Assembly Instructions

Figure 2

ASSEMBLY INSTRUCTIONS

Carefully unpack all parts from the box, compare parts with package content listed above, make sure all parts

are present before beginning assembly of product. If any part is missing or damaged, do not attempt to

assemble the product. Contact customer service for replacement parts.

Put the lava rocks (F) around the burner, then remove the label from the pilot box (See Figure 2). A gas fire pit

requires 13.2 lbs lava rocks.

WARNING: keep children away during assembly, as this item contains lava rocks, which are small pieces and

can be swallowed by children.

NOTE: leave the pilot box uncovered by the lava rocks.

PART DESCRIPTION QUANTITY

1 pc

Lid

Fire Table

Door

Lava rock (13.2 Ibs)

Natural gas orifice

Weather cover

PACKAGE CONTENTS

2 boxes

4. Place the gas cylinder into the cylinder holder. Secure the cylinder by tightening clockwise the butterfly

screw found on the cylinder holder (See Figure 3), so that the cylinder cannot move from side to side or

fall down. Connect the regulator, screw the black handle (See Figure 4) clockwise to tighten, turn the

black handle counterclockwise to remove. The knob on the control panel is turned all the way to the “OFF”

position when the fire pit is NOT in use.

pilot box