Assembly Instructions

9
Lighting
1. Make sure all packagings have been removed from the outdoor firepit.
2. Check for obstructions of airflow to the burner Spiders, insects and webs can clog the burner/venturi tube.
A clogged burner tube can lead to a fire.
3. Control knob must be in the “OFF” position (Figure 12).
4. Clear small area of glass beads away from the igniter cover.
5. Connect propane cylinder per “Connecting Propane Cylinder” section.
6. Push and turn control panel counterclockwise to “High” position.
7. Use a match or a lighter to light the fire bowl.
8. Adjust flame to desired height with the control knob.
WARNING:
NEVER light the burner with a cover on the outdoor firepit.
CAUTION:
Keep outdoor gas appliance area clear and free from
combustible materials, gasoline and other flammable vapors
and liquids.
CAUTION:
Do NOT obstruct the flow of combustion and ventilation air.
CAUTION:
Check and clean burner/venturi tubes for insects and insect
nests. A clogged tube can lead to a fire.
9. After lighting, observe the burner flame Make sure all burner ports are lit and flame height
matches illustration (Figures 13-15)
Figure 12 Figure 13
Yellow
Light Blue
Blue
Needs Cleaning
Yellow
Light Blue
Blue
Best Flame
Figure 14 Figure 15
1 in - 10 in
2.5cm-25.4cm