CASCADE PLAYHOUSE Model: #1606319 Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 1-800-856-4445 WARNING Adult Assembly Required. Not suitable for children under two years, due to sharp points and small parts. • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Register your new play house on-line @ www.swingsetsonline.com (you will also find any updates on assembly instructions and information to order replacement parts) Features the fastening system.
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó la compra no almacena piezas de este producto.
Owner’s Manual Play Set Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Owner’s Manual Play Set Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Playcenter 1. The Playcenter is designed to be installed on a level surface by an Adult with an Adult helper. Place in a flat area of your yard to minimize ground preparation. 2. Choose a level location for the equipment. This can reduce the likelihood of the play set tipping over and loose-fill surfacing material washing away during heavy rains. 3.
Owner’s Manual Play Set The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12" (304mm) to 9" (228mm) Wood Chips 7' (2.13m) 10' (3.05m) 11' (3.35m) 10' (3.05m) Double-Shredded bark mulch 6' (1.83m) 10' (3.05m) 11' (3.35m) 7' (2.13m) Engineered Wood Fibers 6' (1.83m) 7' (2.13m) >12' (3.66m) 6' (1.83m) Fine Sand 5' (1.52m) 5' (1.
Owner’s Manual Play Set 18. Verify that any suspended climbing ropes, chain, or cable are secured at both ends and that they cannot be looped back on it. 19. Instruct children not to attach items to the playground equipment that are not specifically designed for use with the equipment, such as, but not limited to, jump ropes, clothesline, pet leashes, cables and chain as they may cause a strangulation hazard. 20. Instruct children to never wrap their legs around swing chain. 21.
Owner’s Manual Play Set Additional Maintenance: • Check the swing beam and hardware every two weeks due to wood expansion and contraction. It is particularly important that this procedure be followed at the beginning of each season. • Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sand may be necessary to maintain a safe playing environment.
Owner’s Manual Play Set APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information: www.cpsc.gov/cpscpub/pubs/323.html. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY 9 HANDBOOK X3.
Play Set Assembly Manual FAQs: 1. Does the area for the playset need to be level? Yes. Backyard Discovery recommends the playset be positioned on a flat level area for maximum safety and durability. The stakes provided should be used to secure it firmly to the ground. 2. What size area is recommended for the playset? Backyard Discovery recommends at least a 6’ (six foot) perimeter around and above the playset for maximum safety. 3.
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.
SAFETY AND ASSEMBLY INFORMATION SELECTING THE CORRECT LOCATION FOR YOUR PLAY PRODUCT IS IMPORTANT FOR YOUR CHILDREN’S SAFETY AND THE PRODUCT’S LONGEVITY Dimensions: • The Chalet has one layout option. Layout Ground Dimension 3 1 1 4'-4 4" x 5'-11 4" x 67 4" Tall General Information: Safe Play Area* 3 1 16'-4 4" x 17'-11 4" *Level Ground Surface - See below Your set has been designed and engineered for children only and for residential use only. A maximum of 150 lbs.
