MOUNT McKINLEY Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 1-800-856-4445 WOODEN SWING SET MODEL: # 1705012 • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Register your new swing set on-line @ www.backyarddiscovery.com (you will also find any updates on assembly instructions and information to order replacement parts) Features the fastening system.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto.
Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) Wood Chips 7' (2.13m) 10' (3.05m) 11' (3.35m) 10' (3.05m) Double-Shredded bark mulch 6' (1.83m) 10' (3.05m) 11' (3.35m) 7' (2.13m) Engineered Wood Fibers 6' (1.83m) 7' (2.13m) >12' (3.66m) 6' (1.83m) Fine Sand 5' (1.52m) 5' (1.
Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21.
Owner’s Manual Play Set Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment.
Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY 9 HANDBOOK X3.
Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the playset? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. General Information: Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs. per child is recommended for play activities designed for individual use. A maximum of 120 lbs. per child is recommended for play activities designed for multiple child use.
Parts Identification Wood Components (NOT TO SCALE) B1 - UPRIGHT POST - W2A02004 3"x3"x89 1/2" (76x76x2274) (1) B2 - UPRIGHT POST - W4L07119 3"x3"x89 1/2" (76x76x2274) (1) B3 - UPRIGHT POST - W4L07120 3"x3"x89 1/2" (76x76x2274) (1) (1) B4 - UPRIGHT POST - W4L07121 3"x3"x89 1/2" (76x76x2274) (1) E1 - RAIL - W4L07132 1 3/8"x3"x51 7/8" (36x76x1318) (1) E2 - RAIL - W4L07133 1 3/8"x3"x51 7/8" (36x76x1318) (1) E3 - RAIL - W4L07134 1 3/8"x3"x51 7/8" (36x76x1318) E77 - ANGLE BRACE - W4L07154 1 3/8"x3
Parts Identification Wood Components (NOT TO SCALE) (1) H5 - FLOOR SUPPORT - W4L07131 1"x3 3/8"x48 7/8" (24x86x1243) (1) H6 - UPRIGHT - W4L07147 1"x3 3/8"x72" (24x86x1828) (1) H7 - UPRIGHT - W4L07148 1"x3 3/8"x72" (24x86x1828) (2) H8 - ROOF RAIL - W4L07149 1"x3 3/8"x83 7/8" (24x86x2132) (2) H9 - ROOF RAIL - W4L07150 1"x3 3/8"x50 7/8" (24x86x1291) (1) H10 - ROOF RAIL - W4L07151 1"x3 3/8"x48 7/8" (24x86x1243) (2) H11 - DECK BRACE - W4L07296 1"x3 3/8"x17 3/4" (24x86x450) (1) (1) H75 - RIGHT UP
Parts Identification Wood Components (NOT TO SCALE) (1) K2 - GROUND BOARD - W4L07123 5/8"x5 1/4"x89 3/8" (16x134x2270) (1) K3 - GROUND BOARD - W4L07124 5/8"x5 1/4"x50 1/8" (16x134x1274) (1) K4 - GROUND BOARD - W4L07125 5/8"x5 1/4"x23 1/8" (16x134x588) (1) K5 - GROUND BOARD - W4L07135 5/8"x5 1/4"x50 1/4" (16x134x1277) (6) M1 - ROCK WALL BOARD - W4L07136 5/8"x3 3/8"x49" (16x86x1245) (3) M2 - ROCK WALL BOARD - W4L07137 5/8"x3 3/8"x49" (16x86x1245) (3) M3 - ROCK WALL BOARD - W4L07138 5/8"x3 3/8"x4
