Instructions / Assembly

ManualsBrandsBackyard Discovery ManualsPlayground SetsCanyon Creek All Cedar Wooden Outdoor Swing Set Playset with Rock Wall, Wave Slide, Web Swing, and Play Kitchen

Made in China

INS-2300347-A-CANYON CREEK - WHITE-ENG 01-18-24

Please visit www.backyarddiscovery.com

For the most up to date assembly manual, to register your set, or to order replacement parts

Para obtener instrucciones en español, visite www.backyarddiscovery.com

odel # 2300347

CANYON CREEK - WHITE

MANUFACTURED BY:

Backyard Discovery

3305 Airport Drive, Pittsburg, KS 66762

800-856-4445

Swing Set

Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476

J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 0800-567-8990

WARNING

Adult Assembly Required.

Not suitable for children under 36 months due to small parts.

FOR DOMESTIC USE ONLY. INTENDED FOR OUTDOOR USE.

The assembly manual must be retained

since it contains important information

Summary of content (87 pages)

PAGE 1
MANUFACTURED BY: Backyard Discovery 3305 Airport Drive, Pittsburg, KS 66762 800-856-4445 Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476 J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 0800-567-8990 CANYON CREEK - WHITE Swing Set Model # 2300347 The assembly manual must be retained since it contains important information WARNING Adult Assembly Required. Not suitable for children under 36 months due to small parts. FOR DOMESTIC USE ONLY.
PAGE 2
Owner's Manual - Basic Setup Dimensions & Assembly Notes Place the set on level ground, not less than 6'-7" [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. • While assembling unit, take time before and after each phase to make sure fort is level. If fort is not level, assembly will be difficult and improper assembly may result. Extra care must be taken to insure the fort is square.
PAGE 3
Owner's Manual - Parts Identification Wood Components (Not to Scale) A1 SWING BEAM EXTENDED - W4L18499 3 3/8"x5 1/4"x89 1/2" (86x134x2274) (x1) A2 (x1) D1 (x1) E1 (x4) SB 9" BLOCK - W4L19017 3 3/8"x5 1/4"x9" (86x134x228) SWING BEAM MOUNT - W4L19015 1 3/8"x5 1/4"x62 3/8" (36x134x1585) E2 DECK BRACE - W4L17821 1 3/8"x3 3/8"x12 1/4" (36x86x311) (x1) LEFT FRONT UPRIGHT - W4L17824 E4 RIGHT FRONT UPRIGHT - W4L17825 (x1) E5 1 3/8"x3 3/8"x51 3/4" (36x86x1314) 1 3/8"x3 3/8"x51 3/4" (36x86x1314)
PAGE 4
Owner's Manual - Parts Identification Wood Components (Not to Scale) E77 (x2) ANGLE BRACE - W4L18495 1 3/8"x3 3/8"x78" (36x86x1980) E79 (x1) F1 (x1) F03 (x1) END SUPPORT - W4L18496 1 1/2"x3 1/2"x44" (36x86x1120) F2 RIGHT BALCONY UPRIGHT - W4L17806 1 3/8"x2 3/8"x31 3/4" (36x60x805) SUPPORT BLOCK - W4L18516 F04 1 3/8"x2 3/8"x9 1/4" (36x60x234) (x1) G2 1"x5 1/4"x42 1/4" (24x134x1072) GROUND BOARD - W4L19005 1"x5 1/4"x40 1/2" (24x134x1030) G6 FRONT CENTER WALL RAIL - W4L19014 G7 1 3/8"x2 3/
PAGE 5
Owner's Manual - Parts Identification Wood Components (Not to Scale) G12 (x1) G13 (x1) H1 (x1) H5 (x1) 1"x5 1/4"x40 5/8" (24x134x1032) G15 ANGLED WALL RAIL - W4L19011 1"x5 1/4"x45 3/4" (24x134x1162) (x1) H2 TABLE SUPPORT - W4L18018 H06 BENCH BOARD - W4L18518 TABLE SUPPORT - W4L11147 1"x3 3/8"x22 3/8" (24x86x567) (x1) ATTACHMENT BOARD - W4L17639 1"x3 3/8"x18 1/4" (24x86x465) H08 (x2) (x2) BENCH BOARD - W4L18520 1"x3 3/8"x23" (24x86x583) H9 (x1) H78 (x1) J3 (x2) 1"x3 3/8"x23" (24
PAGE 6
Owner's Manual - Parts Identification Wood Components (Not to Scale) K12 (x1) K16 (x1) WALL RAIL - W4L19013 (x1) M11 (x15) M13 (x1) M75 (x4) M09 (x10) BENCH BOARD - W4L18529 M07 ROCK WALL BOARD - W4L18501 5/8"x3 3/8"x26 1/4" (16x86x667) Q1 (x1) Q3 Q5 5/8"x3 3/8"x19 7/8" (16x86x504) (x2) M73 REAR SUPPORT - W4L18504 (x1) 5/8"x3 3/8"x18 1/4" (16x86x465) M76 ROCK WALL BOARD - W4L18502 (x4) 5/8"x3 3/8"x26 1/4" (16x86x667) 1"x4 3/8"x40 5/8" (24x112x1032) (x2) Q4 ARCHED WALL RAIL -
PAGE 7
Owner's Manual - Parts Identification Wood Components (Not to Scale) SP71 (x1) T01 SWING BEAM SUPPORT - W4L18498 (x3) 3 3/8"x3 3/8"x49 1/2" (86x86x1256) T02 SUPPORT BOARD - W4L18508 T04 SUPPORT BOARD - W4L18515 (x1) (x1) T03 1"x1 3/8"x37 3/4" (24x34x959) (x2) E13 (x1) 1"x1 3/8"x37 5/8" (24x34x957) SUPPORT BOARD - W4L18509 1"x1 3/8"x18 3/4" (24x34x477) Y1 1"x1 3/8"x37 3/4" (24x34x958) SUPPORT BOARD - W4L18507 (x1) TOP BOARD - W4L17809 5/8"x3 3/4"x26 1/4" (16x94x667) RIGHT REAR UPRIGHT
