Instructions / Assembly

• Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step.
Using incorrect hardware may result in improper assembly
• Remember to double check for underground utilities and overhead electrical lines
Post mounts are provided with your structure which allows you to permanently install your structure to a
pre-existing or new wood or concrete surface. See Anchor Instructions for further details and recommendations.
• The hardware to attach the post mounts to the structure is included.
• The hardware to mount the structure permanently to a concrete surface is included.
• The hardware to mount the structure permanently to a wood deck is NOT included and will need to be purchased
separately. You must ensure there is ample structural support under the deck before permanently attaching.
OWNER'S MANUAL - BASIC SETUP DIMENSIONS & ASSEMBLY NOTES
It is critically important that you start with square and level footings, concrete pad or deck to
attach your structure
10'-9 3/4"
3.3m
10'- 1/4"
3.1m
3.9m
7'-5 1/2"
2.3m
12'-10 3/4"
3'-0"
0.9m
2.4m
7'-10 1/4"
3.7m
12'- 3/4"
6'-5"
2.0m
1.4m
4'-7 1/4"
2.0m
6'-7"
1.6m
5'-4 3/4"
2