Parts Identification Wood Components (NOT TO SCALE) (1) (2) M78 - CENTER SLIDE BRACE - W100545 5/8"x3 3/8"x17 1/4" (16x86x438) M102 - ATTACHMENT BOARD - W4L06934 5/8"x3 3/8"x18 1/4" (16x86x462) (1) (1) (1) M77 - SLIDE BRACE - W100544 5/8"x3 3/8"x17 1/4" (16x86x438) M103 - REAR SUPPORT - W4L06932 5/8"x3 3/8"x18 1/4" (16x86x462) SB74 - SWING BEAM EXTENDED - W4L06961 2"x5 1/4"x89 1/2" (50x134x2274) (1) (2) T1 - SUPPORT BOARD - W4L07140 1"x1 3/8"x44 1/8" (24x34x1122) (1) W1 - SUPPORT BOARD - W4L0
Parts Identification Hardware (35) BT - SCREW PFH 8x2 1/2 - H100090 (20) CM - BOLT WH 5/16x1/2 - H100115 (13) BV - SCREW PFH 8x2 1/4 - H100091 (2) C - NUT BARREL WH 5/16x1 1/2 - H100006 (17) CK - SCREW PFH 8x2 - H100111 (11) H - BOLT WH 5/16x1 1/2 - H100010 (19) BS - SCREW PFH 8x1 3/4 - H100089 (15) D - NUT BARREL WH 5/16x7/8 - H100005 (98) BP - SCREW PFH 8x1 1/2 - H100086 (10) J - BOLT WH 5/16x1 3/4 - H100011 (84) BQ - SCREW PFH 8x1 1/4 - H100087 (7) B - NUT BARREL WH 5/16x5/8 - H100004 (56) BR - SCREW P
Parts Identification Hardware (2) KZ - BOLT WH 1/4x1-1/4 - H100142 (2) AN - BOLT HEX 5/16x2-3/4 - H100047 (4) AJ - BOLT HEX 5/16x1 1/4 - H100042 (4) LD - LAG SCREW WH 1/4x2 - H100146 (20) BA - BOLT PTH 1/4x3/4 - H100063 (15) BC - SCREW PWH 8x3/4 - H100070 - T-40 TORX WRENCH - A100041 (2) - T-40 TORX BIT - A100042 (2) - T-30 TORX BIT - H100147 (2) - T-30 TORX WRENCH - H100114 (7) CY - SCREW PWH 8x5/8 - H100128 (2) (6) BZ - 9 1/2" SWING HANGER QUICK LINK - H100099 (3) WG - SWING HANGER QUICK LINK
Parts Identification Hardware (10) CB - WASHER SAFETY 17x30 - H100103 (19) CD - WASHER FLAT 8x27 - H100105 (18) AD - WASHER LOCK EXT 12x19 - H100031 (88) AC - WASHER LOCK EXT 8x19 - H100030 (19) CG - WASHER LOCK INT 8x15 - H100108 (13) KV - WASHER LOCK EXT 6x15 - H100138 (4) BX - WASHER SPLIT 5/16 - H100095
Parts Identification Accessories (NOT TO SCALE) (1) (1) - ROPE LADDER - A6P00161 - CLIMBING ROPE - A6P00120 (2) KN - CHAIN GREEN 31" - A100177 (4) EZ - CHAIN GREEN 51.
Parts Identification Accessories (NOT TO SCALE) (1) - L-BRACKET 2.5x66x127 - A4M00695 (2) GD - L BRACKET 66x66x127 - A100140 (3) - GREEN HC ROCK #2 - A6P00037 (2) - RED HC ROCK #2 - A6P00039 (2) TZ - L BRACKET 2.
(1) H74 - LEFT UPRIGHT - W4L06930 1"x3 3/8"x50 3/4" (24x86x1290) (4) (1) H81 - LADDER RUNG - W4L06933 1"x3 3/8"x17 1/8" (24x86x434) H75 - RIGHT UPRIGHT - W4L06931 1"x3 3/8"x50 3/4" (24x86x1290) LADDER ASSEMBLY STEP 1 (8) SCREW PFH 8x2 SCREW PFH 8x2 (8 PLCS) H81 H74 LADDER ASSEMBLY STEP 2 (8) H75 SCREW PFH 8x2 (8 PLCS) SCREW PFH 8x2
(1) M102 - ATTACHMENT BOARD - W4L06934 5/8"x3 3/8"x18 1/4" (16x86x462) (1) M103 - REAR SUPPORT - W4L06932 5/8"x3 3/8"x18 1/4" (16x86x462) LADDER ASSEMBLY STEP 3 (4) SCREW PFH 8x1 1/2 M103 SCREW PFH 8x1 1/2 (4 PLCS) LADDER ASSEMBLY STEP 4 M102 (4) SCREW PFH 8x1 1/2 FLUSH TO TOP.
