NOTE: Your Children’s Safety Is Our #1 Concern Observe the following statements and wakings to reduce the likelihood of serious or fatal injury. Please review these safety rules regularly with your children. > Owner’s Manual Operating Instructions and Safety Warnings WARNING: BURN HAZARD « Pay special attention to plastic and metal surfaces as they may be hot enough to cause burns. + Always check the temperature of the product before letting your children play on it.
Positioning Your Play center The play center is designed to be installed on a level surface by an adult with an adult helper. Place in a flat area of your yard to minimize ground preparation. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing aay during heavy rains. Place the equipment not less than 6 ft (1.
> Owner’s Manual Please Read TI APPENDIX A The following information is from the United States Sheet for playground surfacing material; also see the following website for additional information: WWW.CPSC.gov X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION'S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK® X3.
D> Owner's Manual IT IS IMPORTANT TO CHECK AND TIGHTEN ALL HARDWARE AT THE BEGINNING AND DURING THE SEASON AS THEY MAY LOOSEN DUE TO WOOD EXPANSION AND CONTRACTION. At the beginning of each play season + Tighten all hardware. « Lubricate all metallic moving parts per manufacturer's instructions. «Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or missing.
3p Owner's Manual Your Backyard Discovery structure is designed and constructed of quality materials. As with all outdoor products it will weather and wear. To maximize the enjoyment, safety and life of your structure it is important that you properly maintain it. About Our Wood Backyard Discovery uses 100% Cedar (C. Lancelot) wood.
. > Owner’s Manual Protrusion Hazard Assembly Tips Incorrect If you see exposed protrusion. threads and your bolt protrudes beyond the T-Nut you may have over tightened the bolt or used incorrect hardware. If you've over tightened, remove the bolt and add washers to eliminate the Proper Hardware Assembly Bolt and T-Nut Assembly ‘Tap T-nut into the provided hole. Insert your bolt through the lock washer and insert into the provided hole opposite from the T-Nut. Turn clockwise to thread into T-nut.
23) Owner's Mania ASSEMBLY TIP: > Keep an eye out for these boxes which will contain helpful pictures and information making the assembly process as quick and painless as possible. Sorting Wood When removing the wood from the boxes we recommend arranging them by part number before you begin assembly. This will allow for faster assembly and easily identify any parts that may be missing or damaged.
D> Owner's Mania (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
Basic Setup Dimensions Place the set on level ground, not less than from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 /bs. per child is recommended for play activities designed for individual use. A maximum of 120 /bs. per child is recommended for play activities designed for multiple child use.