PAGE 8
Owner's Manual - Parts Identification Wood Components (Not to Scale) WP01 (x1) WP03 (x1) WALL PANEL - W2A03778 1"x20 3/8"x37 3/4" (24x517x958) WP02 WALL PANEL - W2A03779 1"x16 7/8"x46 1/2" (24x430x1181) WP04 WALL PANEL - W2A03784 1"x16 7/8"x24 5/8" (24x430x627) (x1) WALL PANEL - W2A03786 1"x18 7/8"x11 3/4" (24x214x971) (x2) WP06 (x1) WP05 (x1) WALL PANEL - W2A03780 1"x18 7/8"x11 3/4" (24x479x300) WALL PANEL - W2A03785 1"x16 7/8"x46 1/2" (24x479x971) WP08 (x1) WP07 (x1) WALL PANEL - W2A03783
PAGE 9
Owner's Manual - Parts Identification Wood Components (Not to Scale) WP09 (x1) WP10 (x2) WALL PANEL - W2A03781 1"x16 7/8"x46 1/2" (24x479x1181) BENCH BACK ASSEMBLY - W2A037777 1 1/8"x11 7/8"x24 1/4" (27x303x615) WP11 WALL PANEL - W2A03788 1"x16 7/8"x46 1/2" (24x430x1181) WP12 WALL PANEL - W2A03789 1"x16 7/8"x46 1/2" (24x479x1181) (x1) (x1) 9
PAGE 10
Owner's Manual - Parts Identification Hardware Components H101170 BOLT HEX BLK (x12) 3/8x5 3/4 H100498 BOLT HEX - BLK (x4) H100459 BOLT WH BLK 5/16x1 1/2 (x6) H100468 BOLT WH BLK H100480 BOLT WH BLK (x2) (x10) 5/16x4 3/4 H100401 BOLT WH BLK 5/16x3-1/2 (x1) (x2) 5/16x3 (x8) 5/16x2-3/4 (x46) (x24) 5/16x2-1/4 (x2) (x10) H100192 NUT BARREL WH (x14) BLK 5/16x2 1/4x1 1/4 H100832 BOLT PTH BLK (x4) (with LOCTITE) 1/4x3/4 1/4x3/4 H100457 BOLT WH BLK 1/4x3/4 H100397 BOLT WH BLK 1/4x1-3/
PAGE 11
Owner's Manual - Parts Identification Hardware Components H100201 SCREW PFH BLK (x6) 8x2-1/2 H100206 LAG SCREW WH BLK (x2) 5/16x3 H100391 SCREW PFH BLK H101167 WASHER FLAT BLK (x12) (x24) 8x2 11x25 H100382 SCREW PFH BLK (x98) H100197 LAG SCREW WH BLK (x31) 8x1 3/4 5/16x2 1/2 H100200 SCREW PFH BLK (x276) H100105 WASHER FLAT H100458 LAG SCREW WH BLK (x16) (x3) 8x1 1/2 H100538 SCREW PFH SD 8x27 (x2) 5/16x2 8x1 1/2 H100387 SCREW PFH BLK (x81) 8x1 1/4 H100406 BOLT WH BLK (x6) H100347 SC
PAGE 12
Owner's Manual - Parts Identification Accessory Components (Not to Scale) A4M01047 L BRACKET (x2) 2.
PAGE 13
Owner's Manual - Parts Identification Accessory Components (Not to Scale) A6P00554 (x1) 8' BLOW MOLDED SLIDE - GREY A6P00537 (x1) CLIMBING ROPE A4M02256 (x4) A4M02676 (x4) A4M02171 (x6) BRACKET SWING HANGER A6P00618 (x1) A6P00596 (x1) CHAIN BLACK 51.
PAGE 14
PRE-ASSEMBLY STEP 1 - SORTING PARTS It is critical for ease of assembly that you take the time to sort and organize the wood and hardware. WOOD PARTS: • • • • Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01). If there are multiple boards with the same stamped number, stack those pieces together. Stamps can be found on the flat surface of the boards or on the end of the boards.
PAGE 15
PRE-ASSEMBLY STEP 2 - TOOLS REQUIRED Drill Attachments: Phillips Head Open End Wrenches 1/2" & 9/16" 1/8", 3/16", 3/8" & 7/16" Drill Bits 3/8" Drive Ratchet, 1/2" & 9/16" STD Sockets 1/2" & 9/16" Deep Sockets Phillips Screw Driver Cordless Drill or Electric Drill Claw Hammer Rubber Mallet - Optional Tape Measure Square Level 24" 15
PAGE 16
PRE-ASSEMBLY STEP 3 - CHOOSE YOUR ASSEMBLY METHOD There are several types of assembly instructions available to you. 1. Printed Assembly Manual included with your set 2. BILT APP - 3D interactive instructions 3.
PAGE 17
STEP 1 - LADDER ASSEMBLY QTY PART NUMBER 8 H77 H100391 LEFT UPRIGHT - W4L11173 (x1) 1"x3 3/8"x58" (24x86x1474) H76 LADDER RUNG - W4L18505 (x4) 1"x3 3/8"x17 1/4" (24x86x437) TIP: ALIGN PILOT HOLES H77 (x1) H76 (x4) 391 (x8) SCREW - 2" 17 DESCRIPTION SCREW PFH 8x2 BLK
PAGE 18
STEP 2 - LADDER ASSEMBLY QTY PART NUMBER 8 H78 H100391 RIGHT UPRIGHT - W4L11174 (x1) 1"x3 3/8"x58" (24x86x1474) TIP: ALIGN PILOT HOLES H78 (x1) 391 (x8) SCREW - 2" 18 DESCRIPTION SCREW PFH 8x2 BLK
PAGE 19
STEP 3 - LADDER ASSEMBLY QTY PART NUMBER 4 4 H5 H100200 H100391 DESCRIPTION SCREW PFH 8x1-1/2 BLK SCREW PFH 8x2 BLK ATTACHMENT BOARD - W4L17639 (x1) 1"x3 3/8"x18 1/4" (24x86x465) M73 REAR SUPPORT - W4L18504 (x1) 5/8"x3 3/8"x18 1/4" (16x86x465) TIP: ALIGN PILOT HOLES 391 (x4) H5 (x1) SCREW - 2" FLUSH 200 (x4) SCREW - 1 1/2" M73 (x1) 19
PAGE 20