Parts Identification Wood Components (NOT TO SCALE) A2 - BENCH POST - W4L06162 (2) 2"x2"x18 1/4" (50x50x465) G1 - FRONT ANGLED HEADER - W4L06155 (1) 1"x5 1/4"x45" (24x134x1142) G2 - WALL SUPPORT - W4L05067 (1) 1"x5 1/4"x5 7/8" (24x134x150) H1 - LEFT HEADER - W4L06152 (1) 1"x3 3/8"x44 3/8" (24x86x1127) H2 - RIGHT HEADER - W4L06153 (1) 1"x3 3/8"x44 3/8" (24x86x1127) H3 - REAR ANGLED HEADER - W4L06154 (1) 1"x3 3/8"x42 7/8" (24x86x1088) J1 - SUPPORT BOARD - W4L05068 (2) 1"x2 3/8"x6 3/4" (24x60x170)
Parts Identification Wood Components (NOT TO SCALE) M3 - FASCIA BOARD - W4L05064 (4) 5/8"x3 3/8"x35 1/4" (16x86x894) M4 - PERGOLA JOIST - W4L06157 (1) 5/8"x3 3/8"x47 1/2" (16x86x1206) M5 - PERGOLA JOIST - W4L06159 (1) 5/8"x3 3/8"x47 1/2" (16x86x1206) M6 - BENCH SEAT - W4L06164 (4) 5/8"x3 3/8"x18 1/4" (16x86x464) M7 - BENCH ARM REST - W4L06165 (2) 5/8"x3 3/8"x12" (16x86x306) N1 - TIE STRAP - W4L05043 (6) 5/8”x2”x3 1/8” (16x50x80) N2 - BENCH SEAT SUPPORT - W4L06161 (2) 5/8"x2 3/8"x14" (16x60x355
Parts Identification Wood Components (NOT TO SCALE) O1 - BENCH SAFETY RAIL - W4L06167 (2) 5/8"x1 3/8"x11 1/8" (16x34x284) P1 - PERGOLA POST - W4L06158 (1) 2"x2"x44 3/4" (50x50x1138) P2 - PERGOLA POST - W4L06160 (1) 2"x2"x44 3/4" (50x50x1138) T1 - CORNER BENCH BRACE - W4L06166 (2) 1"x1"x12 1/8" (24x24x309) (1) WP1 - RIGHT REAR ASSEMBLY - W2A01592 44 3/8"x45"x41 3/4" (1127x1143x1061) WP3 - RIGHT FRONT WALL PANEL - W2A01874 (1) 1"x14"x39 3/4" (27x355x1010) (1) WP2 - LEFT FRONT WALL ASSEMBLY - W2A0
Parts Identification Wood Components (NOT TO SCALE) WP5 - RIGHT BENCH BACK ASSEMBLY - W2A01879 (1) 1"x13"x17 5/8" (27x331x448) (1) RP1 - BACK ROOF PANEL - W2A01582 1 3/8"x35"x50" (35x889x1270) GP1 - GABLE END ASSEMBLY - W2A01880 (2) 1"x43 1/8"x21 1/2" (27x1095x547) (1) DP1 - DOOR PANEL ASSEMBLY - W2A01875 1"x15 3/4"x19 3/4" (27x400x500) (1) RP2 - FRONT ROOF PANEL - W2A01877 1 3/8"x35"x50" (35x889x1270) (6) PP1 - PERGOLA ASSEMBLY - W2A01876 4"x4 1/8"x24 3/8" (76x105x600)
Parts Identification Hardware (2) BOLT WH 5/16x3 BLK - H100416 (7) SCREW PFH 8x1/2 - H100124 (117) SCREW PFH 8x1 1/4 - H100087 (2) NUT BARREL WH 5/16x5/8 BLK - H100469 (7) SCREW PFH 8x1 1/2 - H100086 (22) SCREW PFH 8x1 3/4 - H100089 (2) WASHER LOCK EXT 8x19 BLK - H100198 (7) SCREW PFH 8x2 1/2 - H100090 (2) WASHER LOCK EXT 12x19 BLK - H100199 (2) SCREW PFH 8x1/2 BLK - H100203 (4) SCREW PFH 8x1 1/8 BLK - H100386 (6) BOLT WH 1/4x1/2 - H100141 (20) SCREW PFH 8x1 1/4 BLK - H100387 (2) SCREW PFH 8x1-1/2
Parts Identification Accessories (NOT TO SCALE) (8) 90° L-BRACKET - BLK - A4M00555 (1) FAUCET KIT - A6P00024 (1) STOVE KIT - A6P00025 (1) METAL TIE STRAP - A100257 (1) SURFACE MOUNT BASIN - A6P00032 (1) KNOB KIT - A6P00020
Parts Identification Accessories (NOT TO SCALE) (2) HINGE (DOOR, SPRING LOADED) - A100327 (1) LTP ID TAG (SMALL) WITH AGES - A4M00515 (2) - OUTDOOR LIGHT FIXTURE -A6P00068 (1) BELL ASSEMBLY - A4M00554 (1) "A" REVISION TAG - A100314
Parts Identification Accessories (NOT TO SCALE) APPLE WATERMELON CORN ORANGE STRAWBERRY CARROT (1) PLASTIC CURTAIN ROD - A6P00057 PLASTIC KNIFE CUTTING BOARD (1) FRUIT BASKET KIT - A6P00069 (2) CURTAIN - A6P00100
(2) 90° L-BRACKET - BLK - A4M00555 STEP 1: PLAYHOUSE ASSEMBLY 90° L-BRACKET - BLK (1 PLC) (4) SCREW PWH 8x5/8 BLK SCREW PWH 8x5/8 BLK (2 PLCS) PRE-DRILL USING AN 1/8" DRILL BIT TO PREVENT SPLITTING.
