Instructions / Assembly

ManualsBrandsBackyard Discovery ManualsGazebosStonebridge 12 ft. x 9 ft. 6 in. Black All Metal Steel Gazebo with Slant Roof

Made in China

IINS-2306080-A-12x9.5 STONEBRIDGE GAZEBO-ENG 12-12-2022

Manufactured by:

Backyard Discovery

3305 Airport Drive, Pittsburg, KS 66762

800-856-4445

Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476

J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 08005678990

12x9.5 STONEBRIDGE GAZEBO

MODEL # : 2306080

Please visit www.backyarddiscovery.com

For the most up to date assembly manual, to register your product, or to order

replacement parts

Para obtener instrucciones en español, visite

www.backyarddiscovery.com

INSTALLATION

SERVICES

AVAILABLE!

See inside for details

EASY STEP-BY-STEP

3D INTERACTIVE INSTRUCTIONS

DOWNLOAD THE FREE APP

Summary of content (58 pages)

PAGE 1
Manufactured by: Backyard Discovery 3305 Airport Drive, Pittsburg, KS 66762 800-856-4445 Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476 J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 08005678990 12x9.5 STONEBRIDGE GAZEBO MODEL # : 2306080 Please visit www.backyarddiscovery.com For the most up to date assembly manual, to register your product, or to order replacement parts Para obtener instrucciones en español, visite www.backyarddiscovery.
PAGE 2
OWNER'S MANUAL - BASIC SETUP DIMENSIONS & ASSEMBLY NOTES It is critically important that you start with square and level footings, concrete pad or deck to attach your structure • Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step.
PAGE 3
OWNER'S MANUAL - ANCHORING LAYOUT 3
PAGE 4
PAGE 5
PAGE 6
PAGE 7
PAGE 8
PRE-ASSEMBLY STEP 1 - SORTING PARTS It is critical for ease of assembly that you take the time to sort and organize the parts and hardware. METAL PARTS: • • • • Organize metal parts by the three-digit, alpha-numeric number stamped on each part (ex. P01). If there are multiple parts with the same stamped number, stack those pieces together. Stamps can be found on the flat surface of the parts or on the end of the parts. Allow yourself plenty of room - the parts can take up a significant amount of space.
PAGE 9
PRE-ASSEMBLY STEP 2 - TOOLS REQUIRED Drill Attachments: Phillips Head Open End Wrench 7/16" 1/8", 3/16", 3/8" & 7/16" Drill Bits Cordless Drill or Electric Drill Claw Hammer 3/8" Drive Ratchet, 1/2" & 7/16" STD Sockets 1/2" & 7/16" Deep Sockets Phillips Screw Driver Rubber Mallet Optional Tape Measure Square Level 24" 9
PAGE 10
PRE-ASSEMBLY STEP 3 - CHOOSE YOUR ASSEMBLY METHOD There are several types of assembly instructions available to you. 1. Printed Assembly Manual included with your set 2. BILT APP - 3D interactive instructions 3.
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
PAGE 25
PAGE 26
PAGE 27
PAGE 28
PAGE 29
PAGE 30
PAGE 31
PAGE 32
PAGE 33
PAGE 34
PAGE 35
PAGE 36
PAGE 37
PAGE 38
PAGE 39
PAGE 40
PAGE 41
PAGE 42
PAGE 43
PAGE 44
PAGE 45
PAGE 46
PAGE 47
PAGE 48
PAGE 49
PAGE 50
PAGE 51
PAGE 52
PAGE 53
PAGE 54
PAGE 55
PAGE 56
PAGE 57
PAGE 58
ELECTRICAL ENCLOSURE 9205413 (x1) ELECTRICAL ENCLOSURE FOR ELECTRICAL ENCLOSURE INSTALLATION REFER TO ASSEMBLY INSTRUCTIONS THAT COME PACKAGED WITH THE ELECTRICAL ENCLOSURE KIT. INSTALL ON ANY POST THAT IS DESIRED. FOLLOW DIRECTIONS FOR PROPER INSTALLATION.