Instructions / Assembly

A HELPER IS REQUIRED FOR THIS STEP.

6 FT SLIDE RAIL RIGHT

(1)

A6P00390

SCREW PFH

8x2 1/2"

(16)

H100090

TIP:

STEP 2

NOTE:

USING A 1/8" DRILL BIT, DRILL PILOT HOLES IN EACH INDENTATION ALONG EACH SIDE RAIL. THERE SHOULD

BE 8 INDENTIONS ON EACH RAIL.

PLACE THE SLIDE RAIL ON FLAT SURFACE. STARTING AT THE BOTTOM, INSERT THE SLIDE BED INTO THE CHANNEL

ON THE INSIDE OF THE RAIL. HOLD THE SLIDE BED IN PLACE WHILE A HELPER BENDS THE SLIDE BED INO THE

CHANNEL. MAKE SURE THE SLIDE BED IS COMPLETELY INSERTED INTO THE CHANNEL.

INSERT THE CENTER SLIDE BRACE INTO THE RESPECTIVE LOCATION. SECURE THE SLIDE BED AND CENTER USING THE

PROVIDED HARDWARE.

REPEAT THIS PROCESS FOR THE OPPOSITE SLIDE RAIL.

SLIDE ASSEMBLY

389

(x1)

6 FT SLIDE RAIL LEFT

390

(x1)

6 FT SLIDE RAIL RIGHT

090

(x16)

SCREW - 2 1/2"

M78

(x1)

SLIDE BRACE

6 FT SLIDE RAIL LEFT

(1)

A6P00389

SLIDE BRACE - W4L13298

5/8"x3 3/8"x14 1/4" (16x86x362)

M78

(1)