(2) 90° L-BRACKET - BLK - A4M00555 STEP 2: 90° L-BRACKET - BLK (1 PLC) (4) SCREW PWH 8x5/8 BLK (2 PLCS) SCREW PWH 8x5/8 BLK WP3 FRONT RIGHT C D REAR LEFT 90° L-BRACKET - BLK (1 PLC) SCREW PWH 8x5/8 BLK (2 PLCS)
H3 - REAR ANGLED HEADER - W4L06154 H1 - LEFT HEADER - W4L06152 (1) 1"x3 3/8"x42 7/8" (24x86x1088) (1) 1"x3 3/8"x44 3/8" (24x86x1127) H2 - RIGHT HEADER - W4L06153 (1) 1"x3 3/8"x44 3/8" (24x86x1127) G1 - FRONT ANGLED HEADER - W4L06155 (1) 1"x5 1/4"x45" (24x134x1142) (2) 90° L-BRACKET - BLK - A4M00555 STEP 3: RIGHT H2 (4) SCREW PWH 8x5/8 BLK H1 H3 LEFT REAR (4) SCREW PFH 8x2 1/2 SCREW PFH 8x2 1/2 (4 PLCS) G1 7/8" 90° L-BRACKET - BLK (2 PLCS) G1 FRONT H1 RIGHT H3 H2 H2 SCREW PWH 8x5/8
N4 - TIE STRAP - W4L05075 (2) 5/8”x2”x5 1/8” (16x50x130) (1) METAL TIE STRAP - A100257 STEP 4: SCREW PFH 8x1 1/4 (12 PLCS) 3 1/4" (8) (12) SCREW PWH 8x3/4 BLK SCREW PFH 8x1 1/4 FLUSH RIGHT LEFT SCREW PWH 8x3/4 BLK (8 PLCS) 2" 17" 2" NOTE: ACHIEVE 17" DIMENSION TO INSURE PROPER DOOR FIT.
N1 - TIE STRAP - W4L05043 (2) 5/8”x2”x3 1/8” (16x50x80) STEP 5: 1 3/8" SCREW PFH 8x1 1/4 (8 PLCS) (8) 1 5/8" N1 LEFT RIGHT SCREW PFH 8x1 1/4
J1 - SUPPORT BOARD - W4L05068 (2) 1"x2 3/8"x6 3/4" (24x60x170) G2 - WALL SUPPORT - W4L05067 (1) 1"x5 1/4"x5 7/8" (24x134x150) (1) "A" REVISION TAG - A100314 STEP 6: LEFT REAR (2) J1 (4) (2) SCREW PWH 8x5/8 BLK SCREW PFH 8x1 1/4 SCREW PFH 8x1 3/4 "A" REVISION TAG (1 PLC) J1 FRONT G2 RIGHT SCREW PWH 8x5/8 BLK (2 PLCS) SCREW PFH 8x1 3/4 (2 PLCS) 11" (G2) 14" (J1) SCREW PFH 8x1 1/4 (4 PLCS)
L1 - CABINET TOP - W4L05076 (1) 5/8"x4 3/8"x42 3/4" (16x112x1087) M1 - FRONT CABINET TOP - W4L05077 (1) 5/8"x3 3/8"x42 3/4" (16x86x1087) STEP 7: REAR L1 M1 SCREW PFH 8x1 1/4 (8 PLCS) (10) SCREW PFH 8x1 1/4 RIGHT LEFT FRONT SCREW PFH 8x1 1/4 (2 PLCS) LEFT RIGHT
N3 - LARGE WINDOW SHELF - W4L05065 (1) 5/8"x2 3/8"x16 1/8" (16x60x409) STEP 8: REAR LEFT (3) SCREW PFH 8x1 1/4 BLK FLUSH FRONT RIGHT SCREW PFH 8x1 1/4 BLK (3 PLCS) N3
N3 - LARGE WINDOW SHELF - W4L05065 (1) 5/8"x2 3/8"x16 1/8" (16x60x409) STEP 9: RIGHT REAR (3) FRONT LEFT SCREW PFH 8x1 1/4 BLK (3 PLCS) N3 SCREW PFH 8x1 1/4 BLK
(1) FAUCET KIT - A6P00024 STEP 10: (2) SCREW PFH 8x1-1/2 BLK SCREW PFH 8x1-1/2 BLK (2 PLCS) 1" FAUCET KIT (1 PLC) LEFT RIGHT FRONT
