Assembly Instructions

black handle
05
Figure 6
Figure 5
4.
Place the gas cylinder into the cylinder holder. Secure the cylinder by tightening clockwise the butterfly screw
found on the cylinder holder (See Figure 3), so that the cylinder cannot move from side to side or fall down.
Connect the regulator, screw the black handle (See Figure 4) clockwise to tighten, turn the black handle
counterclockwise to remove. The hose must point down. The knob on the control panel is turned all the way to the
“OFF” position when the fire pit is NOT in use.
6. Cover the fire pit with the outdoor Weather cover (C) when not in use to protect it from the elements or when
fire pit is cool COMPLETELY after the use (See Figure 6).
5. Attach the door (B) with fire pit body (A) tenderly (See Figure 5).
Figure 3
Figure 4
A
B
C