STEP 1 - ROCK WALL ASSEMBLY QTY PART NUMBER 24 24 24 M75 H100473 H101111 DESCRIPTION T-NUT 1/4 BLK WASHER LOCK INT 8x15 BLK BOLT WH 1/4x3/4 BLK ROCK WALL BOARD - W4L18501 (x4) 5/8"x3 3/8"x26 1/4" (16x86x667) M76 ROCK WALL BOARD - W4L18502 (x4) H100398 A6P00592 (x12) GREY HC ROCK #1 5/8"x3 3/8"x26 1/4" (16x86x667) TIP: INSTALL T-NUTS IN WOOD FIRST FINGER GRIPS UPWARD 398 (x24) T-NUT - 1/4" 473 (x24) WASHER - 8x15" M75 (x4) 1111 (x24) BOLT WH - 3/4" M76 (x4) 592 (x12) GREY HC ROCK #1 FRO
PAGE 21
STEP 2 - ROCK WALL ASSEMBLY QTY PART NUMBER 64 H100200 DESCRIPTION SCREW PFH 8x1-1/2 BLK M75LA (x2) E72 (x2) M76DA (x4) RAIL - W4L17808 1 3/8"x3 3/8"x57 3/8" (36x86x1457) M75RA (x2) M74 (x7) ROCK WALL BOARD - W4L18500 5/8"x3 3/8"x26 1/4" (16x86x667) K01 (x1) ROCK WALL BOARD - W4L18503 5/8"x5 1/4"x26 1/4" (16x134x667) SIDE VIEW 1/8 in [4 mm] E72 (x2) 200 (x64) SCREW - 1 1/2" FLUSH (BOTH SIDES) FRONT VIEW M75LA M74 M76DA M74 M75RA M74 M76DA M74 M75LA M74 M76DA M74 M75RA M74 M76DA HOLE TOWARD B
PAGE 22
STEP 3 - ROCK WALL ASSEMBLY QTY PART NUMBER 2 Y1 (x1) H100200 DESCRIPTION SCREW PFH 8x1-1/2 BLK TOP BOARD - W4L17809 5/8"x3 3/4"x26 1/4" (16x94x667) SIDE VIEW 200 (x2) SCREW - 1 1/2" Y1 (x1) 1 in [24 mm] 22
PAGE 23
STEP 4 - ROCK WALL ASSEMBLY QTY PART NUMBER 4 2 H9 (x1) H100200 H100379 DESCRIPTION SCREW PFH 8x1-1/2 BLK T-NUT 5/16 BLK ATTACHMENT BOARD - W4L17814 1"x3 3/8"x26 1/4" (24x86x667) TIP: INSTALL T-NUTS IN WOOD FIRST SIDE VIEW H9 (x1) T-NUT 379 (x2) T-NUT - 5/16" 200 (x4) H9 (x1) SCREW - 1 1/2" T-NUTS TO THE INSIDE OF BOARD WHEN INSTALLED 23
PAGE 24
STEP 1 - SWING BEAM ASSEMBLY QTY 10 10 A1 (x1) A2 (x1) PART NUMBER H100192 H100416 DESCRIPTION NUT BARREL WH 5/16x7/8 BLK BOLT WH 5/16x3 BLK SWING BEAM EXTENDED - W4L18499 3 3/8"x5 1/4"x89 1/2" (86x134x2274) SB 9" BLOCK - W4L19017 3 3/8"x5 1/4"x9" (86x134x228) A4M00618 (x1) SWING BEAM SWING BEAM A4M00617 EXTENSION EXTENSION (x1) BRACKET-RIGHT BRACKET-LEFT A4M01679 (x2) 617 (x1) SWING BEAM EXTENSION BRACKET-LEFT 618 (x1) SWING BEAM EXTENSION BRACKET-RIGHT 192 (x10) NUT BARREL - 7/8" 416 (x10) B
PAGE 25
STEP 2 - SWING BEAM ASSEMBLY QTY 12 12 12 12 A4M02171 (x6) PART NUMBER H101166 H101167 H101168 H101170 SWING HANGER TIP: INSTALL T-NUTS IN WOOD FIRST 1168 (x12) T-NUT - 3/8" 2171 (x6) SWING HANGER 1167 (x12) WASHER - 11x25 1166 (x12) WASHER - 10x18 1170 (x12) BOLT - 5 3/4 25 DESCRIPTION WASHER LOCK INT 10x18 BLK WASHER FLAT 11x25 T-NUT 3/8 BLK BOLT HEX 3/8x5-3/4
PAGE 26
STEP 3 - SWING BEAM ASSEMBLY QTY PART NUMBER 4 H100202 DESCRIPTION SCREW PWH 8x5/8 BLK A100164 BYD ID TAG (LARGE) AGES 3-10 (x1) 164 (x1) 202 (x4) BYD ID TAG (LARGE) AGES 3-10 SCREW - 5/8" 26
PAGE 27
STEP 4 - SWING BEAM ASSEMBLY QTY PART NUMBER 6 4 2 E77 (x2) SP71 (x1) H100379 H100407 H100503 DESCRIPTION T-NUT 5/16 BLK BOLT WH 5/16x1 1/2 BLK BOLT WH 5/16x3-1/2 BLK ANGLE BRACE - W4L18495 1 3/8"x3 3/8"x78" (36x86x1980) SWING BEAM SUPPORT - W4L18498 A4M01782 3 3/8"x3 3/8"x49 1/2" (86x86x1256) (x1) A-FRAME BRACKET TIP: INSTALL T-NUTS IN WOOD FIRST SP71 (x1) 1782 (x1) A-FRAME BRACKET 379 (x6) T-NUT - 5/16" 503 (x2) BOLT - 3 1/2" 407 (x4) BOLT - 1 1/2" E77 (x1) E77 (x1) 27
PAGE 28
STEP 5 - SWING BEAM ASSEMBLY E79 (x1) QTY 2 8 END SUPPORT - W4L18496 4 8 1 1/2"x3 1/2"x44" (36x86x1120) 2 G12 (x1) PART NUMBER H100195 H100198 H100205 H100379 H100480 DESCRIPTION BOLT WH 5/16x2-3/4 BLK WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/4 BLK T-NUT 5/16 BLK BOLT WH 5/16x4 3/4 BLK GROUND BOARD - W4L18497 1"x5 1/4"x78 1/8" (24x134x1984) TIP: INSTALL T-NUTS IN WOOD FIRST E79 (x1) 195 (x2) BOLT - 2-3/4 G12 (x1) 480 (x2) BOLT - 4 3/4" 379 (x8) 205 (x4) BOLT - 2 1/4" 198 (x8) WASHER - 8x19
PAGE 29
STEP 6 - SWING BEAM ASSEMBLY QTY 2 2 PART NUMBER H100192 H100416 DESCRIPTION NUT BARREL WH 5/16x7/8 BLK BOLT WH 5/16x3 BLK FULLY TIGHTEN ALL 416 BOLTS NOW.
PAGE 30
STEP 1 - FORT ASSEMBLY E7 (x1) E9 (x1) RIGHT REAR UPRIGHT - W4L17831 1 3/8"x3 3/8"x43 1/2" (36x86x1104) PART NUMBER 4 8 H100195 H100198 12 4 H100379 H100457 DESCRIPTION BOLT WH 5/16x2-3/4 BLK WASHER LOCK EXT 8x19 BLK T-NUT 5/16 BLK BOLT WH 5/16x2 BLK RIGHT FRONT UPRIGHT - W4L17833 1 3/8"x3 3/8"x43 1/2" (36x86x1104) D1 (x1) QTY SWING BEAM MOUNT - W4L19015 K12 1 3/8"x5 1/4"x62 3/8" (36x134x1585) (x1) ARCHED WALL RAIL - W4L11143 5/8"x5 1/4"x40 5/8" (16x134x1032) TIP: INSTALL T-NUTS IN WOOD
PAGE 31