(1) SURFACE MOUNT BASIN - A6P00032 STEP 11: REAR (2) SCREW PWH 8x5/8 BLK RIGHT LEFT FRONT SURFACE MOUNT BASIN SCREW PWH 8x5/8 BLK (2 PLCS) 3/8"
(1) STOVE KIT - A6P00025 STEP 12: REAR (4) RIGHT LEFT FRONT SCREW PFH 8x1 1/8 BLK (4 PLCS) STOVE KIT SCREW PFH 8x1 1/8 BLK
(2) HINGE (DOOR, SPRING LOADED) - A100327 STEP 13: SCREW PWH 8x3/4 BLK (6 PLCS) HINGE (DOOR, SPRING LOADED) (2 PLCS) (12) SCREW PWH 8x3/4 BLK (6 PLCS) T SCREW PWH 8x3/4 BLK
N5 - DOOR STOP - W4L06156 (1) 5/8"x2 3/8"x3 3/8" (16x60x86) STEP 14: (3) 1" 2" N5 SCREW PFH 8x1 1/4 (3 PLCS) SCREW PFH 8x1 1/4
(1) KNOB KIT - A6P00020 STEP 15: FACE PLATE SCREW PFH 8x3/4 (2 PLCS) KNOB KIT INCLUDED IN KIT LATCH SCREW PFH 8x1 (1 PLCS) INCLUDED IN KIT
N1 - TIE STRAP - W4L05043 (4) 5/8”x2”x3 1/8” (16x50x80) STEP 16: (8) N1 SCREW PFH 8x1 1/4 (8 PLCS) 2" 1 3/4" 1 3/4" 2" SCREW PFH 8x1 1/4
(2) GP1 - GABLE END ASSEMBLY - W2A01880 1"x43 1/8"x21 1/2" (27x1095x547) STEP 17: GP1 (8) SCREW PFH 8x1 1/4 SCREW PFH 8x1 1/4 (4 PLCS) GP1 SCREW PFH 8x1 1/4 (4 PLCS)
(2) 90° L-BRACKET - BLK - A4M00555 RP1 - BACK ROOF PANEL - W2A01582 (1) 1 3/8"x35"x50" (35x889x1270) (1) RP2 - FRONT ROOF PANEL - W2A01877 1 3/8"x35"x50" (35x889x1270) STEP 18: RP2 (4) SCREW PWH 8x5/8 BLK RP1 (12) SCREW PFH 8x1 3/4 90° L-BRACKET - BLK (2 PLCS) SCREW PWH 8x5/8 BLK (4 PLCS) SCREW PFH 8x1 3/4 (12 PLCS)
M3 - FASCIA BOARD - W4L05064 (4) 5/8"x3 3/8"x35 1/4" (16x86x894) STEP 19: (12) SCREW PFH 8x1 1/4 BLK SCREW PFH 8x1 1/4 BLK (6 PLCS) SCREW PFH 8x1 1/4 BLK (6 PLCS) M3
(1) FRUIT BASKET KIT - A6P00069 STEP 20: (6) SCREW PFH 8x1/2 SCREW PFH 8x1/2 (6 PLCS) FRUIT BASKET KIT
(2) - OUTDOOR LIGHT FIXTURE -A6P00068 STEP 21: (4) SCREW PFH 8x1 1/4 AE SCREW PFH 8x1 1/4 (4 PLCS) OUTDOOR LIGHT FIXTURE (2 PLCS)
(1) PLASTIC CURTAIN ROD - A6P00057 J5 - INNER CURTAIN ROD HOLDER - W4L05294 (1) 1"x2 3/8"x2 3/8" (24x60x60) J4 - OUTER CURTAIN ROD HOLDER - W4L05293 (2) CURTAIN - A6P00100 (2) 1"x2 3/8"x2 3/8" (24x60x60) STEP 22: INNER CURTAIN ROD HOLDER (1 PLC) (4) (2) SCREW PFH 8x1 1/4 SCREW PFH 8x1 3/4 PLASTIC CURTAIN ROD (1 PLC) OUTER CURTAIN ROD HOLDER (2 PLCS) SCREW PFH 8x1 3/4 (2 PLCS) CURTAIN (2 PLCS) SCREW PFH 8x1 1/4 (4 PLCS)
N2 - BENCH SEAT SUPPORT - W4L06161 (2) 5/8"x2 3/8"x14" (16x60x355) STEP 23: (8) SCREW PFH 8x1 1/4 (8 PLCS) N2 9 3/4" N2 SCREW PFH 8x1 1/4
