FARMHOUSE PORCH SWING Model # 2006614 Owner's Manual & Assembly Instructions MANUFACTURED BY: Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 800-856-4445 average 2 person assembly time assembly time may vary based on skill level For the most up to date assembly manual, to register your set, or to order replacement parts please visit www.backyarddiscovery.com SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE IN THE EVENT THAT YOU NEED TO ORDER REPLACEMENT PARTS.
INSTALLATION SERVICES AVAILABLE!* Need a helping hand? Let our team of professionals handle the installation for you! *Installation services are only available to U.S. customers. With Go Configure, we bring you 18 years of experience right to your doorstep. We service a wide array of indoor and outdoor recreation products that most consumers don’t have the time or ability to deliver & install themselves.
Owner’s Manual Please Read This Before Starting Assembly MISSING A PART? CALL US BEFORE GOING BACK TO THE STORE The store where you made your purchase does not stock parts for this item. If you have assembly questions or you are missing or have damaged parts, please call 1-800-856-4445 you can also visit www.backyarddiscovery.com or e-mail customerservice@backyarddiscovery.
Owner’s Manual Limited Warranty Please read entire booklet completely before beginning the assembly process Please retain these instructions and your receipt for future reference. Keep them in a safe place where you can refer to them as needed. In order to provide you with the most efficient service, it is required that you provide us with the part numbers when ordering parts. For Your Records: Please take time and fill out the information below. This information will be needed for warranty issues.
Owner’s Manual Safety Warnings and Maintenance Instructions WARNING IT IS IMPORTANT TO CHECK AND TIGHTEN ALL HARDWARE AT THE BEGINNING AND DURING THE SEASON AS THEY MAY LOOSEN DUE TO WOOD EXPANSION AND CONTRACTION. • DO NOT climb or walk on the roof for any reason • Requires two or more people to assemble safely period. • Check for underground utilities before digging or • Check all coverings for bolts and sharp edges twice driving stakes into the ground.
Owner’s Manual Instructions for Proper Maintenance Your Backyard Discovery structure is designed and constructed of quality materials. As with all outdoor products it will weather and wear. To maximize the enjoyment, safety and life of your structure it is important that you properly maintain it. About Our Wood Backyard Discovery uses 100% Cedar (C. Lanceolata) wood.
Owner’s Manual Assembly Tips Protrusion Hazard Incorrect Correct If you see exposed threads and your bolt protrudes beyond the T-Nut you may have over tightened the bolt or used incorrect hardware. If you’ve overtightened, remove the bolt and add washers to eliminate the protrusion. 1/8” Proper Hardware Assembly BOLT Bolt and T-Nut Assembly Tap T-nut into the provided hole. Insert your bolt through the lock washer and insert into the provided hole opposite from the T-Nut.
Owner’s Manual Assembly Tips ASSEMBLY TIP: Keep and eye out for these boxes which will contain helpful pictures and information making the assembly process as quick and painless as possible. Sorting Wood E1 E2 F1 F2 G1 G2 When removing the wood from the boxes we recommend arranging them by part number before you begin assembly. This will allow for faster assembly and easily identify any parts that may be missing or damaged.
Owner's Manual Tools Required for Installation 9
Owner's Manual Basic Setup Dimensions & Assembly Notes It is critically important that you start with level ground or surface to ensure safety and your product’s longevity Check carefully for overhead lines and ensure there is at least 6ft (2m) clearance from the roof to any overhead lines. Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step. Using incorrect hardware may result in improper assembly. 1'-10" [.6 m] 7'-8 1/2" [2.
Parts Identification Owner's Manual Wood Components (Not to Scale) D1 (x1) E1 E2 1 3/8"x3 3/8"x23 1/4" (36x86x590) (x2) E5 H1 (x2) J1 (x2) 1 3/8"x3 3/8"x20 1/4" (36x86x515) (x1) 1 3/8"x3 3/8"x23 1/4" (36x86x590) (x2) BENCH SUPPORT - W4L13231 E4 CENTER BACK REST SUPPORT - W4L13238 (x1) LEFT ARM REST - W4L13236 1 3/8"x5 1/4"x26 1/8" (36x134x665) (x1) 1 3/8"x5 1/4"x26 1/8" (36x134x665) BACK REST SUPPORT - W4L13230 (x2) E3 D2 RIGHT ARM REST - W4L13234 E6 LEFT X-FRAME - W4L13240 (x2)
Owner's Manual Parts Identification Hardware Components H100202 SCREW PWH BLK (x4) 8x5/8 H100192 NUT BARREL WH BLK (x15) 5/16x7/8 H100387 SCREW PFH BLK (x22) 8x1-1/4 H100479 NUT LOCK BLK (x7) 5/16 H100391 SCREW PFH BLK (x40) 8x2 H100201 SCREW PFH BLK (x4) 8x2-1/2 H100198 WASHER LOCK EXT BLK (x15) 8x19 H100761 BOLT HEX BLK (x7) 5/16x2 H100199 WASHER LOCK EXT BLK (x15) 12x19 H100205 BOLT WH BLK (x7) 5/16x2-1/4 H100474 WASHER FLAT BLK (x13) 9x18 H100416 BOLT WH BLK (x4) 5/16x3 H100503 BOLT WH BLK (x4
Parts Identification Hardware Components A100041 TORX WRENCH (x2) T-40 A100042 TORX BIT (x2) T-40 H100764 (x1) SCREW SETTER 13
Owner's Manual Parts Identification Accessory Components (Not to Scale) A4M00631 (x2) TIE STRAP PLATE BLK A4M00632 (x2) CHAIN SUPPORT BRACKET BLK A4M00633 QUICK LINK BLK (x6) A100241 BYD ID TAG (SMALL) WITHOUT AGES (x1) A100314 (x1) A4M00988 (x2) "A" REVISION TAG PORCH SWING CHAIN A6P00170 (x1) 14 STAIN MARKER
STEP 1 E1 (x2) BACK REST SUPPORT - W4L13230 1 3/8"x3 3/8"x23 1/4" (36x86x590) E2 (x2) E4 (x1) H100205 BOLT WH BLK (x6) 5/16x2-1/4 BENCH SUPPORT - W4L13231 1 3/8"x3 3/8"x20 1/4" (36x86x515) E3 (x1) CENTER BACK REST SUPPORT - W4L13238 1 3/8"x3 3/8"x23 1/4" (36x86x590) CENTER BENCH SUPPORT - W4L13237 1 3/8"x3 3/8"x20 1/4" (36x86x515) H100199 WASHER LOCK EXT BLK (x6) 12x19 H100198 WASHER LOCK EXT BLK (x6) 8x19 H100192 NUT BARREL WH BLK (x6) 5/16x7/8 198 (x6) WASHER - 8x19 205 (x6) BOLT - 2 1/4" E1
STEP 2 H2 (x4) BENCH SEAT BOARD - W4L13232 1"x3 3/8"x47 1/8" (24x86x1198) J1 (x2) FRONT BENCH SEAT BOARD - W4L13235 1"x2"x47 1/8" (24x50x1198) H100391 SCREW PFH BLK (x26) 8x2 NOTE: USE PILOT HOLES IN SUPPORTS TO MOUNT BENCH SEAT BOARDS.