STEP 2 - FORT ASSEMBLY G5 (x1) E13 (x1) 6 6 6 RIGHT CENTER WALL RAIL - W4L19006 H100198 H100205 H100379 DESCRIPTION WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/4 BLK T-NUT 5/16 BLK 1"x5 1/4"x63 3/8" (24x134x1609) E4 (x1) QTY PART NUMBER RIGHT FRONT UPRIGHT - W4L17825 2 3/8 in [59 mm] 1 3/8"x3 3/8"x51 3/4" (36x86x1314) RIGHT REAR UPRIGHT ASSEMBLY - W2A03847 1 3/8"x3 3/8"x51 3/4" (36x86x1314) G2 (x1) 2 5/8 in [67 mm] GROUND BOARD - W4L19003 1"x5 1/4"x42 1/4" (24x134x1072) TIP: INSTALL T-NUTS
PAGE 32
STEP 3 - FORT ASSEMBLY QTY PART NUMBER 2 2 2 TIP: INSTALL T-NUTS IN WOOD FIRST STEP 1 ASSEMBLY 379 (x2) T-NUT - 5/16" 205 (x2) BOLT - 2 1/4" 198 (x2) WASHER - 8x19 STEP 2 ASSEMBLY 32 H100198 H100205 H100379 DESCRIPTION WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/4 BLK T-NUT 5/16 BLK
PAGE 33
STEP 4 - FORT ASSEMBLY E2 (x1) H100198 H100205 DESCRIPTION WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/4 BLK T-NUT 5/16 BLK H100379 1 3/8"x3 3/8"x51 3/4" (36x86x1314) LEFT FRONT UPRIGHT - W4L17824 E6 LEFT REAR UPRIGHT - W4L19001 E8 LEFT FRONT UPRIGHT - W4L19002 2 3/8 in [59 mm] 2 5/8 in [67 mm] 1 3/8"x3 3/8"x51 3/4" (36x86x1314) (x1) (x1) 12 12 12 LEFT REAR UPRIGHT - W4L17823 E3 (x1) QTY PART NUMBER G3 (x1) 1 3/8"x3 3/8"x43 1/2" (36x86x1104) 1 3/8"x3 3/8"x43 1/2" (36x86x1104) G8 (x1)
PAGE 34
STEP 5 - FORT ASSEMBLY G6 (x1) K4 (x1) QTY 3 12 2 8 FRONT CENTER WALL RAIL - W4L19014 1"x5 1/4"x61 3/4" (24x134x1570) GROUND BOARD - W4L19009 5/8"x5 1/4"x40 1/2" (16x134x1030) G15 (x1) PART NUMBER H100197 H100198 H100206 H100458 DESCRIPTION LAG SCREW WH 5/16x2-1/2 BLK WASHER LOCK EXT 8x19 BLK LAG SCREW WH 5/16x3 BLK LAG SCREW WH 5/16x2 BLK ANGLED WALL RAIL - W4L19012 1"x5 1/4"x45 3/4" (24x134x1162) 1 1/2 in [38 mm] M1 (x1) WALL RAIL - W4L19013 J1 5/8"x3 3/8"x40 1/2" (16x86x1030) (x1) PORCH
PAGE 35
STEP 6 - FORT ASSEMBLY QTY 8 G7 12 2 4 REAR CENTER WALL RAIL - W4L19007 1"x5 1/4"x61 3/4" (24x134x1570) (x1) G4 (x1) G14 (x1) PART NUMBER H100197 H100198 H100379 H100458 DESCRIPTION LAG SCREW WH 5/16x2-1/2 BLK WASHER LOCK EXT 8x19 BLK T-NUT 5/16 BLK LAG SCREW WH 5/16x2 BLK GROUND BOARD - W4L19005 1"x5 1/4"x40 1/2" (24x134x1030) ANGLED WALL RAIL - W4L19011 1"x5 1/4"x45 3/4" (24x134x1162) TIP: INSTALL T-NUTS IN WOOD FIRST 198 (x12) G14 (x1) WASHER - 8x19 458 (x4) LAG SCREW - 2" 197 (x8) G7
PAGE 36
STEP 7 - FORT ASSEMBLY QTY 4 3 Q6 (x1) ARCHED WALL RAIL - W4L19016 1"x4 3/8"x43 7/8" (24x112x1113) 1 1/2 in [38 mm] Q4 (x1) WALL RAIL - W4L17654 1"x4 3/8"x23 5/8" (24x112x600) A4M00710 L BRACKET (x1) BLACK 32x51 197 (x4) LAG SCREW - 2 1/2" 198 (x3) WASHER - 8x19 Q6 (x1) Q4 (x1) NOTE HOLES UP 1 1/2 in [38 mm] 710 (x1) L BRACKET BLACK 32x51 36 PART NUMBER H100197 H100198 DESCRIPTION LAG SCREW WH 5/16x2-1/2 BLK WASHER LOCK EXT 8x19 BLK
PAGE 37
STEP 8 - FORT ASSEMBLY QTY PART NUMBER 14 1/4 in [363 mm] F1 (x1) RIGHT BALCONY UPRIGHT - W4L17806 1 3/8"x2 3/8"x31 3/4" (36x60x805) F2 (x1) G11 (x1) 8 16 8 H100197 H100198 H100205 8 H100379 DESCRIPTION LAG SCREW WH 5/16x2-1/2 BLK WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/4 BLK T-NUT 5/16 BLK LEFT BALCONY UPRIGHT - W4L17807 1 3/8"x2 3/8"x31 3/4" (36x60x805) PILOT HOLES INWARD WHEN INSTALLED Q1 LEFT SIDE WALL BOARD - W4L19008 (x1) 1"x5 1/4"x42 1/2" (24x134x1080) TIP: INSTALL T-NUTS IN WOO
PAGE 38
STEP 9 - FORT ASSEMBLY QTY PART NUMBER 2 2 2 E1 (x2) 2 2 DECK BRACE - W4L17821 1 3/8"x3 3/8"x12 1/4" (36x86x311) TIP: INSTALL T-NUTS IN WOOD FIRST 198 (x2) WASHER - 8x19 205 (x2) BOLT - 2 1/4" 379 (x2) T-NUT - 5/16" 403 (x2) LAG SCREW - 1 1/2" 405 (x2) WASHER - 6x15 E1 (x2) 38 H100198 H100205 H100379 H100403 H100405 DESCRIPTION WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/4 BLK T-NUT 5/16 BLK LAG SCREW WH 1/4x1-1/2 BLK WASHER LOCK EXT 6x15 BLK
PAGE 39
STEP 10 - FORT ASSEMBLY J10 (x2) G9 (x1) QTY 2 2 4 PORCH GROUND BOARD - W4L17650 2 1"x2 3/8"x21 1/8" (24x60x537) LEFT BALCONY WALL RAIL - W4L17648 1"x5 1/4"x20 3/4" (24x134x528) Q5 (x1) PART NUMBER H100192 H100199 H100382 H100396 WALL RAIL - W4L17655 1"x4 3/8"x20 7/8" (24x112x529) 396 (x2) BOLT - 1/2" 192 (x2) NUT BARREL - 7/8" 199 (x2) WASHER - 12x19 Q5 (x1) G9 (x1) FLUSH 382 (x4) SCREW - 1 3/4" J10 (x2) 39 DESCRIPTION NUT BARREL WH 5/16x7/8 BLK WASHER LOCK EXT 12x19 BLK SCREW PFH 8x1
PAGE 40