(1) SB74 - SWING BEAM EXTENDED - W4L06961 2"x5 1/4"x89 1/2" (50x134x2274) (1) TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326 (2) GD - L BRACKET 66x66x127 - A100140 (1) TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 SWING BEAM ASSEMBLY STEP 1 (3) NUT BARREL WH 5/16x7/8 BOLT HEX 5/16x2-3/4 (2) (3) (2) NUT LOCK 5/16 (4) L BRACKET 66x66x127 (2 PLCS) WASHER FLAT 8x27 (2 PLCS) BOLT HEX 5/16x2-3/4 (2 PLCS) SWING BEAM EXTENSION BRACKET-LEFT (1 PLC) BOLT WH 5/16x1 3/4 (3 PLCS) WASHER FLAT 8x27 (2 P
(1) (2) H80 - GROUND BOARD - W4L07155 1"x3 3/8"x87 3/8" (24x86x2218) (1) E77 - ANGLE BRACE - W4L07154 1 3/8"x3 3/8"x74 3/8" (36x86x1890) (1) H79 - END SUPPORT - W4L06923 1"x3 1/2"x42" (24x86x1072) W71 - SWING BEAM SUPPORT - W4L06963 2"x3 3/8"x49 5/8" (50x86x1260) SWING BEAM ASSEMBLY STEP 2 BOLT WH 5/16x4 1/2 (1) NUT BARREL WH 5/16x1 1/2 (2 PLCS) WASHER LOCK EXT 12x19 (2 PLCS) (7) WASHER LOCK EXT 8x19 (2 PLCS) BOLT WH 5/16x2 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (9) W71 (2) BOLT WH 5/16x2 1/2 (
(6) BZ - 9 1/2" SWING HANGER QUICK LINK - H100099 SWING BEAM ASSEMBLY STEP 3 BOLT WH 5/16x1 3/4 (2 PLCS) (2) NUT LOCK 5/16 (6 PLCS) WASHER FLAT 8x27 (6 PLCS) (6) BOLT WH 5/16x1 3/4 WASHER FLAT 8x27 (2) (6) NUT BARREL WH 5/16x7/8 NUT LOCK 5/16 (6) WASHER SAFETY 17x30 WASHER SAFETY 17x30 (6 PLCS) 9 1/2" SWING HANGER QUICK LINK (6 PLCS) NUT BARREL WH 5/16x7/8 (2 PLCS) NOTE: AS YOU TIGHTEN MAKE SURE SAFETY WASHERS GET WEDGED BETWEEN THE BOARD AND SWING HANGER.
(1) M77 - SLIDE BRACE - W100544 5/8"x3 3/8"x17 1/4" (16x86x438) (1) EM - SLIDE BED 8' YELLOW - A100056 SLIDE ASSEMBLY STEP 1 (3) T-NUT 5/16 (3) BOLT WH 5/16x1/2 SLIDE BED 8' YELLOW (1 PLC) BOLT WH 5/16x1/2 (3 PLCS) T-NUT 5/16 (3 PLCS) M77 USE 'M77' SLIDE BRACE AS A TEMPLATE AND USE A 3/8" DRILL BIT FOR DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. BE SURE TO PLACE SLIDE BRACE UP 1/4" FROM BOTTOM EDGE OF SLIDE BED BEFORE MARKING HOLE PATTERN. TIP: PREBENDING THE ENDS WILL EASE ASSEMBLY.
