 6 4 5 8 6 9 7 10 8 ! (2) LAG SCREW WH 5/16x2 18 19 20 21 16 17 14 15 12 13 1 2 3 4 5 6 7 8 9 10 11 1 22 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 F71 LAG SCREW WH 5/16x2 (1 PLCS) BOLT WH 5/16x2 1/
(1) H10 - FLOOR SUPPORT - W103980 1"x3 3/8"x40 3/8" (24x86x1024) STEP 12 (4) SCREW PFH 8x2 1/2 H10 SCREW PFH 8x2 1/2 (4 PLCS)
(2) F3 - STANDARD ANGLE BRACE - W104018 1 3/8"x2 3/8"x39 3/8" (36x60x1000) STEP 13 LAG SCREW (2) WH 5/16x2 1/2 (2) F3 BOLT WH 5/16x2 1/4 (4) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 LAG SCREW WH 5/16x2 1/2 (2 PLCS) WASHER LOCK EXT 8x19 F3 (2 PLCS) T-NUT 5/16 (2 PLCS) BOLT WH 5/16x2 1/4 WASHER LOCK EXT 8x19 (2 PLCS) (2 PLCS)
(5) M6 - WALL SLAT - W4L05567 5/8"x3 3/8"x16" (16x86x406) STEP 14 M6 2 5/16" TYP SCREW PFH 8x1 1/8 (20 PLCS) (20) 3 7/8" SCREW PFH 8x1 1/8
(9) M2 - WALL SLAT - W4L05560 5/8"x3 3/8"x19 3/8" (16x86x492) STEP 15 (36) M2 3 7/8" SCREW PFH 8x1 1/8 (36 PLCS) SCREW PFH 8x1 1/8
(2) STEP 16 E1 - PORCH UPRIGHT - W4L05555 1 3/8"x3 3/8"x33 3/8" (36x86x848) BOLT WH 5/16x2 (4 PLCS) WASHER LOCK EXT 8x19 (4) (4 PLCS) T-NUT 5/16 (8 PLCS) E1 E1 WASHER LOCK EXT 8x19 (4 PLCS) BOLT WH 5/16x2 1/4 (4 PLCS) (4) BOLT WH 5/16x2 1/4 BOLT WH 5/16x2 (8) WASHER LOCK EXT 8x19 (8) T-NUT 5/16
(1) (1) H9 - FLOOR RAIL - W103972 1"x3 3/8"x40 3/8" (24x86x1024) M14 - ARCH WALL RAIL - W4L05682 5/8"x3 3/8"x40 3/8" (16x86x1024) STEP 17 LAG SCREW WH 5/16x2 1/2 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW (4) WH 5/16x2 1/2 (4) M14 H9 WASHER LOCK EXT 8x19
(1) (2) M21 - FLOOR BOARD - W103985 5/8"x3 3/8"x49 7/8" (16x86x1268) FP1 - FLOOR PANEL - W103984 1 1/4"x317"x50" (32x432x1268) STEP 18 (44) SCREW PFH 8x1 1/2 M21 FP1 SCREW PFH 8x1 1/2 (44 PLCS) FP1
(2) N1 - OUTER FLOOR BOARD - W103992 5/8"x2 3/8"x7 1/8" (16x60x180) (2) N3 - OUTER FLOOR BOARD - W103991 5/8"x2 3/8"x30 5/8" (16x60x778) STEP 19 (10) SCREW PFH 8x1 1/2 N3 SCREW PFH 8x1 1/2 N1 (10 PLCS) N3 N1
(4) M1 - SHORT WALL RAIL - W4L05683 5/8"x3 3/8"x4 3/4" (16x86x122) STEP 20 LAG SCREW WH 5/16x2 (4 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) M1 M1 M1 M1 (4) LAG SCREW WH 5/16x2 (4) WASHER LOCK EXT 8x19