STEP 11 - FORT ASSEMBLY QTY PART NUMBER E5 RIGHT FRONT BALCONY UPRIGHT - W4L17826 (x1) 1 3/8"x3 3/8"x80 3/4" (36x86x2052) E11 RIGHT FRONT BALCONY UPRIGHT - W4L17827 (x1) 2 10 8 10 H100195 H100198 H100205 H100379 DESCRIPTION BOLT WH 5/16x2-3/4 BLK WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/4 BLK T-NUT 5/16 BLK 1 3/8"x3 3/8"x80 3/4" (36x86x2052) TIP: INSTALL T-NUTS IN WOOD FIRST 198 (x10) WASHER - 8x19 195 (x2) 379 (x10) BOLT - 2-3/4 T-NUT - 5/16" 205 (x8) BOLT - 2 1/4" PILOT HOLES THIS SID
PAGE 41
STEP 12 - FORT ASSEMBLY Q3 (x1) QTY PART NUMBER 8 10 H100197 H100198 2 H100458 G10 WASHER LOCK EXT 8x19 BLK LAG SCREW WH 5/16x2 BLK ARCHED WALL RAIL - W4L17653 1"x4 3/8"x40 5/8" (24x112x1032) PILOT HOLES INWARD WHEN INSTALLED J2 (x1) DESCRIPTION LAG SCREW WH 5/16x2-1/2 BLK (x1) FRONT BALCONY WALL RAIL - W4L17649 1"x5 1/4"x40 5/8" (24x134x1032) Q3 (x1) G10 (x1) 198 (x10) WASHER - 8x19 197 (x8) LAG SCREW - 2 1/2" 458 (x2) LAG SCREW - 2" J2 (x1) 41 PORCH GROUND BOARD - W4L11129 1"x2 3/8"x4
PAGE 42
STEP 13 - FORT ASSEMBLY QTY PART NUMBER 2 2 2 E1 (x2) 2 2 DECK BRACE - W4L17821 1 3/8"x3 3/8"x12 1/4" (36x86x311) TIP: INSTALL T-NUTS IN WOOD FIRST 198 (x2) WASHER - 8x19 205 (x2) BOLT - 2 1/4" 379 (x2) T-NUT - 5/16" 403 (x2) LAG SCREW - 1 1/2" 405 (x2) E1 (x2) WASHER - 6x15 42 H100198 H100205 H100379 H100403 H100405 DESCRIPTION WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/4 BLK T-NUT 5/16 BLK LAG SCREW WH 1/4x1-1/2 BLK WASHER LOCK EXT 6x15 BLK
PAGE 43
STEP 14 - FORT ASSEMBLY QTY PART NUMBER 4 6 F06 (x1) T01 (x2) H100201 H100382 FLOOR JOIST - W4L18510 1 3/8"x2"x40 1/2" (36x50x1030) SUPPORT BOARD - W4L18507 1"x1 3/8"x37 5/8" (24x34x957) F06 T01 5/8 in [16 mm] T01 2 in [50 mm] SIDE VIEW T01 (x1) 201 (x4) SCREW - 2 1/2" F06 (x1) T01 (x1) 382 (x6) SCREW - 1 3/4" 43 DESCRIPTION SCREW PFH 8x2-1/2 BLK SCREW PFH 8x1 3/4 BLK
PAGE 44
STEP 15 - FORT ASSEMBLY J09 (x1) T03 (x2) QTY PART NUMBER 2 2 4 FLOOR JOIST - W4L18527 2 1 1 1"x2 3/8"x20 1/4" (24x60x515) SUPPORT BOARD - W4L18509 1"x1 3/8"x18 3/4" (24x34x477) A4M01047 L BRACKET (x2) 2.5x38x55x55 TIP: INSTALL T-NUTS IN WOOD FIRST 2 in [50 mm] SIDE VIEW T03 (x2) 382 (x4) SCREW - 1 3/4" 398 (x2) T-NUT - 1/4" 201 (x2) SCREW - 2 1/2" J09 (x1) 399 (x1) NUT BARREL - 7/8 401 (x1) 1047 (x2) L BRACKET 2.
PAGE 45
STEP 16 - FORT ASSEMBLY QTY PART NUMBER 56 M11 FLOOR BOARD - W4L18522 (x10) 5/8"x3 3/8"x40 5/8" (16x86x1031) M12 FLOOR BOARD - W4L18528 (x2) H100200 DESCRIPTION SCREW PFH 8x1-1/2 BLK 5/8"x3 1/4"x40 5/8" (16x82x1031) TIP: PLACE BOARDS EVENLY BEFORE INSERTING SCREWS M12 (x1) M11 (x10) M12 (x1) 200 (x56) SCREW - 1 1/2" 45
PAGE 46
STEP 17 - FORT ASSEMBLY QTY PART NUMBER 28 M10 FLOOR BOARD - W4L18513 (x1) 5/8"x3 3/8"x40 5/8" (16x86x1031) M11 FLOOR BOARD - W4L18522 (x5) 5/8"x3 3/8"x40 5/8" (16x86x1031) TIP: PLACE BOARDS EVENLY BEFORE INSERTING SCREWS 200 (x28) SCREW - 1 1/2" M11 (x5) M10 (x1) 46 H100200 DESCRIPTION SCREW PFH 8x1-1/2 BLK
PAGE 47
STEP 18 - FORT ASSEMBLY QTY PART NUMBER 6 T01 SUPPORT BOARD - W4L18507 (x1) 1"x1 3/8"x37 5/8" (24x34x957) T02 SUPPORT BOARD - W4L18508 (x1) H100382 DESCRIPTION SCREW PFH 8x1 3/4 BLK 1"x1 3/8"x37 3/4" (24x34x959) 2 in [50 mm] T01 1 1/2 in [38 mm] G9 G5 INSIDE VIEW 2 in [50 mm] T02 G5 G9 INSIDE VIEW G5 T02 (x1) T01 (x1) 382 (x6) SCREW - 1 3/4" G9 47 1 1/8 in [30 mm]
PAGE 48
STEP 19 - FORT ASSEMBLY QTY PART NUMBER 44 M08 (x1) FLOOR BOARD - W4L18526 5/8"x3 1/4"x19 7/8" (16x82x504) M09 (x10) FLOOR BOARD - W4L18521 5/8"x3 3/8"x19 7/8" (16x86x504) H100200 M13 (x1) DESCRIPTION SCREW PFH 8x1-1/2 BLK FLOOR BOARD - W4L18525 5/8"x3 1/4"x19 7/8" (16x82x504) TIP: PLACE BOARDS EVENLY BEFORE INSERTING SCREWS M08 (x1) M09 (x10) M13 (x1) TOP VIEW 200 (x44) SCREW - 1 1/2" 48
PAGE 49
STEP 20 - FORT ASSEMBLY QTY 6 6 6 WP01 (x1) PART NUMBER H100398 H100405 H100406 DESCRIPTION T-NUT 1/4 BLK WASHER LOCK EXT 6x15 BLK BOLT WH 1/4x1 1/2 BLK WALL PANEL - W2A03778 1"x20 3/8"x37 3/4" (24x517x958) WP01 INSIDE VIEW 3 7/8 in [100 mm] 398 (x6) T-NUT - 1/4" 405 (x6) WASHER - 6x15 NOTE HOLE LOCATIONS 406 (x6) BOLT - 1 1/2" WP1 (x1) FRONT WALL PANEL 49
PAGE 50
STEP 21 - FORT ASSEMBLY QTY PART NUMBER 3 T04 (x1) SUPPORT BOARD - W4L18515 1"x1 3/8"x37 3/4" (24x34x958) T04 (x1) 387 (x3) SCREW - 1 1/4" 50 H100387 DESCRIPTION SCREW PFH 8x1-1/4 BLK
PAGE 51
