Instructions / Assembly

ManualsBrandsBackyard Discovery ManualsGarden Center3 ft. 8 in. x 2 ft. 1 in. Teak Wooden Raised Planter

Table Of Contents

Blank Page

Made in China/Mexico

INS-2204058-A-RAISED TEAK PLANTER-ENG 7-7-2022

Manufactured by:

Backyard Discovery

3305 Airport Drive, Pittsburg, KS

66762 800-856-4445

Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476 J.P. Coenstraat 7, The

Bridge, The Hague, 2595 WP, Netherlands Phone: 08005678990

RAISED TEAK PLANTER

MODEL # : 2204058

THE ASSEMBLY MANUAL MUST BE RETAINED SINCE

IT CONTAINS IMPORTANT INFORMATION

Please visit www.backyarddiscovery.com

For the most up to date assembly manual, to register your product, or to order

replacement parts

Para obtener instrucciones en español, visite

www.backyarddiscovery.com

INSTALLATION

SERVICES

AVAILABLE!

See inside for details

Summary of content (18 pages)

PAGE 1
Manufactured by: Backyard Discovery 3305 Airport Drive, Pittsburg, KS 66762 800-856-4445 Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476 J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 08005678990 RAISED TEAK PLANTER MODEL # : 2204058 THE ASSEMBLY MANUAL MUST BE RETAINED SINCE IT CONTAINS IMPORTANT INFORMATION Please visit www.backyarddiscovery.
PAGE 2
OWNER'S MANUAL - BASIC SETUP DIMENSIONS & ASSEMBLY NOTES It is critically important that you start with square and level footings, concrete pad or deck to attach your structure • Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step.
PAGE 3
OWNER'S MANUAL - PARTS IDENTIFICATION Wood Components (Not to Scale) G01 | LONG SIDE BOARD-W4L16326 (x4) | 7/8"x4 3/4"x41 15/16" (22x120x1066) G02 | SHORT SIDE BOARD-W4L16327 (x4) | 7/8"x4 3/4"x22 5/8" (22x120x574) G03 | SLAT-W4L16328 (x6) | 7/8"x4 3/4"x24 1/2" (22x120x623) Accessory Components (Not to Scale) A4M01503 | POST ASSEMBLY (x2) A4M01502 | POST ASSEMBLY (x2) 3
PAGE 4
OWNER'S MANUAL - PARTS IDENTIFICATION Accessory Components (Not to Scale) A4M01504 | SUPPORT ANGLE (x2) A6P00510 | PLANTER LINER (x1) A4M01229 | PRODUCT NUMBER TAG (x1) A100241 | BYD ID TAG (x1) Hardware Components (Not to Scale) H100653 | NUT LOCK BLK (x32) | 1/4 H100202 | SCREW PWH BLK (x50) | 8 x 5/8 H100127 | SCREW PPH BLK (x2) | 4 x 5/8 H100630 | WASHER FLAT BLK (x32) | 8x19 H100397 | BOLT WH BLK (x32) | 1/4 x 1 1/4 H100147 | TORX BIT (x1) | T-30 H101100 | MAGNETIC DRIVER (x1) 4 H100114 |
PAGE 5
PRE-ASSEMBLY STEP 1 - TOOLS REQUIRED Drill Attachments: Phillips Head Open End Wrench - 7/16" Phillips Screw Driver Claw Hammer Cordless Drill or Electric Drill Tape Measure Rubber Mallet - Optional Square Level 24" 5
PAGE 6
PRE-ASSEMBLY STEP 2 - SORTING PARTS It is critical for ease of assembly that you take the time to sort and organize the wood and hardware. WOOD PARTS: • • • • Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01). If there are multiple boards with the same stamped number, stack those pieces together. Stamps can be found on the flat surface of the boards or on the end of the boards.
PAGE 7
STEP 1 - PLANTER ASSEMBLY G02 | SHORT SIDE BOARD-W4L16327 (x4) | 7/8"x4 3/4"x22 5/8" (22x120x574) A4M01502 | POST ASSEMBLY (x2) A4M01503 | POST ASSEMBLY (x2) 7
PAGE 8
STEP 2 - PLANTER ASSEMBLY G01 | LONG SIDE BOARD-W4L16326 (x1) | 7/8"x4 3/4"x41 15/16" (22x120x1066) 8
PAGE 9
STEP 3 - PLANTER ASSEMBLY G01 | LONG SIDE BOARD-W4L16326 (x1) | 7/8"x4 3/4"x41 15/16" (22x120x1066) 9
PAGE 10
STEP 4 - PLANTER ASSEMBLY G01 | LONG SIDE BOARD-W4L16326 (x1) | 7/8"x4 3/4"x41 15/16" (22x120x1066) A4M01504 | SUPPORT ANGLE (x1) 10
PAGE 11
STEP 5 - PLANTER ASSEMBLY G01 | LONG SIDE BOARD-W4L16326 (x1) | 7/8"x4 3/4"x41 15/16" (22x120x1066) A4M01504 | SUPPORT ANGLE (x1) 11
PAGE 12
STEP 6 - PLANTER ASSEMBLY 12
PAGE 13
STEP 7 - PLANTER ASSEMBLY 13
PAGE 14
STEP 8 - PLANTER ASSEMBLY G03 | SLAT-W4L16328 (x6) | 7/8"x4 3/4"x24 1/2" (22x120x623) 14
PAGE 15
STEP 9 - PLANTER ASSEMBLY A4M01229 | PRODUCT NUMBER TAG (x1) 15
PAGE 16
STEP 10 - PLANTER ASSEMBLY A6P00510 | PLANTER LINER (x1) 16
PAGE 17
STEP 11 - PLANTER ASSEMBLY 17
PAGE 18
STEP 12 - PLANTER ASSEMBLY A100241 | BYD ID TAG (x1) 18