T1 - CORNER BENCH BRACE - W4L06166 (2) 1"x1"x12 1/8" (24x24x309) STEP 24: (4) 5/8" SCREW PFH 8x1 3/4 (4 PLCS) T1 12 3/4" 5/8" T1 SCREW PFH 8x1 3/4
(1) WP4 - LEFT BENCH BACK ASSEMBLY - W2A01878 1"x13"x17 5/8" (27x331x448) (1) WP5 - RIGHT BENCH BACK ASSEMBLY - W2A01879 1"x13"x17 5/8" (27x331x448) STEP 25: (6) SCREW PFH 8x1 1/4 WP4 FLUSH (WP4 & WP5) SCREW PFH 8x1 1/4 (6 PLCS) WP5
TOP P1 - PERGOLA POST - W4L06158 (1) 2"x2"x44 3/4" (50x50x1138) P2 - PERGOLA POST - W4L06160 (1) 2"x2"x44 3/4" (50x50x1138) STEP 26: P1 (6) SCREW PFH 8x1 1/4 P2 FLUSH (P1 & P2) SCREW PFH 8x1 1/4 (6 PLCS)
N7 - BENCH SEAT SUPPORT - W4L06163 (2) 5/8"x2 3/8"x11 1/8" (16x60x284) STEP 27: (4) SCREW PFH 8x1 1/4 (4 PLCS) FLUSH FLUSH 9 3/4" N7 N7 SCREW PFH 8x1 1/4
A2 - BENCH POST - W4L06162 (2) 2"x2"x18 1/4" (50x50x465) STEP 28: (4) A2 FLUSH SCREW PFH 8x1 1/4 (4 PLCS) A2 SCREW PFH 8x1 1/4
M6 - BENCH SEAT - W4L06164 (4) 5/8"x3 3/8"x18 1/4" (16x86x464) STEP 29: (16) 1/8" 3/16" M6 SCREW PFH 8x1 1/4 (16 PLCS) FLUSH M6 SCREW PFH 8x1 1/4
M7 - BENCH ARM REST - W4L06165 (2) 5/8"x3 3/8"x12" (16x86x306) STEP 30: (4) (2) SCREW PFH 8x1 1/4 SCREW PFH 8x2 1/2 M7 SCREW PFH 8x1 1/4 (4 PLCS) SCREW PFH 8x2 1/2 (2 PLCS) M7
O1 - BENCH SAFETY RAIL - W4L06167 (2) 5/8"x1 3/8"x11 1/8" (16x34x284) STEP 31: (4) SCREW PFH 8x1 1/4 (4 PLCS) 2 1/2" O1 O1 SCREW PFH 8x1 1/4
M4 - PERGOLA JOIST - W4L06157 (1) 5/8"x3 3/8"x47 1/2" (16x86x1206) M5 - PERGOLA JOIST - W4L06159 (1) 5/8"x3 3/8"x47 1/2" (16x86x1206) STEP 32: (2) WASHER LOCK EXT 8x19 BLK (2) WASHER LOCK EXT 12x19 BLK M4 M5 (2) BOLT WH 5/16x3 BLK (2) NUT BARREL WH 5/16x5/8 BLK WASHER LOCK EXT 12x19 BLK (2 PLCS) NUT BARREL WH 5/16x5/8 BLK (2 PLCS) WASHER LOCK EXT 8x19 BLK (2 PLCS) BOLT WH 5/16x3 BLK (2 PLCS) IMPORTANT NOTE: HAND TIGHTEN ONLY. BOTH ENDS.
(6) PP1 - PERGOLA ASSEMBLY - W2A01876 4"x4 1/8"x24 3/8" (76x105x600) STEP 33: (6) (6) BOLT WH 1/4x1/2 (6) (6) PP1 X6 3" (5 SPCS) SCREW PFH 8x1 1/2 (6 PLCS) SCREW PFH 8x1 1/2 WASHER LOCK EXT 6x15 (6 PLCS) PP1 MATE TO POST SURFACE. BOTH ENDS.
(1) BELL ASSEMBLY - A4M00554 STEP 34: (2) SCREW PWH 8x3/4 BLK AP BELL ASSEMBLY SCREW PWH 8x3/4 BLK (2 PLCS)
(1) LTP ID TAG (SMALL) WITH AGES - A4M00515 STEP 35: (2) SCREW PFH 8x1/2 BLK LTP ID TAG (SMALL) WITH AGES SCREW PFH 8x1/2 BLK (2 PLCS) 7 7/8" 1"
Limited Warranty This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories.