(1) EL - SLIDE RAIL 8' GREEN LEFT - A100055 (1) EK - SLIDE RAIL 8' GREEN RIGHT - A100054 (2) M78 - CENTER SLIDE BRACE - W100545 5/8"x3 3/8"x17 1/4" (16x86x438) SLIDE ASSEMBLY STEP 2 EK (24) M78 EL NOTE: MAKE CERTAIN SUPPORTS AND SLIDE BED ARE FULLY ENGAGED WITHIN CHANNEL OF SLIDE RAILS. SCREW PFH 8x2 1/2 (24 PLCS) TIP: A HELPER IS REQUIRED FOR THIS STEP.
B1 - UPRIGHT POST - W2A02004 3"x3"x89 1/2" (76x76x2274) (1) (1) B4 - UPRIGHT POST - W4L07121 3"x3"x89 1/2" (76x76x2274) STEP 1 (16) TOP B4 NOTE HOLE LOCATION.
(1) H2 - FLOOR SUPPORT - W4L07128 1"x3 3/8"x52 1/8" (24x86x1324) (1) M7 - ARCHED RAIL - W4L07144 5/8"x3 3/8"x50 7/8" (16x86x1292) STEP 2 (1) K1 - GROUND BOARD - W4L07122 5/8"x5 1/4"x74 1/4" (16x134x1888) (1) H8 - ROOF RAIL - W4L07149 1"x3 3/8"x83 7/8" (24x86x2132) T-NUT 5/16 (2 PLCS) H2 INSIDE SURFACE. (2) LAG SCREW WH 5/16x2 13 11 14 12 15 13 ASSEMBLE T-NUTS INTO BOARD BEFORE INSTALLATION.
(1) (1) B2 - UPRIGHT POST - W4L07119 3"x3"x89 1/2" (76x76x2274) B3 - UPRIGHT POST - W4L07120 3"x3"x89 1/2" (76x76x2274) STEP 3 (16) T-NUT 5/16 T-NUT 5/16 (4 PLCS) T-NUT 5/16 (4 PLCS) TOP LEFT T-NUT 5/16 (4 PLCS) T-NUT 5/16 (4 PLCS) NOTE HOLE LOCATION. B3 INSIDE SURFACE NOTE HOLE LOCATION.
(1) H3 - FLOOR SUPPORT - W4L07129 1"x3 3/8"x52 1/8" (24x86x1324) (1) (1) H8 - ROOF RAIL - W4L07149 1"x3 3/8"x83 7/8" (24x86x2132) (2) K3 - GROUND BOARD - W4L07124 5/8"x5 1/4"x50 1/8" (16x134x1274) M8 - WALL RAIL - W4L07145 5/8"x3 3/8"x50 7/8" (16x86x1292) 11 9 12 10 13 11 14 12 15 13 STEP 4 2 3 1 4 2 5 3 6 4 7 5 8 6 9 7 10 8 ! 10 11 12 13 14 15 16 17 18 19 20 21 8 9 3 4 5 6 7 2 1 1 22 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2
(1) G2 - WALL RAIL - W4L07153 (1) 1"x5 1/4"x48 7/8" (24x134x1243) K2 - GROUND BOARD - W4L07123 5/8"x5 1/4"x89 3/8" (16x134x2270) (1) STEP 5 H5 - FLOOR SUPPORT - W4L07131 1"x3 3/8"x48 7/8" (24x86x1243) (1) M6 - SAFETY RAIL - W4L07143 5/8"x3 3/8"x48 7/8" (16x86x1243) (2) M9 - WALL RAIL - W4L07146 5/8"x3 3/8"x48 7/8" (16x86x1243) T-NUT 5/16 (4 PLCS) G2 INSIDE SURFACE. (10) ASSEMBLE T-NUTS INTO BOARD BEFORE INSTALLATION.
