Instructions / Assembly

ManualsBrandsBackyard Discovery ManualsGarden CenterAggie 4 ft. x 2 ft. 4 in. All Cedar Wooden Rectangular Cold Frame Planter Box with Temperature Activated Greenhouse Lid

Made in China

INS-2304130-A-AGGIE CEDAR COLD BOX-ENG 11-28-2023

Manufactured by:

Backyard Discovery

3305 Airport Drive, Pittsburg, KS

66762 800-856-4445

Please visit www.backyarddiscovery.com

For the most up to date assembly manual, to register your product, or to order

replacement parts

Para obtener instrucciones en español, visite

www.backyarddiscovery.com

EASY STEP-BY-STEP

3D INTERACTIVE INSTRUCTIONS

DOWNLOAD THE FREE APP

Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476

J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 08005678990

AGGIE CEDAR COLD BOX

MODEL # : 2304130

For Horticulture Use Only

Summary of content (32 pages)

PAGE 1
Manufactured by: Backyard Discovery 3305 Airport Drive, Pittsburg, KS 66762 800-856-4445 Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476 J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 08005678990 AGGIE CEDAR COLD BOX MODEL # : 2304130 For Horticulture Use Only Please visit www.backyarddiscovery.
PAGE 2
OWNER'S MANUAL - BASIC SETUP DIMENSIONS & ASSEMBLY NOTES 2'-4 3/4" 733mm • Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step. Using incorrect hardware may result in improper assembly.
PAGE 3
PAGE 4
H100406 | BOLT WH BLK (x70) | 1/4x1-1/2 H100630 | WASHER FLAT BLK (x72) | 8x19 H100653 | NUT LOCK BLK (x72) | 1/4 H100999 | BOT WH BLK (x2) | 1/4x2-1/2 H100385 | SCREW PFH BLK (x4) | 8x1 H100395 | SCREW PFH BLK (x28) | 8x3/4 H100764 (x1) SCREW SETTER H100202 | SCREW PWH BLK (x1) | 8x5/8 H100797 | SCREW PWH BLK (x5) | 8x1 H100392 | SCREW PWH BLK (x86) | 8x3/4 H100147 TORX BIT (x1) T-30 H100114 TORX WRENCH (x1) T-30 4 H101100 MAGNETIC DRIVER (x1)
PAGE 5
PAGE 6
PRE-ASSEMBLY STEP 1 - SORTING PARTS It is critical for ease of assembly that you take the time to sort and organize the wood and hardware. WOOD PARTS: • • • • Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01). If there are multiple boards with the same stamped number, stack those pieces together. Stamps can be found on the flat surface of the boards or on the end of the boards.
PAGE 7
PRE-ASSEMBLY STEP 2 - TOOLS REQUIRED Drill Attachments: Phillips Head Open End Wrenches 1/2" & 9/16" 1/8", 3/16", 3/8" & 7/16" Drill Bits 3/8" Drive Ratchet, 1/2" & 7/16" STD Sockets 1/2" & 7/16" Deep Sockets Phillips Screw Driver Cordless Drill or Electric Drill Rubber Mallet - Optional Claw Hammer Tape Measure Square Level 24" 7
PAGE 8
PRE-ASSEMBLY STEP 3 - CHOOSE YOUR ASSEMBLY METHOD There are several types of assembly instructions available to you. 1. Printed Assembly Manual included with your set 2. BILT APP - 3D interactive instructions 3.
PAGE 9
PAGE 10
PAGE 11
PAGE 12
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
TIP: CAN SQUEEZE OPENER TO RELEASE BRACKET FOR EASIER INSTALLATION.
PAGE 21
PAGE 22
PAGE 23
PAGE 24
PAGE 25
PAGE 26
PAGE 27
PAGE 28
PAGE 29
PAGE 30
PAGE 31
PAGE 32