Full Product Manual
Owner's Manual
Basic Setup Dimensions & Assembly Notes
1'-10"
[.6 m]
2'-4 3/8"
[.7 m]
7'-8 1/2"
[2.4 m]
4'-7 1/8"
[1.4 m]
NOT TO EXCEED 600 LBS
MINIMUM OF 8" OFF THE GROUND
• Pay close attention to the items needed for each step. Make sure you are using the correct hardware for
e
ach step. Using incorrect hardware may result in improper assembly.
It is critically important that you start with level ground or surface to ensure safety and your product’s
longevity
Check carefully for overhead lines and ensure there is at least 6ft (2m) clearance from the roof to any
overhead lines.
10