STEP 22 - FORT ASSEMBLY QTY PART NUMBER 4 1 1/8 in [29 mm] J6 (x1) 7/8 in [23 mm] SUPPORT BLOCK - W4L17817 1"x2 3/8"x6 1/4" (24x60x160) 7/8 in [23 mm] J11 (x1) H100387 DESCRIPTION SCREW PFH 8x1-1/4 BLK 1 1/8 in [29 mm] SUPPORT BLOCK - W4L17818 1"x2 3/8"x6 1/4" (24x60x160) TIP: ALIGN PILOT HOLES IN WALL PANEL TO PILOT HOLES IN (J) BOARDS.
PAGE 52
STEP 23 - FORT ASSEMBLY QTY PART NUMBER 1 1 1 H1 (x1) TABLE SUPPORT - W4L11147 1"x3 3/8"x22 3/8" (24x86x567) J7 (x1) H100195 H100198 H100379 DESCRIPTION BOLT WH 5/16x2-3/4 BLK WASHER LOCK EXT 8x19 BLK T-NUT 5/16 BLK SUPPORT BLOCK - W4L11158 1"x2 3/8"x3 3/8" (24x60x86) TIP: INSTALL T-NUTS IN WOOD FIRST H1 (x1) 379 (x1) T-NUT - 5/16" J7 (x1) 198 (x1) WASHER - 8x19 52 195 (x1) BOLT - 2-3/4
PAGE 53
STEP 24 - FORT ASSEMBLY QTY PART NUMBER 42 K17 (x2) FLOOR BOARD - W4L18523 5/8"x5 1/4"x21 1/8" (16x134x537) L05 (x1) FLOOR BOARD - W4L18524 5/8"x4 1/8"x19 1/4" (16x104x488) M04 (x8) H100200 DESCRIPTION SCREW PFH 8x1-1/2 BLK FLOOR BOARD - W4L18506 5/8"x3 3/8"x21 1/8" (16x86x537) TIP: PLACE BOARDS EVENLY BEFORE INSERTING SCREWS 200 (x42) SCREW - 1 1/2" K17 (x1) L05 (x1) M04 (x8) K17 (x1) 53
PAGE 54
STEP 25 - FORT ASSEMBLY QTY PART NUMBER 4 2 J3 (x2) 2 4 BENCH SUPPORT - W4L18017 1"x2 3/8"x9" (24x60x230) J5 SUPPORT BLOCK - W4L18022 1"x2 3/8"x2 7/8" (24x60x72) (x2) F5 (x2) 2 2 2 ANGLE BRACE - W4L17822 H100198 H100205 H100379 H100382 H100405 H100458 H100487 DESCRIPTION WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x2-1/4 BLK T-NUT 5/16 BLK SCREW PFH 8x1 3/4 BLK WASHER LOCK EXT 6x15 BLK LAG SCREW WH 5/16x2 BLK LAG SCREW WH 1/4x2 BLK 1 3/8"x2 3/8"x9 1/2" (36x60x240) TIP: INSTALL T-NUTS IN WOOD FIRST
PAGE 55
STEP 26 - FORT ASSEMBLY QTY PART NUMBER 22 H06 (x2) BENCH BOARD - W4L18518 1"x3 3/8"x23" (24x86x583) H08 (x2) H07 (x2) H100382 DESCRIPTION SCREW PFH 8x1 3/4 BLK BENCH BOARD - W4L18519 1"x2 3/8"x23" (24x60x583) BENCH BOARD - W4L18520 1"x3 3/8"x23" (24x86x583) TIP: ALIGN PILOT HOLES BEFORE INSERTING SCREWS 382 (x22) SCREW - 1 3/4" H06 (x1) H07 (x1) H08 (x1) H06 (x1) H07 (x1) H08 (x1) 55
PAGE 56
STEP 27 - FORT ASSEMBLY H2 (x1) TABLE SUPPORT - W4L18018 1"x3 3/8"x11 5/8" (24x86x295) K16 (x1) TABLE BOARD - W4L18530 5/8"x5 1/4"x23" (16x134x583) TIP: INSTALL T-NUTS IN WOOD FIRST. ALIGN PILOT HOLES.
PAGE 57
STEP 28 - FORT ASSEMBLY QTY 8 WP02 (x1) WP11 WALL PANEL - W2A03779 1"x16 7/8"x46 1/2" (24x430x1181) (x1) PART NUMBER H100382 DESCRIPTION SCREW PFH 8x1 3/4 BLK WALL PANEL - W2A03788 1"x16 7/8"x46 1/2" (24x430x1181) F06 3 7/8 in [100 mm] WP11 WP02 INSIDE VIEW FLUSH TOP OF PANELS TO BOTTOM OF (F06) WP11 (x1) WP02 (x1) 382 (x8) SCREW - 1 3/4" 57
PAGE 58
STEP 29 - FORT ASSEMBLY F03 (x1) WP10 (x1) QTY SUPPORT BLOCK - W4L18516 1 3/8"x2 3/8"x9 1/4" (36x60x234) 1 4 3 4 3 PART NUMBER H100195 H100198 H100200 H100379 H100457 DESCRIPTION BOLT WH 5/16x2-3/4 BLK WASHER LOCK EXT 8x19 BLK SCREW PFH 8x1-1/2 BLK T-NUT 5/16 BLK BOLT WH 5/16x2 BLK BENCH BACK ASSEMBLY - W2A037777 1 1/8"x11 7/8"x24 1/4" (27x303x615) TIP: INSTALL T-NUTS IN WOOD FIRST 379 (x4) T-NUT - 5/16" 457 (x3) BOLT - 2" 198 (x4) WASHER - 8x19 WP10 (x1) 200 (x1) SCREW - 1 1/2" F03 (x1) TIP:
PAGE 59
STEP 30 - FORT ASSEMBLY QTY PART NUMBER 4 WP12 (x1) H100382 DESCRIPTION SCREW PFH 8x1 3/4 BLK WALL PANEL - W2A03789 1"x16 7/8"x46 1/2" (24x479x1181) F06 WP12 3 7/8 in [100 mm] F06 WP12 (x1) 382 (x4) SCREW - 1 3/4" 59 INSIDE VIEW
PAGE 60
STEP 31 - FORT ASSEMBLY F04 (x1) WP10 (x1) QTY SUPPORT BLOCK - W4L18517 1 3/8"x2 3/8"x9 1/4" (36x60x234) 1 4 3 4 3 PART NUMBER H100195 H100198 H100200 H100379 H100457 DESCRIPTION BOLT WH 5/16x2-3/4 BLK WASHER LOCK EXT 8x19 BLK SCREW PFH 8x1-1/2 BLK T-NUT 5/16 BLK BOLT WH 5/16x2 BLK BENCH BACK ASSEMBLY - W2A037777 1 1/8"x11 7/8"x24 1/4" (27x303x615) TIP: INSTALL T-NUTS IN WOOD FIRST 379 (x4) T-NUT - 5/16" 457 (x3) BOLT - 2" 198 (x4) WASHER - 8x19 WP10 (x1) 200 (x1) SCREW - 1 1/2" F04 (x1) TIP:
PAGE 61
STEP 32 - FORT ASSEMBLY QTY PART NUMBER 14 M06 COUNTER TOP - W4L18511 (x1) 5/8"x3 3/8"x37 5/8" (16x86x957) M07 COUNTER TOP - W4L18512 (x2) 5/8"x3 3/8"x38 5/8" (16x86x981) TIP: ALIGN PILOT HOLES 200 (x14) SCREW - 1 1/2" M07 (x2) M06 (x1) 61 H100200 DESCRIPTION SCREW PFH 8x1-1/2 BLK
PAGE 62
