Assembly Instructions

033021-1
Made in China
Congratulations!
Your Deck Box is now ready for use.
Step 6
Fold Strap Bracket around the
metal loop at the bottom end
of the lid strap. Then attach the
bottom end of the strap with
Strap Bracket to the left Side
PPanel with a Screw.
Attach the top end of the strap
to the Lid Panel using the other
Screw and the Washer.
Strap Bracket
Strap
Side Panel
Lid
Panel
Step 5
Attach the Lid Support
to the front edge of the
Lid Panel using 4 Self-
Tapping Screws.
Hold the Lid Panel
horizontally and linehorizontally and line
up the Lid Tabs with
Back Panel Hinge Pins.
Push the Lid Panel
horizontally into the
Back Hinge Pins and
rotate the Lid closed
to lock in placto lock in place.
90°
Side Panel
Front
Panel
Hinge Pins
Lid Panel
Lid Tabs
Lid Support
NOTE:
Lock Loop on the Lid Support
should face towards the
outside of the Front Panel.
Step 4
Slide the other Side
Panels into position using
the slots at the side of the
Front and Back Panels.
Push the Side Panel down
and press the and press the Lock-Tabs
into the slots in the Bottom
Panel to lock in place.
Side Panel
Side Panel
Lock-Tab Slots
Step 3
Slide one of the Side
Panels into position using
the slots at the side of the
Front and Back Panels.
Push the Side Panel down
and press the and press the Lock-Tabs
into the slots in the Bottom
Panel to lock in place.
Front Panel
Side Panel
Lock-
Tab
Slots
Bottom Panel
Back Panel
Step 2
Raise the Front and
Back Panels to an upright
position.
Front Panel
Bottom Panel
Back Panel
Step 1
Place the three Linked Panels on a level surface.
Front Panel Bottom Panel Back Panel
Side Panel (2 pcs)
Linked Panels
Back
Bottom
Front
Lid Panel
Strap with Bracket, 2 Screws and 1 Washer
Lid Support Self-Tapping Screws
Parts Included:
Patent Pending
#272-2091
28 Gal. Deck Box Assembly Instructions