> PERGOLA ASSEMBLY JOIST END A4M01282 H101040 | HEX PAN HEAD H101053 | 13/855 1/4360 1/8" Bex 34¢1526) fie) | Mexico (16) Jor Sy J2 | SPLICE BRACKET A4M01270 F3| SHORT ANGLE BRACE A4MO01275 {2} | 1 174%5 3/4" (33x13 120400) (2) | 7 (30x 101x355) H101054 WASHER (16) XY DO NOT FULLY TIGHTEN BOLTS AT THIS STEP 61 (x1) 92 id JOIST END ats SPLICE BRACKET or a £3 (x1) 040 (x8) SHORT ANGLE BRACE BOLT M6x20 J2 SLIDES INTO C1 LINE UP THREE HOLES ON 42 WITH THREE HOLES ON C1 AND INSERT BOLTS TOP AND BOTTOM: 053 (xd)
> PERGOLA ASSEMBLY — j 5 H101040 | MAIDENHEAD 14101053] STEEL WASHER in ps |e ees Age C2) JOIST END A4M01283 (2) 13/8°5 1/460 1/8" (36x134x1526) F4 SHORT ANGLE BRACE A4M01276 (2}] 1 1/854 14° (30x 101x355) SLIDE C2 ONTO SPLICE BRACKET. STAND UP ASSEMBLY ON END WITH PACKAGING CARDBOARD ON GROUND, TAP UNTIL GAP {8 GONE THEN TIGHTEN ALL BOLTS ON JOIST.
> PERGOLA ASSEMBLY STEP POST Admonish A2) POST AaM01261 H101040 | HEX PINHEAD H101043 | HEX SOCKET SCREW (2) | 65x88" (152x15202235) @) | 5688" (152¢152x2235) Méx1x20 (16} M6x1x20 joist ‘ASSEMBLY FROM PREVIOUS STEPS H1 0083 STE STEEL WASHER Ho os4 RUBBER WASHER 6x20 LAY PARTS ON GROUND OR SAW | HORSES FOR EASE OF ASSEMBLY. r 043 (x8) £ i BOLT ho ENSURE UPPER BOLT HOLES) 1 ARE FACING OUT ON POSTS.
H101040 | HEX PAN HEAD 8 | Msxix20 G'1| POST FOOT PLATE AGM01278 G2, POST FOOT A4M01279 4 21/838 3/858 3/8" (542135213) | 25/859 78% 778° (68x250x250) SLIDE A POST FOOT ONTO EACH POST THEN BOLT ON POST FOOT PLATES TO EACH POST. VERTICAL TAB ON POST FOOT PLATE LINES UP WITH HOLES ON SIDE OF POST. BOLT ~ M6x20 Na 53 (x4) N STEEL WASHER 6x20 POST FOOT PLATE 054 (x4) RUBBER'WASHER «6x20 REPEAT THIS STEP FOR OTHER UPRIGHT ASSEMBLY.
> PERGOLA ASSEMBLY Bond CHRISTENDOM A4M01280 F1| LONG ANGLE BRACE A4M01273 . H101040 | MAIDENHEAD H101053| STEEL WASHER (2) | 7 3/85 1/2" (36x1 341232) 2} 1 1/8421 1/2" (30x101x546) 621 Mexico 22 exam JOIST END A4M01281 F2| LONG ANGLE BRACE A4M01274 (2) | 13/8%5 1/4748 1/2" (36x134x1232) 1 1/2" (30x101x546) a R WASHER 6x20 SLIDE BT ONTO SPLICE BRACKET. STAND UP ASSEMBLY. ON END WITH PACKAGING CARDBOARD ON GROUND.
yy H101040 | HEX PAN HEAD H101043 | HEX SOCKET SCREW 8 | M6x1x20 (16) Méx1x20 a) UPRIGHT ASSEMBLY FROM PREVIOUS STEPS wor free H101053|STEELWASHER ~~ H101054) RUBBER WASHER [sirs masseuse FROM PREVIOUS STEPS ® 6x20 WITH BOTH UPRIGHT ASSEMBLIES STANDING, ONE JOIST ASSEMBLY | 15 BOLTED ON WITHOUT FULLY TIGHTENING BOLTS. ONCE ONE JOIST ASSEMBLY 15 BOLTED ON, BOLT ON SECOND JOIST ASSEMBLY UPRIGHT ASSEMBLY (x2) ‘ge.