(1) (1) G1 - GROUND BOARD - W4L07126 1"x5 1/4"x79 1/8" (24x134x2010) (1) W1 - SUPPORT BOARD - W4L07156 2"x3 3/8"x78 7/8" (50x86x2005) (1) H4 - FLOOR SUPPORT - W4L07130 1"x3 3/8"x48 7/8" (24x86x1243) - L-BRACKET 2.
(1) K4 - GROUND BOARD - W4L07125 5/8"x5 1/4"x23 1/8" (16x134x587.
(2) H1 - ANGLE BRACE - W4L07127 1"x3 3/8"x46 1/8" (24x86x1173) (2) H11 - DECK BRACE - W4L07296 1"x3 3/8"x17 3/4" (24x86x450) T-NUT 5/16 (2 PLCS) STEP 8 H11 H11 ASSEMBLE T-NUTS BEFORE 'H11' INSTALL.
(1) E1 - RAIL - W4L07132 1 3/8"x3"x51 7/8" (36x76x1318) (1) (1) E3 - RAIL - W4L07134 1 3/8"x3"x51 7/8" (36x76x1318) E2 - RAIL - W4L07133 1 3/8"x3"x51 7/8" (36x76x1318) STEP 9 T-NUT 5/16 (3 PLCS) E1 E3 E2 (1) BOLT WH 5/16x1 1/2 (2) LAG SCREW WH 5/16x2 (4) LAG SCREW WH 5/16x1 1/2 INSIDE SURFACE. ASSEMBLE T-NUTS INTO BOARDS BEFORE INSTALLATION.
(1) K5 - GROUND BOARD - W4L07135 5/8"x5 1/4"x50 1/4" (16x134x1277) STEP 10 (2) (3) LAG SCREW WH 5/16x1 1/2 BOLT WH 5/16x2 (5) WASHER LOCK EXT 8x19 BOLT WH 5/16x2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) K5 BOLT WH 5/16x2 (1 PLC) WASHER LOCK EXT 8x19 (1 PLC) LAG SCREW WH 5/16x1 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS)
(2) J1 - FLOOR JOIST - W4L07139 1"x2 3/8"x50 1/4" (24x60x1275) STEP 11 SCREW PFH 8x2 1/2 (4 PLCS) 5/8" DOWN BOTH FLOOR JOISTS.
(3) (3) M2 - ROCK WALL BOARD - W4L07137 5/8"x3 3/8"x49" (16x86x1245) (3) M3 - ROCK WALL BOARD - W4L07138 5/8"x3 3/8"x49" (16x86x1245) (2) - GREEN HC ROCK #2 - A6P00037 - BLUE HC ROCK #1 - A6P00041 (2) - YELLOW HC ROCK #2 - A6P00043 (2) - RED HC ROCK #2 - A6P00039 STEP 12 ASSEMBLE T-NUTS INTO BOARDS BEFORE ROCK INSTALLATION. ROCK COLOR PLACEMENT IS CONSUMER CHOICE.
