Protrusion Hazard #3) Owner's Mania Incorrect protrusion. If you see exposed threads and your bolt protrudes beyond the T-Nut you may have over tightened the bolt or used incorrect hardware. If you've over tightened, remove the bolt and add washers to eliminate the Correct Proper Hardware Assembly Bolt and T-Nut Assembly Tap T-nut into the provided hole. Insert your bolt through the lock washer and insert into the provided hole opposite from the T-Nut. Turn clockwise to thread into T-nut.
#3) Owner's Mania ASSEMBLY TIP: Keep and eye out for these boxes which will contain helpful pictures and information making the assembly process as quick and painless as possible. Sorting Wood When removing the wood from the boxes we recommend arranging them by part number before you begin assembly. This will allow for faster assembly and easily identify any parts that may be missing or damaged.
icons and their uses you will see throughout this manual DEMO You will need to make sure that your assembly is square before tightening your bolts. For proper assembly you will need to ensure that your structure is level before proceeding to the next step. Some steps in the assembly process will require an extra set of hands. Make sure you have a helper available, This icon shows the size of an open ended wrench.
i Owner's Manual Basic Setup Dimensions & Assembly Notes It is critically important that you start with square and level footings, concrete pad or deck to attach your structure . Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step. Using incorrect hardware may result in improper assembly. ¢ Remember to double sack for underground utilities and overhead electrical lines.