> PERGOLA ASSEMBLY STEP FOOT PLASTIC PLATE A6P00464 @ | 3/3 1/88 1/8" (132075207) LIFT UP EACH POST AND SLIDE A FONT PLASTIC PLATE UNDER EACH POST FOOT PLATE.
> PERGOLA ASSEMBLY Dun Mexicali 08 | 6x20 D1 JOIST END A4MD1284 J3 | SPLICE BRACKET A4M01271 4] 15/83 1/8° (40x300c1526} 8) | 3/4" (37x7 75400) H101054] 8) H101040 MAIDENHEAD ~~ H101053| STEEL WASHER BOLT = M6x20 053 (xd 7 i STEEL Wash Er CE 054 xd) RUBBER WASHER + 6x20 Jan) SPLICE BRACKET SLIDE J3 INTO D1. LINE UR THREE HOLES IN J3 WITH THREE HOLES IN D1 AND INSERT BOLTS INTO TWO OUTER HOLES TOP AND BOTTOM. Lee ES pal JOIST END XY DQ NOT FULLY TIGHTEN BOLTS AT THIS STEP. i COMPLETE THIS: STEP. FOUR TIMES.
H101042 | HEX PAN HEAD ® | Méxixi00 HI01053| STEEL WASHER © 6x20 I 4 JOIST ASSEMBLY FROM PREVIOUS STEPS BOLT ONE SIDE OF JOISTS FIRST THEN BOLT OTHER} SIDE. DO NOT FULLY TIGHTEN BOLTS AT THIS STEP.
> PERGOLA ASSEMBLY Sn H101040 MAIDENHEAD 14101053| STEEL WASHER I : 0) [arias “as |6x0 D2, JOIST END A4M01285 J3 | SPLICE BRACKET AGM01271 (10) 15/83 1/860 1/8" (4080x1526) 110] 1 1725315 3/4" (3777x400) 453 (xd) J : STEEL WASHER 6x20 or Mexico 054 (x4) RUBBER WASHER ~ 6x20 SLIDE INTO D2 LINE UP TWO HOLES INJECT WITH TWO HOLES INDIANAN INERT BOLTS TOP-AND-BOTTOM. a So enn Yi DO NOT FULLY TIGHTEN BOLTS AT THIS STEP g COMPLETE THIS STEP TEN TIMES.
> PERGOLA ASSEMBLY STEP 15 ool PURLOIN A4M01277 (10) 3/41 3/8" (20x40x1534) H2, 2. WAY SQUARE PLUGA6P00465 120) 3/851 5/82" C0x40652) SLIDE A 22WAY SQUARE PLUG INTO EACH END OF PURLOIN J a HZ (x2) 2. WAY SQUARE PLUG COMPLETE THIS STEP TEN TIMES, NOTE: A RUBBER MALLET MAY BE HELPFUL TO GET THE | Z-WAY SQUARE PLUGS INTO THE ENDS OF THE PURLOIN.
> PERGOLA ASSEMBLY Duse H101041 | HEX PAN HEAD H101053| = | Re moe washes ASSEMBLY FROM PREVIOUS STEPS H101054| RUBBER WASHER 20 |6x20 041 (x20) BOLT M6x40 BOLT EACH SIDE OF EACH PURINE BEFORE ATTACHING NEXT ONE.
STEP 18 H1| HOLE cover AdM01352 32} H1 (x32) HOLE COVER USE A SMALL PIECE OF WOOD TO TAP HOLE COVERS IN WITH A RUBBER MALLET.
2 pe red i Sa05a1a J wa ein J Electrical ENCLOSURE 4 FOR ELECTRICAL ENCLOSURE INSTALLATION REFER TO ASSEMBLY INSTRUCTIONS THAT COMES PACKAGED WITH THE ELECTRICAL ENCLOSURE KIT. INSTALL ON ANY POST THAT IS DESIRED. FOLLOW DIRECTIONS FOR PROPER INSTALLATION.