STEP 3 H1 (x2) BACK REST BOARD - W4L13241 1"x3 3/8"x50" (24x86x1270) H100391 SCREW PFH BLK (x10) 8x2 NOTE: USE PILOT HOLES IN SUPPORTS TO MOUNT BACK REST BOARDS.
STEP 4 E5 (x2) LEFT X-FRAME - W4L13240 1 3/8"x3 3/8"x29 1/2" (36x86x750) E6 (x2) RIGHT X-FRAME - W4L13239 1 7/16"x3 3/8"x29 9/16" (36x86x750) H100387 SCREW PFH BLK (x20) 8x1-1/4 NOTE: ATTACH E6 BOARDS BEFORE ATTACHING E5 BOARDS.
STEP 5 H100202 SCREW PWH BLK (x2) 8x5/8 A100241 BYD ID TAG (SMALL) WITHOUT AGES (x1) 241 (x2) BYD ID TAG (SMALL) WITHOUT AGES 202 (x2) SCREW - 5/8" 19
STEP 6 W1 (x2) ARM REST SUPPORT - W4L13233 3"x2"x13" (76x50x330) A4M00632 (x2) H100761 BOLT HEX BLK (x2) 5/16x2 CHAIN SUPPORT BRACKET BLK H100479 NUT LOCK BLK (x2) 5/16 H100192 NUT BARREL WH BLK (x4) 5/16x7/8 H100199 WASHER LOCK EXT BLK (x4) 12x19 H100416 BOLT WH BLK (x4) 5/16x3 H100474 WASHER FLAT BLK (x4) 9x18 H100198 WASHER LOCK EXT BLK (x4) 8x19 W1 (x1) 199 (x4) WASHER - 12x19 192 (x4) NUT BARREL - 7/8" W1 (x1) 479 (x2) NUT - 5/16" 474 (x2) 198 (x4) WASHER - 9x18 WASHER - 8x19 416 (x
STEP 7 (1) D1 - RIGHT ARM REST - W4L13234 1 3/8"x5 1/4"x26 1/8" (36x134x665) H100503 BOLT WH BLK (x4) 5/16x3-1/2 (1) D2 - LEFT ARM REST - W4L13236 1 3/8"x5 1/4"x26 1/8" (36x134x665) H100192 NUT BARREL WH BLK (x4) 5/16x7/8 H100201 SCREW PFH BLK (x4) 8x2-1/2 H100199 WASHER LOCK EXT BLK (x4) 12x19 H100198 WASHER LOCK EXT BLK (x4) 8x19 199 (x4) WASHER - 12x19 192 (x4) NUT BARREL - 7/8" 198 (x4) WASHER - 8x19 503 (x4) BOLT - 3 1/2" 201 (x4) SCREW - 2 1/2" D2 (x1) D1 (x1) 21
STEP 8 A100314 (x1) A4M00631 "A" REVISION TAG H100761 BOLT HEX BLK (x4) 5/16x2 (x2) H100479 NUT LOCK BLK (x4) 5/16 TIE STRAP PLATE BLK H100474 WASHER FLAT BLK (x8) 9x18 H100202 SCREW PWH BLK (x2) 8x5/8 631 (x2) TIE STRAP PLATE BLK 314 (x1) "A" REVISION TAG 202 (x2) SCREW - 5/8" 479 (x4) 761 (x4) NUT - 5/16" BOLT - 5/-16x2" BLK 474 (x4) 474 (x4) WASHER - 9x18 WASHER - 9x18 22
STEP 9 SHORT LONG MEDIUM A4M00633 QUICK LINK BLK (x4) A4M00988 (x2) PORCH SWING CHAIN LONG LONG 988 (x2) PERGOLA SWING CHAIN MEDIUM SHORT MEDIUM SHORT 633 (x2) QUICK LINK BLK 633 (x2) QUICK LINK BLK 23
STEP 10 A4M00633 QUICK LINK BLK (x2) • Before hanging the swing, make sure the support beam or joists in the ceiling will support the weight of the swing and its occupants. If you’re unsure of the ceiling strength please get the advice of an experienced carpenter. • The included quick links may not work for all applications. Get the advice of a professional for an alternative solution.
