> CABANA ASSEMBLY H101040 | HEX PAN HEAD . * {12} | Mexico H101053 | STEEL WASHER (12) | 6x20 B2 | JOIST END A4M01343 (2) 1 38°%5 1/8" (36x134x 1171) H101054 | SEALANT WASHER (12) COMPLETE THIS STEP TWICE. (> a BOLT = M6x20 053 (x6) STEEL WASHER » 6X20 054 (x6) SEALANT WASHER B2 (x1) ‘SLIDE B2 ONTO SPLICE BRACKET. STAND UP ASSEMBLY JOIST END ON END WITH PACKAGING CARDBOARD ON GROUND.
CABANA WITH Pan STEP 3 FOR: 9205529, 9205543 H101040 | HEX PAN HEAD (1}| JOIST ASSEMBLY FROM PREVIOUS STEPS © |Méx1x20 H101053 | STEEL WASHER | ® |6x20 APOSTASY AMO1339 F1 BRACE A4M01324 = (1) 5 1/25 1/2" (140x140x2223) (1) 3 1/8%3 1/2x84 1/8" (80x90x2137) H101043 | HEX SOCKET SCREW © | Mexico : Ee H101054 | SEALANT WASHER A2 | POST A4M01340 F2 | BRACE A4M01325 © 0) 5 1/2x5 12%87 1/2" (140 140x2223) 0] 2 18%3 172x84 1/8" (80x90x2137) 043 (x8) BOLT M6x20 ENSURE THAT THESE HOLES ARE ORIENTED CORRECTLY.
CABANA WITH @ SEATING ASSEMBLY STEP 5 FOR: 9205529, 9205543 [J] p-oist ASSEMBLY FROM PREVIOUS STEPS H101040 | HEX PAN HEAD (10) |Méx1x20 APOSTATE A4MD1341 (1) 5 1/25 1/2" (140x140x2228) M|POST FOOT COVER AIM01335 [ F1 | BRACE A4M01324 (1)] 3 172x84 1/8" (80x90x2137} F2 | BRACE A4M01325 (113 178'%3 172x384 1/8" (80xB0x2137) I | 3 18x10 1/810 175" (B1x256x256) & POSTPONE FOOT AdM01338 (1) 2 1787 7/8" (54x 201x201) H101043 | HEX SOCKET SCREW 8 | Méx1x20 H101054 | SEALANT WASHER (19) 043 (x8) BOLT M6x20 SLIDE P
@ SEATING ASSEMBLY (1 [worst ASSEMBLY FROM PREVIOUS STEPS H101040 | HEX PAN HEAD (10) | Mbx1x20 H101053 | STEEL WASHER re (10) | 6x20 A3| POST AdMb1414 M|POST FOOT COVER A4M01335 A (1)| 5 1/25 1/2" (140x140x2223) (113 1/8510 1/810 1/8" (B1x256x258) H101043 | HEX SOCKET SCREW @ |Msx1x20 F1 | BRACE A4M01408 2)| 3 1/83 1/8" (80x50x2137) H101054 | SEALANT WASHER N1 | POST FOOT A4M01336 17857 787 718 (59x201x201) 043 (x8) BOLT Moxie LIED POST FOOT COVER ONTO POST: NEXT ¢ OLT POST FOOT ONTO POST.
> CABANA ASSEMBLY o C [JOIST END AdM07344 H101040 | HEX PAN HEAD (lt ws 14x72 172" (38x134x1842) (10) | Mexico H101053 | STEEL WASHER (10) | 6x20 D7 |JOIST A4M01351 H101054 | SEALANT WASHER (19) (2)|3 1/4" 14 1/8" (80x 134x360} BOLT M6x20 053 (x10) STEEL WASHER 8x20 054 (x10) SEALANT WASHER {SLIDE:C ONTO SPLICE BRACKET STAND UP ASSEMBLYMEN END WITH PACKAGING CARDBOARD ON GROUND. TAP UNTIL GAP {GONE THEN TIGHTEN ALL BOLTS ON JOIST. Cit) JOIST END ONCE CIS BOLTED INTO PLACE, BOLT ONTO DY JOISTS. ENSURE THAT .
S11) N2 | FOOT PLASTIC PLATE A6P00472 (3}| 38%7 5/87 5/8" (11x196x195) LIFT UP EACH POST AND SLIDE A FOOT PLASTIC PLATE: UNDER EACH ONE N2 (x3) FOOT PLASTIC PLATE
PANEL RAIL A4M01323 (8)| 1 5/84 34°45 1/4" (40x122x1150) E1 | PANEL RAIL A4M01322 (4)] 3 1/854 ¥4%84 1/8" (30x122x2137) IF DIFFICULTY SLIDING PANEL RAIL ASSEMBLY INTO COMPLETE THIS PANEL RAIL OCCURS, TRY LOOSENING SCREWS SLIGHTLY. STEP TWICE. PANEL BAIL ASSEMBLIES SLIDE INTO PANEL RAIL TOP AND BOTTOM AS SHOWN. E3{X3) £3 (x) DECORATIVE PANEL PANEL RAIL E1 (x2) PANEL/RAIL {SLIDE PANEL INTO RAIL TOP AND BLOTTO IAS SHOWN. ENSURE THAT MIDDLE PANE 18 FLIPPED OPPOSITE: OF OUTSIDE TWO.
STEP 11 H101050 | SCREW 8 [48x32 COMPLETE THIS STEP TWICE. ONCE ALL PANELS AND PANEL RAIL ASSEMBLIES ARE SLID INTO PLACE SCREW IN SCREWS TO LOCK IN PLACE. 050 (x4) SCREW 48x32 NOTE HOLE ORIENTATION.
H101040| HEX PAN HEAD (16) | M6x1x20 Hoes 8) 6x20 H101054 | SEALANT WASHER (16) BOLT PANEL ASSEMBLIES INTO FRAME. Boru CORRECT ORIENTATION WHEN DOING SC. Cs (8a) mR prime TT Ja ™ LOOSEN THESE BOLTS FRIAR TO BOLTING IN ENCL ASSEMBLIES. ONCE PANEL ASSEMBLIES REIN PLACE FULLY TIGHTEN THEM.
Q | HOLE COVER A4M01352 2 USE A'SMALL PIECE OF WOOD TQ TAP HOLE COVERS WITHIN RUBBER MALLET, Q (x24) HOLE COVER 34
=: 2p Owner's Manual R= Le PRODUCT IS FINISHED FOR CUSTOMERS ASSEMBLING CABANAS WITH FURNITURE: 2102569, 2102576, 2102583, 2102590, 2102613, 2102620, 2102637, 2102644 CONTINUE ON TO NEXT STEP.
H101040 | HEX PAN HEAD @ |mexix20 Helios STEEL WASHER Hs HOS exons T' H101054| SEALANT WASHER 8 ENSURE ALL LEGS OF THE TABLE ARE ON 7” THE GROUND, AND THE TABLE TOP IS LEVEL.
> CABANA ASSEMBLY ON ABPO0392 [SEAT CUSHION Diaspora seat cushion ASPERGER seat cushion AGP0S455| BACK CUSHION AGPO0393 | BACK CUSHION AGPOS295| BACK CUSHION ASPOS4T?| BACK CUSHION 393, 395, 455, OR 477 {xd} BACK CUSHION 392, 394, 454, OR 476 (x2) SEAT CUSHION