(2) M16 - WALL SLAT - W4L05569 5/8"x3 3/8"x38 7/8" (16x86x986) STEP 21 M16 M16 (10) 1 3/4 SCREW PFH 8x1 1/8 (10 PLCS) SCREW PFH 8x1 1/8
(1) M18 - WALL RAIL - W4L05556 5/8"x3 3/8"x48" (16x86x1220) STEP 22 BOLT WH 5/16x2 (3) (3) WASHER LOCK EXT 8x19 (3) T-NUT 5/16 T-NUT 5/16 (3 PLCS) M18 WASHER LOCK EXT 8x19 (3 PLCS) BOLT WH 5/16x2 (3 PLCS)
(1) M19 - WALL RAIL - W4L05557 5/8"x3 3/8"x48 5/8" (16x86x1236) STEP 23 (3) T-NUT 5/16 (3 PLCS) BOLT WH 5/16x2 (3) WASHER LOCK EXT 8x19 (3) T-NUT 5/16 M19 WASHER LOCK EXT 8x19 (3 PLCS) BOLT WH 5/16x2 (3 PLCS)
(1) M7 - WALL SLAT - W103997 5/8"x3 3/8"x25 3/4" (16x86x654) STEP 24 (4) M7 SCREW PFH 8x1 1/8 (4 PLCS) SCREW PFH 8x1 1/8
(1) M7 - WALL SLAT - W103997 5/8"x3 3/8"x25 3/4" (16x86x654) STEP 25 (4) SCREW PFH 8x1 1/8 SCREW PFH 8x1 1/8 (4 PLCS)
(5) M7 - WALL SLAT - W103997 5/8"x3 3/8"x25 3/4" (16x86x654) STEP 26 M7 (20) 1 3/4" 2 3/8 2 1/4 (4 SPCS) SCREW PFH 8x1 1/8 (20 PLCS) SCREW PFH 8x1 1/8
(9) M7 - WALL SLAT - W103997 5/8"x3 3/8"x25 3/4" (16x86x654) STEP 27 M7 (36) 1 3/4 SCREW PFH 8x1 1/8 (36 PLCS) SCREW PFH 8x1 1/8
(1) M5 - WALL RAIL - W103993 5/8"x3 3/8"x18 3/8" (16x86x468) (1) M15 - ARCH WALL RAIL - W103979 5/8"x3 3/8"x40 3/8" (16x86x1024) STEP 28 LAG SCREW (2)WH 5/16x2 1/2 M15 (3) LAG SCREW WH 5/16x2 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (3 PLCS) LAG SCREW WH 5/16x2 (1 PLCS) (1) M5 LAG SCREW WH 5/16x2 WASHER LOCK EXT 8x19
(2) M7 - WALL SLAT - W103997 5/8"x3 3/8"x25 3/4" (16x86x654) (1) M9 - WALL SLAT - W104028 5/8"x3 3/8"x27 1/2" (16x86x700) (1) TZ - L BRACKET 2.
(2) H3 - ROOF SUPPORT - W4L05558 1"x3 3/8"x30 5/8" (24x86x778) STEP 30 T-NUT 5/16 (2 PLCS) (2) BOLT WH 5/16x1 3/4 (2) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 BOLT WH 5/16x1 3/4 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) H3 H3
(3) N4 - HORIZONTAL SUNBURST BOARD - W104025 5/8"x2 3/8"x38" (16x60x966) (6) N91 - SUNBURST SPOKE - W104026 5/8"x2 3/8"x7 3/4" (16x60x198) (3) (3) K80 - SUNBURST HALF MOON - W103694 5/8"x3 3/4"x10 3/8" (16x96x264) N92 - VERTICAL SUNBURST SPOKE - W104027 5/8"x2 3/8"x11 5/8" (16x60x296) STEP 31 YOU WILL MAKE THREE SUNBURST ASSEMBLIES IN THIS STEP.