STEP 33 - FORT ASSEMBLY QTY PART NUMBER 4 WP09 (x1) WALL PANEL - W2A03781 1"x16 7/8"x46 1/2" (24x479x1181) WP09 3 7/8 in [100 mm] INSIDE VIEW G4 WP09 (x1) 382 (x4) SCREW - 1 3/4" G4 62 H100382 DESCRIPTION SCREW PFH 8x1 3/4 BLK
PAGE 63
STEP 34 - FORT ASSEMBLY QTY PART NUMBER 2 2 A6P00024 (x1) FAUCET KIT H100538 H100544 DESCRIPTION SCREW PFH 8x1 1/2 SD SCREW PWH 8x5/8 SD A6P00032 SURFACE (x1) MOUNT BASIN 5/8 in [15 mm] 3 in [75 mm] 3/4 in [19 mm] INSIDE VIEW 538 (x2) SCREW - 1 1/2" 544 (x2) SCREW - 5/8" 032 (x1) SURFACE MOUNT BASIN 024 (x1) FAUCET KIT 63
PAGE 64
STEP 35 - FORT ASSEMBLY QTY PART NUMBER 4 H100544 A6P00282 BBQ GRILL (x1) 14 3/8 in [366 mm] 282 (x1) BBQ GRILL 544 (x4) SCREW - 5/8" 64 INSIDE VIEW DESCRIPTION SCREW PWH 8x5/8 SD
PAGE 65
STEP 36 - FORT ASSEMBLY QTY PART NUMBER 2 2 H100198 H100378 DESCRIPTION WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x1 3/4 BLK LADDER ASSEMBLY (x1) 198 (x2) WASHER - 8x19 378 (x2) BOLT - 1 3/4" LADDER ASSEMBLY 65
PAGE 66
STEP 37 - FORT ASSEMBLY QTY PART NUMBER 4 4 12 8 Q2 (x2) H100198 H100378 H100379 H100468 DESCRIPTION WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x1 3/4 BLK T-NUT 5/16 BLK BOLT WH 5/16x1 BLK A4M00855 L BRACKET (x2) 32x51x82 GROUND BOARD - W4L17640 1"x4 3/8"x24 3/8" (24x112x620) TIP: INSTALL T-NUTS IN WOOD FIRST 855 (x2) L BRACKET 468 (x8) BOLT - 1" 379 (x12) T-NUT - 5/16" Q2 (x2) 378 (x4) BOLT - 1 3/4" 66 198 (x4) WASHER - 8x19
PAGE 67
STEP 38 - FORT ASSEMBLY QTY PART NUMBER 3 1 1 1 WP07 (x1) WALL PANEL - W2A03783 1"x16 7/8"x46 1/2" (24x476x971) TIP: INSTALL T-NUTS IN WOOD FIRST 382 (x3) SCREW - 1 3/4" WP07 (x1) 026 (x1) BOLT - 1-3/4" 405 (x1) WASHER - 6x15 398 (x1) T-NUT - 1/4" 67 H100382 H100398 H100405 H101026 DESCRIPTION SCREW PFH 8x1-3/4 BLK T-NUT 1/4 BLK WASHER LOCK EXT 6x15 BLK BOLT WH 1/4x1-3/4 BLK
PAGE 68
STEP 39 - FORT ASSEMBLY QTY PART NUMBER 4 4 2 7/8 in [73 mm] BOTTOM SIDE WP04 (x2) WALL PANEL - W2A03784 1"x16 7/8"x24 5/8" (24x430x627) 2 7/8 in [73 mm] BOTTOM SIDE 391 (x4) INSIDE VIEW SCREW - 2" WP04 (x2) 382 (x4) SCREW - 1 3/4" 68 H100382 H100391 DESCRIPTION SCREW PFH 8x1 3/4 BLK SCREW PFH 8x2 BLK
PAGE 69
STEP 40 - FORT ASSEMBLY WP03 WALL PANEL - W2A03786 1"x18 7/8"x11 3/4" (24x214x971) WP08 WALL PANEL - W2A03787 1"x18 7/8"x11 3/4" (24x214x971) (x1) (x1) QTY PART NUMBER 6 2 2 2 H100382 H100398 H100405 H101026 DESCRIPTION SCREW PFH 8x1-3/4 BLK T-NUT 1/4 BLK WASHER LOCK EXT 6x15 BLK BOLT WH 1/4x1-3/4 BLK TIP: INSTALL T-NUTS IN WOOD FIRST WP08 (x1) WP03 (x1) 382 (x6) SCREW - 1 3/4" 405 (x2) WASHER - 6x15 026 (x2) BOLT - 1-3/4" 398 (x2) T-NUT - 1/4" 69
PAGE 70
STEP 41 - FORT ASSEMBLY QTY PART NUMBER 2 2 2 7 1 WP05 (x1) WP06 (x1) 1 1 WALL PANEL - W2A03785 1"x16 7/8"x46 1/2" (24x479x971) H100198 H100378 H100379 H100382 H100398 H100405 H101026 WALL PANEL - W2A03780 1"x18 7/8"x11 3/4" (24x479x300) TIP: INSTALL T-NUTS IN WOOD FIRST WP05 (x1) FLUSH TOPS 378 (x2) BOLT - 1 3/4" 198 (x2) WASHER - 8x19 WP06 (x1) 382 (x7) SCREW - 1 3/4" 379 (x2) T-NUT - 5/16" 026 (x1) BOLT - 1-3/4" 405 (x1) WASHER - 6x15 398 (x1) T-NUT - 1/4" 70 DESCRIPTION WASHER LOCK EXT
PAGE 71
STEP 42 - FORT ASSEMBLY QTY PART NUMBER 32 N02 (x8) PICKET - W4L18514 5/8"x2 3/8"x24 3/4" (16x60x628) 2 1/2 in [62 mm] 3 PLACES N02 (x8) LEFT & RIGHT PICKET PLACEMENT USE PICKET PAL (A6P00410) FOR PICKET SPACING 387 (x32) SCREW - 1 1/4" FLUSH BOTH SIDES 71 H100387 DESCRIPTION SCREW PFH 8x1-1/4 BLK
PAGE 72
STEP 43 - FORT ASSEMBLY QTY PART NUMBER 40 N02 (x10) PICKET - W4L18514 5/8"x2 3/8"x24 3/4" (16x60x628) 2 1/8 in [53 mm] 4 PLACES N02 (x10) LEFT & RIGHT PICKET PLACEMENT USE PICKET PAL (A6P00410) FOR PICKET SPACING 387 (x40) SCREW - 1 1/4" FLUSH BOTH SIDES 72 H100387 DESCRIPTION SCREW PFH 8x1-1/4 BLK
PAGE 73
STEP 44 - FORT ASSEMBLY QTY PART NUMBER H100198 H100379 H100407 H100408 2 2 2 6 A6P00836 (x1) GP01 (x1) DESCRIPTION WASHER LOCK EXT 8x19 BLK T-NUT 5/16 BLK BOLT WH 5/16x1 1/2 BLK SCREW PWH 8x1/2 BLK PLASTIC SUNBURST A4M02676 GABLE PANEL - W2A03782 1 1/8"x53 1/2"x16 3/8" (27x1359x414) (x2) BRACKET TIP: INSTALL T-NUTS IN WOOD FIRST 407 (x2) BOLT - 1 1/2" 2676 (x2) 198 (x2) BRACKET WASHER - 8x19 INSTALL BRACKET TO SUNBURST THEN PRE-DRILL USING AN 1/8" [3mm] DRILL BIT 836 (x1) PLASTIC SUNBURST
PAGE 74