(3) (3) M2 - ROCK WALL BOARD - W4L07137 5/8"x3 3/8"x49" (16x86x1245) M3 - ROCK WALL BOARD - W4L07138 5/8"x3 3/8"x49" (16x86x1245) (6) (1) M1 - ROCK WALL BOARD - W4L07136 5/8"x3 3/8"x49" (16x86x1245) M10 - ROCK WALL BOARD - W4L07360 5/8"x3"x49" (16x76x1245) STEP 13 SCREW PFH 8x1 1/4 (78 PLCS) (78) SCREW PFH 8x1 1/4 M10 M3 M1 M2 M1 M3 M1 M2 M1 M3 M1 M2 M1
(4) J2 - FLOOR SUPPORT - W4L06710 1"x2 3/8"x3" (24x60x76) STEP 14 J2 5/8" DOWN TYP (8) SCREW PFH 8x1 3/4 (8 PLCS) H3 J2 J2 J2 H2 SCREW PFH 8x1 3/4
(2) T1 - SUPPORT BOARD - W4L07140 1"x1 3/8"x44 1/8" (24x34x1122) STEP 15 T1 5/8" TYP BOTH SIDES (10) SCREW PFH 8x1 3/4 (10 PLCS) T1 T1 SCREW PFH 8x1 3/4
(2) FP1 - FLOOR PANEL - W2A02005 1 1/4"x17"x48 5/8" (32x432x1242) (2) M4 - FLOOR BOARD - W4L07141 5/8"x3"x42 7/8" (16x76x1090) (1) M5 - FLOOR BOARD - W4L07142 5/8"x3 3/8"x48 7/8" (16x86x1242) STEP 16 SCREW PFH 8x1 1/2 (86 PLCS) (86) SCREW PFH 8x1 1/2 M4 M4 FP1 M5 FP1
(1) H6 - UPRIGHT - W4L07147 1"x3 3/8"x72" (24x86x1828) STEP 17 ASSEMBLE T-NUTS INTO BOARDS BEFORE INSTALLATION.
(1) H7 - UPRIGHT - W4L07148 1"x3 3/8"x72" (24x86x1828) STEP 18 ASSEMBLE T-NUTS INTO BOARDS BEFORE INSTALLATION.
(2) TZ - L BRACKET 2.5x38x50x55 - A100340 SHORT SIDE STEP 19 (4) BOLT WH 5/16x1/2 (2) LONG SIDE TO THE FLOOR BOARD. 2 3/16 LONG SIDE (2) NUT BARREL WH 5/16x7/8 (2) WASHER LOCK EXT 12x19 T-NUT 5/16 BOLT WH 5/16x1/2 (2 PLCS) BOLT WH 5/16x1/2 (2 PLCS) L BRACKET 2.
(6) M44 - PICKET - 42 - W4L07152 5/8"x3 3/8"x21 3/8" (16x86x542) STEP 20 (24) 2 9/16 TYP SCREW PFH 8x1 1/8 (24 PLCS) M44 M44 SCREW PFH 8x1 1/8 2 9/16 TYP 1 13/16 TYP
(7) M44 - PICKET - 42 - W4L07152 5/8"x3 3/8"x21 3/8" (16x86x542) STEP 21 (28) 2 7/16 TYP SCREW PFH 8x1 1/8 M44 1 13/16 TYP SCREW PFH 8x1 1/8 (28 PLCS)
(2) H9 - ROOF RAIL - W4L07150 1"x3 3/8"x50 7/8" (24x86x1291) (1) H10 - ROOF RAIL - W4L07151 1"x3 3/8"x48 7/8" (24x86x1243) STEP 22 SCREW PFH 8x2 1/4 (12 PLCS) (12) SCREW PFH 8x2 1/4 H10 H9 H9
(1) - TARP - A6P00157 STEP 23 (14) SCREW PWH 8x3/4 (14 PLCS) TARP (1 PLC) SCREW PWH 8x3/4
(2) EA - HAND GRIP YELLOW PLASTIC - A100043 STEP 24 WASHER LOCK EXT 6x15 (2 PLCS) BOLT WH 1/4x1-1/4 (2 PLCS) HAND GRIP YELLOW PLASTIC (1 PLC) (2) (2) LAG SCREW WH 1/4x1-1/2 T-NUT 1/4 (2 PLCS) (2) (4) WASHER LOCK EXT 6x15 (2 PLCS) BOLT WH 1/4x1-1/4 T-NUT 1/4 WASHER LOCK EXT 6x15 LAG SCREW WH 1/4x1-1/2 (2 PLCS) HAND GRIP YELLOW PLASTIC (1 PLC) T 4"