(1) SUNBURST ASSEMBLY STEP 32 (6) SCREW PFH 8x1 1/8 (6 PLCS) SCREW PFH 8x1 1/8
(2) H3 - ROOF SUPPORT - W4L05558 1"x3 3/8"x30 5/8" (24x86x778) STEP 33 H3 (2) H3 BOLT WH 5/16x1 3/4 (2) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 T-NUT 5/16 (2 PLCS) BOLT WH 5/16x1 3/4 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS)
(1) SUNBURST ASSEMBLY STEP 34 (6) SCREW PFH 8x1 1/8 (6 PLCS) SCREW PFH 8x1 1/8
(1) RP5 - ROOF PANEL- W2A01755 1 3/8"x16 1/8"x43 7/8" (35X388X1116) STEP 35 RP5 (4) SCREW PFH 8x2 (4 PLCS) SCREW PFH 8x2
(1) RP5 - ROOF PANEL- W2A01755 1 3/8"x16 1/8"x43 7/8" (35X388X1116) STEP 36 (4) SCREW PFH 8x2 (4 PLCS) RP5 SCREW PFH 8x2
- ROOF PANEL - W2A01756 (1) RP6 1 3/8"x16 1/8"x43 7/8" (35x410x1116) STEP 37 (4) SCREW PFH 8x2 (4 PLCS) RP6 SCREW PFH 8x2
- ROOF PANEL - W2A01756 (1) RP6 1 3/8"x16 1/8"x43 7/8" (35x410x1116) STEP 38 (4) SCREW PFH 8x2 (4 PLCS) RP6 SCREW PFH 8x2
(2) E2 - PICNIC UPRIGHT - W103966 1 3/8"x3 3/8"x56 1/8" (36x86x1426) STEP 39 LAG SCREW (4) WH 5/16x2 1/2 E2 (4) WASHER LOCK EXT 8x19 E2 WASHER LOCK EXT 8x19 (4 PLCS) LAG SCREW WH 5/16x2 1/2 (4 PLCS)
(1) G1 - GROUND BOARD - W103967 1"x5 1/4"x37 1/2" (24x134x952) STEP 40 (4) BOLT WH 5/16x2 1/4 T-NUT 5/16 (4 PLCS) G1 WASHER LOCK EXT 8x19 (4 PLCS) BOLT WH 5/16x2 1/4 (4 PLCS) (4) WASHER LOCK EXT 8x19 (4) T-NUT 5/16
(2) H4 - ROOF SUPPORT - W4L05554 1"x3 3/8"x30 5/8" (24x86x778) STEP 41 (2) SCREW PFH 8x1 1/2 SCREW PFH 8x1 1/2 (2 PLCS) (2) H4 BOLT WH 5/16x2 1/4 (2) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 T-NUT 5/16 (2 PLCS) H4 WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x2 1/4 (2 PLCS)
(1) H14 - LEMONADE ROOF SUPPORT - W104019 1"x3 3/8"x45 3/8" (24x86x1154) STEP 42 WASHER LOCK EXT 8x19 (4 PLCS) T-NUT 5/16 (4 PLCS) BOLT WH 5/16x2 1/4 (4 PLCS) (4) H14 BOLT WH 5/16x2 1/4 (4) WASHER LOCK EXT 8x19 (4) T-NUT 5/16
(2) H3 - ROOF SUPPORT - W4L05558 1"x3 3/8"x30 5/8" (24x86x778) STEP 43 (2) BOLT WH 5/16x1 3/4 WASHER LOCK EXT 8x19 (2) T-NUT 5/16 (2 PLCS) (2) T-NUT 5/16 H3 H3 WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x1 3/4 (2 PLCS)
(1) SUNBURST ASSEMBLY STEP 44 SCREW PFH 8x1 1/8 (6 PLCS) (6) SCREW PFH 8x1 1/8
(2) M22 - UPRIGHT - W104014 5/8"x3 3/8"x50 7/8" (16x86x1292) STEP 45 (8) M22 SCREW PFH 8x1 1/2 (8 PLCS) M22 SCREW PFH 8x1 1/2
(1) RP1- ROOF PANEL- W2A01751 1 3/8"x15 1/4"x25 3/8" (35X388X646) STEP 46 SCREW PFH 8x1 1/4 (5 PLCS) (5) RP1 SCREW PFH 8x2 (2 PLCS) (2) SCREW PFH 8x1 1/4 SCREW PFH 8x2
(1) RP2- ROOF PANEL- W2A01752 1 3/8"x15 1/4"x25 3/8" (35X388X646) STEP 47 SCREW PFH 8x1 1/4 (5 PLCS) (5) RP2 (2) SCREW PFH 8x1 1/4 SCREW PFH 8x2 SCREW PFH 8x2 (2 PLCS)
(1) RP3- ROOF PANEL- W2A01753 1 3/8"x16 1/8"x25 3/8" (35X410X646) STEP 48 SCREW PFH 8x1 1/4 (5 PLCS) (5) (2) RP3 SCREW PFH 8x2 (2 PLCS) SCREW PFH 8x1 1/4 SCREW PFH 8x2