STEP 45 - FORT ASSEMBLY QTY 2 2 2 6 A6P00836 (x1) GP01 (x1) PART NUMBER H100198 H100379 H100407 H100408 DESCRIPTION WASHER LOCK EXT 8x19 BLK T-NUT 5/16 BLK BOLT WH 5/16x1 1/2 BLK SCREW PWH 8x1/2 BLK PLASTIC SUNBURST A4M02676 GABLE PANEL - W2A03782 1 1/8"x53 1/2"x16 3/8" (27x1359x414) (x2) BRACKET TIP: INSTALL T-NUTS IN WOOD FIRST 2676 (x1) 407 (x2) BRACKET BOLT - 1 1/2" INSTALL BRACKET TO SUNBURST THEN PRE-DRILL USING AN 1/8" [3mm] DRILL BIT 198 (x2) WASHER - 8x19 836 (x1) 408 (x6) PLAST
PAGE 75
STEP 46 - FORT ASSEMBLY QTY PART NUMBER 12 4 RP2 (x2) TOP ROOF PANEL - W2A04025 1 3/8"x19 1/8"x48 5/8" (35x486x1236) 347 (x12) SCREW - 1 1/4" 382 (x4) SCREW - 1 3/4" RP2 (x2) 75 H100347 H100382 DESCRIPTION SCREW PWH 8x1-1/4 WZ SCREW PFH 8x1 3/4 BLK
PAGE 76
STEP 47 - FORT ASSEMBLY QTY PART NUMBER 8 RP1 (x2) LOWER ROOF PANEL - W2A04024 1 3/8"x19 3/8"x48 5/8" (35x491x1236) 382 (x8) SCREW - 1 3/4" RP1 (x2) 76 H100382 DESCRIPTION SCREW PFH 8x1 3/4 BLK
PAGE 77
STEP 48 - FORT ASSEMBLY QTY PART NUMBER 2 3 A6P00618 (x1) STEERING WHEEL E12 (x1) H100382 H100105 MOUNTING BLOCK - W4L17816 1 3/8"x3"x4 3/4" (36x76x120) TIP: ALIGN PILOT HOLES E12 (x1) 382 (x2) 618 (x1) SCREW - 1 3/4" STEERING WHEEL WASHER FLAT (x1) (INCLUDED WITH STEERING WHEEL) LAG SCREW (x1) (INCLUDED WITH STEERING WHEEL) CENTER CAP (x1) (INCLUDED WITH STEERING WHEEL) NOTE PILOT HOLE LOCATIONS 105 (x3) WASHER - 8x27 77 DESCRIPTION SCREW PFH 8x1 3/4 BLK WASHER FLAT 8x27
PAGE 78
STEP 49 - FORT ASSEMBLY QTY PART NUMBER 2 2 HOLES TOWARD RAIL A6P00596 (x1) TELESCOPE E10 (x1) MOUNTING BLOCK - W4L17815 1 3/8"x3"x4 3/4" (36x76x120) TIP: ALIGN PILOT HOLES 387 (x2) SCREW - 1 1/4" E10 (x1) 382 (x2) SCREW - 1 3/4" 78 H100382 H100387 DESCRIPTION SCREW PFH 8x1 3/4 BLK SCREW PFH 8x1-1/4 BLK
PAGE 79
STEP 50 - FORT ASSEMBLY QTY 2 6 2 8 4 A6P00654 HAND GRIP (x4) GREY PLASTIC PART NUMBER H100397 H100398 H100403 H100405 H101026 DESCRIPTION BOLT WH 1/4x1-1/4 BLK T-NUT 1/4 BLK LAG SCREW WH 1/4x1-1/2 BLK WASHER LOCK EXT 6x15 BLK BOLT WH 1/4x1-3/4 BLK TIP: INSTALL T-NUTS IN WOOD FIRST 654 (x4) HAND GRIP GREY PLASTIC 398 (x6) T-NUT - 1/4" 405 (x8) 397 (x2) WASHER - 6x15 403 (x2) LAG SCREW - 1 1/2" BOLT - 1 1/4" 026 (x4) BOLT - 1-3/4" 79
PAGE 80
STEP 51 - FORT ASSEMBLY QTY PART NUMBER 8 TOP 21 1/8 in [538 mm] A6P00324 CHALK BOARD (x1) LARGE TIP: CENTER CHALK BOARD ON WALL AS SHOWN.
PAGE 81
STEP 1 - FINAL ASSEMBLY QTY PART NUMBER 2 2 378 (x2) BOLT - 1 3/4" 198 (x2) WASHER - 8x19 ROCK WALL ASSEMBLY 81 H100198 H100378 DESCRIPTION WASHER LOCK EXT 8x19 BLK BOLT WH 5/16x1 3/4 BLK
PAGE 82
STEP 2 - FINAL ASSEMBLY A6P00537 (x1) CLIMBING ROPE TIE KNOT 17 1/2 in [444 mm] 3 PLACES TIE KNOTS APPROXIMATELY AS SHOWN 537 (x1) CLIMBING ROPE TIE KNOT 82
PAGE 83
STEP 3 - FINAL ASSEMBLY QTY PART NUMBER 2 2 A6P00554 (x1) H100379 H100468 DESCRIPTION T-NUT 5/16 BLK BOLT WH 5/16x1 BLK 8' BLOW MOLDED SLIDE - GREY 3 1/4 in [83 mm] 3 3/8 in [86 mm] 3 1/4 in [81 mm] LOCATE SLIDE IN OPENING USING DIMENSIONS SHOWN. USING SLIDE AS A TEMPLATE, DRILL (2) 3/8" [10 mm] HOLES THROUGH DECK. FINISH BY INSTALLING SLIDE USING PROVIDED HARDWARE.
PAGE 84
STEP 4 - FINAL ASSEMBLY QTY PART NUMBER 4 4 4 H100477 H100478 H100498 478 (x4) WASHER - 8x27 477 (x4) WASHER - 5/16 498 (x4) BOLT - 1 1/2" SWING BEAM ASSEMBLY 84 DESCRIPTION WASHER SPLIT 5/16 BLK WASHER FLAT 8x27 BLK BOLT HEX 5/16x1-1/2 - BLK
PAGE 85
STEP 1 - WEB SWING ASSEMBLY QTY PART NUMBER 4 4 H100831 H100832 DESCRIPTION NUT BARREL PTH BLK 1/4x3/4 BOLT PTH 1/4x3/4 IMPORTANT: SLIDE ROPE LOOPS OVER TUBE ENDS FIRST! SLIDE NARROW END OF TUBES INTO LARGER OPENING AFTER SLIDING ROPE LOOPS ONTO TUBES. 832 (x4) BOLT - 3/4" NOTE: ROPE WEBBING NOT SHOWN IN ILLUSTRATION FOR CLARITY. 831 (x4) NUT BARREL - 3/4" NOTE: IT IS IMPORTANT THAT THE WEB SWING HANG LEVEL. TO ENSURE STRAIGHT SWINGING MOTION, ADJUST BOTH "S" BRACKETS UNTIL WEB SEAT IS LEVEL.
PAGE 86
STEP 5 - FINAL ASSEMBLY A4M02256 (x4) CHAIN BLACK 51.25" A4M00633 QUICK LINK BLK (x4) A6P00595 (x2) SWING SEAT GREY 22" A4M01126 (x1) 26" WEB SWING 2256 (x4) CHAIN BLACK 51.
PAGE 87
STEP 6 - FINAL ASSEMBLY QTY PART NUMBER 6 6 H100379 H100459 DESCRIPTION T-NUT 5/16 BLK BOLT WH 5/16x1 1/4 BLK A4M02252 AUGER GROUND (x6) STAKE TWIST GROUND STAKE INTO GROUND AT LOCATIONS SHOWN. USING AUGER STAKE AS A GUIDE, DRILL A 3/8" [10mm] HOLE FOR HARDWARE. K17 K17 REMOVE 'K17' BEFORE STAKE ASSEMBLY, THEN RE-ATTACH WHEN FINISHED.