(2) EA - HAND GRIP YELLOW PLASTIC - A100043 STEP 25 WASHER LOCK EXT 6x15 (4 PLCS) LAG SCREW WH 1/4x1-1/2 (4 PLCS) (4) (4) LAG SCREW WH 1/4x1-1/2 WASHER LOCK EXT 6x15 HAND GRIP YELLOW PLASTIC (2 PLCS) 4"
STEP 26 (3) SWING HANGER QUICK LINK 86 BOARD (3) WASHER FLAT 8x27 (3) WASHER SAFETY 17x30 (3) NUT LOCK 5/16 NUT LOCK 5/16 (3 PLCS) WASHER FLAT 8x27 (3 PLCS) WASHER SAFETY 17x30 (3 PLCS) SWING HANGER QUICK LINK 86 BOARD (3 PLCS)
(1) LADDER ASSEMBLY STEP 27 (2) BOLT WH 5/16x1 1/2 (2) WASHER LOCK EXT 8x19 BOLT WH 5/16x1 1/2 (2 PLCS) WASHER LOCK EXT 8x19 (2 PLCS) LADDER ASSEMBLY
(1) SWING BEAM ASSEMBLY STEP 28 Y (4) BOLT HEX 5/16x1 1/4 (4) WASHER SPLIT 5/16 (4) WASHER FLAT 8x27 SWING BEAM ASSEMBLY BOLT HEX 5/16x1 1/4 (4 PLCS) WASHER SPLIT 5/16 (4 PLCS) WASHER FLAT 8x27 (4 PLCS)
(2) - SWING SEAT GREEN - A6P00054 (4) FA - QUICK LINK - A100069 (4) EZ - CHAIN GREEN 51.25" - A100068 STEP 29 TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK CHAIN GREEN 51.
(2) KN - CHAIN GREEN 31" - A100177 (2) FA - QUICK LINK - A100069 (1) - TRAPEZE - A6P00034 STEP 30 TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK CHAIN GREEN 31" (2 PLCS) QUICK LINK (2 PLCS) TRAPEZE (1 PLC)
(1) HC - BYD ID TAG (LARGE) 2011 WITH AGES - A100164 STEP 31 BYD ID TAG (LARGE) 2011 WITH AGES (1 PLC) (4) SCREW PWH 8x5/8 (4 PLCS) SCREW PWH 8x5/8
(1) SLIDE ASSEMBLY STEP 32 (3) (3) BOLT WH 5/16x1/2 T-NUT 5/16 BOLT WH 5/16x1/2 (3 PLCS) 5 5 2 5/8 1 3 T-NUT 5/16 (3 PLCS) 13/16 7/16" DRILLING PATTERN
(1) - ROPE LADDER - A6P00161 STEP 33 INSERT ROPE INTO QUICK LINK.
(1) LP - STEERING WHEEL - A100105 STEP 34 (1) LAG SCREW WH 5/16x1 1/2 (1) WASHER FLAT 8x27 (1 PLC) STEERING WHEEL WASHER FLAT 8x27 LAG SCREW WH 5/16x1 1/2 (1 PLC) CAP
(1) - TELESCOPE - A6P00096 STEP 35 TELESCOPE SCREW PFH 8x1 1/4 (2 PLCS) (2) TELESCOPE BASE SCREW PFH 8x1 1/4
(1) - CLIMBING ROPE - A6P00120 STEP 36 SLIP THE END OF THE ROPE THROUGH THE HOLE AND TIE A KNOT TO THE INSIDE OF FORT RAIL. TIE A KNOT APPROX. EVERY 18". CLIMBING ROPE (1 PLC) SLIP THE END OF THE ROPE THROUGH THE HOLE AND TIE A KNOT TO THE INSIDE OF ROCK WALL BOARD.
(1) SQ - "A" REVISION TAG - A100314 STEP 37 SCREW PWH 8x5/8 (2 PLCS) "A" REVISION TAG (1 PLC) (2) SCREW PWH 8x5/8
(6) - GROUND STAKE REBAR - A4M00527 Anchoring Instructions STEP 38 TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE LOCATIONS SHOWN. USING GROUND STAKES AS A GUIDE, DRILL 7/16" DIA HOLES.
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