(1) RP4- ROOF PANEL- W2A01754 1 3/8"x16 1/8"x25 3/8" (35X410X646) STEP 49 (5) (2) RP4 SCREW PFH 8x1 1/4 SCREW PFH 8x2 SCREW PFH 8x1 1/4 (5 PLCS) SCREW PFH 8x2 (2 PLCS)
(2) F2 - SHELF BRACE - W104005 1 3/8"x2 3/8"x11 3/4" (36x60x300) STEP 50 (2) (2) BOLT WH 5/16x2 1/4 LAG SCREW WH 5/16x2 (4) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 WASHER LOCK EXT 8x19 F2 (4 PLCS) BOLT WH 5/16x2 1/4 (2 PLCS) T-NUT 5/16 (2 PLCS) F2 LAG SCREW WH 5/16x2 (2 PLCS)
(1) H5 - SHELF BOARD - W104006 1"x3 3/8"x37 1/2" (24x86x952) (1) (1) H6 - SHELF BOARD - W104007 1"x3 3/8"x37 1/2" (24x86x952) H7 - SHELF BOARD - W104008 1"x3 3/8"x37 1/2" (24x86x952) STEP 51 H5 H6 (12) H7 SCREW PFH 8x1 3/4 (12 PLCS) SCREW PFH 8x1 3/4
(2) H2 - SEAT SUPPORT - W104010 1"x3 3/8"x8 5/8" (24x86x218) STEP 52 LAG SCREW (2) WH 5/16x2 1/2 (2) H2 H2 LAG SCREW WH 5/16x2 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) WASHER LOCK EXT 8x19
(2) F1 - SEAT BRACE - W104012 1 3/8"x2 3/8"x9 1/2" (36x60x240) STEP 53 (2) (2) BOLT WH 5/16x2 1/4 LAG SCREW WH 5/16x2 (4) WASHER LOCK EXT 8x19 (2) T-NUT 5/16 F1 F1 T-NUT 5/16 (2 PLCS) WASHER LOCK EXT 8x19 (4 PLCS) BOLT WH 5/16x2 1/4 (2 PLCS) LAG SCREW WH 5/16x2 (2 PLCS)
(1) Q1 - SEAT BOARD - W104011 1"x4 3/8"x37 1/2" (24x112x952) (1) Q2 - SEAT BOARD - W104013 1"x4 3/8"x37 1/2" (24x112x952) STEP 54 Q1 (8) SCREW PFH 8x2 Q2 SCREW PFH 8x2 (8 PLCS)
(2) DQ - HAND GRIP GREEN PLASTIC - A100028 STEP 55 BOLT WH 1/4x1 (2 PLCS) WASHER LOCK EXT 6x15 (2 PLCS) (2) BOLT WH 1/4x1 LAG SCREW (2) WH 1/4x1-1/2 (4) WASHER LOCK EXT 6x15 (2 PLCS) LAG SCREW WH 1/4x1-1/2 (2 PLCS) WASHER LOCK EXT 6x15
(1) ROCK WALL LADDER ASSEMBLY STEP 56 (2) BOLT WH 5/16x1 1/2 (2) WASHER LOCK EXT 8x19 THIS RUNG MAY NEED TO BE TEMPORARILY REMOVED FOR INSTALLATION OF ROCK LADDER.
(1) SLIDE ASSEMBLY STEP 57 3" 7/16" 4 5/8" 3" 4 5/8" 3" 3" (6) BOLT WH 5/16x3/4 (6) T-NUT 5/16 1 7/16" •DRILLING PATTERN FOR SLIDE, USE A 7/16" DRILL BIT.
(1) SWING BEAM ASSEMBLY STEP 58 WASHER SPLIT 5/16 (4 PLCS) BOLT HEX 5/16x1 1/4 (4 PLCS) (4) BOLT HEX 5/16x1 1/4 WASHER FLAT 8x27 (4 PLCS) (4) WASHER SPLIT 5/16 (4) WASHER FLAT 8x27
(4) (2) EZ - CHAIN GREEN 51.
(4) (4) (2) DO - CAPTAINS GLIDER ARM YELLOW - A100026 JD - CHAIN GREEN 45" - A100092 FA - QUICK LINK - A100069 (1) DN - GLIDER SEAT DARK GREEN - A100025 STEP 60 TIGHTEN QUICK LINK (2) WASHER FLAT 8x27 (2) NUT LOCK 5/16 INSERT CHAIN INTO QUICK LINK (2) BOLT WH 5/16x5 3/4 NUT LOCK 5/16 (2 PLCS) WASHER FLAT 8x27 (2 PLCS) BOLT WH 5/16x5 3/4 (2 PLCS)
(6) - GROUND STAKE REBAR - A4M00527 Anchoring Instructions STEP 61 TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE LOCATIONS SHOWN. USING GROUND STAKES AS A GUIDE, DRILL 7/16" DIA HOLES.
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
